i need fulldetails about this paper ....etc

[:=Read Full Message Here=:]

Innovative techniques for electronic road pricing



Most approaches to electronic tolling, electronic road pricing and road user charging, collectively known as electronic fee collection (EFC), have been based on the concept of short-range communication between an in-vehicle unit and roadside equipment, using dedicated short-range communication (DSRC). This paper outlines an alternative approach which is rapidly gaining credibility and interest. The approach is based ....etc

[:=Read Full Message Here=:]

Integrated Implantable Stimulator without Off-Chip Blocking-Capacitors
Presented by:
Shiyad Ashraf
No. 61
College Of Engineering, Trivandrum
2007-11 batch

Contents
Introduction
Working of FES
Need of blocking capacitors
Disadvantages of using blocking capacitors
Methods of protection without off chip capacitors
Technique for avoiding off chip capacitors
Stimulator output stages utilizing blocking capacitors
Current generator circuits
Proposed current generator circuits
Proposed output stage
St ....etc

[:=Read Full Message Here=:]

Electromagnetic Interference (EMI) & Electromagnetic Compatibility (EMC)

INTRODUCTION

¢ EMI-

It consists of any unwanted conducted or radiated signals of electric origin that can cause degradation in system or equipment performance.

¢ EMC-

It is the ability of the system to function as designed without any degradation in performance due to EMI with in the operational environment


Classification of EMI

¢ INTRASYSTEM EMI-

EMI problems with in the system one is dealing with.

¢ INTERSYSTEM EMI-

EMI problem ....etc

[:=Read Full Message Here=:]

HIGH-DENSITY EMI FILTER DESIGN FOR DC-FEDMOTOR DRIVES



INTRODUCTION

Electromagnetic interference (EMI) is one of the major design challenges in motor drive systems, especially in applications where stringent standards need to be followed. EMI noise is usually defined as common-mode (CM) and differential-mode (DM) noise. CM noise is defined as the noise flows between the power circuit and the ground, while DM noise is defined as the current following the sam ....etc

[:=Read Full Message Here=:]

TRANSMISSION MEDIA
The means through which data is transformed from one place to another is called transmission or communication media. There are two categories of transmission media used in computer communications.
I. BOUNDED/GUIDED MEDIA
II. UNBOUNDED/UNGUIDED MEDIA
i. BOUNDED MEDIA:
Bounded media are the physical links through which signals are confined to narrow path. These are also called guide media. Bounded media are made up o a external conductor (Usually Copper) bounded by jacket material. Bounded media are great for LABS b ....etc

[:=Read Full Message Here=:]

HIGH-DENSITY EMI FILTER DESIGN FOR DC-FEDMOTOR DRIVES



INTRODUCTION

Electromagnetic interference (EMI) is one of the major design challenges in motor drive systems, especially in applications where stringent standards need to be followed. EMI noise is usually defined as common-mode (CM) and differential-mode (DM) noise. CM noise is defined as the noise flows between the power circuit and the ground, while DM noise is defined as the current following the sam ....etc

[:=Read Full Message Here=:]

Low-Voltage Differential Signaling (LVDS) is a new technology addressing the needs of today's high performance data transmission applications. The LVDS standard is becoming the most popular differential data transmission standard in the industry. This is driven by two simple features: Gigabits @ milliwatts! LVDS delivers high data rates while consuming significantly less power than competing technologies. In addition, it brings many other benefits, which include:

a)Low-voltage power supply compatibility
b)Low noise generation
c)High no ....etc

[:=Read Full Message Here=:]

1. ABSTRACT
Cracks present in machine parts affect their vibrational behaviour like the fundamental frequency and the resonance. This case is usual in machine parts subjected to fatigue type of loading. In this paper, the resonance response of a cracked cantilever beam has been studied based on fracture mechanics quantities like strain energy release rate, stress intensity factor and compliance. The vibration behaviour of a cantilever beam with cracks at fixed end and at the mid span has been analyzed ....etc

[:=Read Full Message Here=:]

ABSTRACT
After years of research and development, radio frequency light sources are just now becoming a mainstream lighting option. RF light sources follow the same principles of converting electrical power into visible radiation as conventional gas discharge lamps. The fundamental difference between RF lamps is that RF lamps operate without electrodes .
There are three practical ways to energize RF light sources, though there are more ways to create RF plasmas. These three ways correspond to differen ....etc

[:=Read Full Message Here=:]

Am rema,want to know about an efficient common mode hybrid filter used in SMPS for my seminar work.


Abstract obtained from IEEE is After the study of electromagnetic interference (EMI)
mechanisms in switching mode power system (SMPS) and the soft
switch, this paper proposes a novel hybrid filter (HEF) to suppress
commend mode EMI in SMPS. The HEF consists of a passive filter
and an active filter. Matching network, which can reduce
impedance mismatching effects, is introduced in passive part. A
....etc

[:=Read Full Message Here=:]

plz send detailed report of this ....etc

[:=Read Full Message Here=:]

1. Passive and Active Hybrid Integrated EMI Filters
2. Active-Clamping Dual Resonant Converter
3. Implementation and Analysis of an Improved Series-Loaded Resonant DC-DC Converter Operating Above Resonance for Battery Chargers
4. Performance Analysis of PV Grid-connected Power Conditioning System with UPS
5. Positive Voltage Injection Switching Inductor (P-VISI) Method for Fast Transient Response in SMPS under Loading Condition
6. High-Voltage Auxiliary Power Supply Using Series-Connected MOSFETs and Floating Self-Driving Technique
7. Usi ....etc

[:=Read Full Message Here=:]

detailed data of the above topic ....etc

[:=Read Full Message Here=:]

I would like to continue my engineering studies at ur institution. I have completely done my Electrical engineering N1,now i'd like to apply so as to register for next year 2016. ....etc

[:=Read Full Message Here=:]

I am looking to attend an EMIEMC course in Apr. Wanted to see if I could find a course In Boston, Ma. on Apr 18, 19 and 20th
....etc

[:=Read Full Message Here=:]

Electromagnetic Interference (EMI) & Electromagnetic Compatibility (EMC)

INTRODUCTION

¢ EMI-

It consists of any unwanted conducted or radiated signals of electric origin that can cause degradation in system or equipment performance.

¢ EMC-

It is the ability of the system to function as designed without any degradation in performance due to EMI with in the operational environment


Classification of EMI

¢ INTRASYSTEM EMI-

EMI problems with in the system one is dealing with.

¢ INTERSYSTEM EMI-

EMI problem ....etc

[:=Read Full Message Here=:]

i want to urgently getting the questionnaire and literature review of employee retention in Idbi federal and also give me the all information of idbi federal
please give me the questionnaire of employee retention at idbi federal ....etc

[:=Read Full Message Here=:]