I am looking to attend an EMIEMC course in Apr. Wanted to see if I could find a course In Boston, Ma. on Apr 18, 19 and 20th
....etc

[:=Read Full Message Here=:]

1. Passive and Active Hybrid Integrated EMI Filters
2. Active-Clamping Dual Resonant Converter
3. Implementation and Analysis of an Improved Series-Loaded Resonant DC-DC Converter Operating Above Resonance for Battery Chargers
4. Performance Analysis of PV Grid-connected Power Conditioning System with UPS
5. Positive Voltage Injection Switching Inductor (P-VISI) Method for Fast Transient Response in SMPS under Loading Condition
6. High-Voltage Auxiliary Power Supply Using Series-Connected MOSFETs and Floating Self-Driving Technique
7. Usi ....etc

[:=Read Full Message Here=:]

i need fulldetails about this paper ....etc

[:=Read Full Message Here=:]

Am rema,want to know about an efficient common mode hybrid filter used in SMPS for my seminar work.


Abstract obtained from IEEE is After the study of electromagnetic interference (EMI)
mechanisms in switching mode power system (SMPS) and the soft
switch, this paper proposes a novel hybrid filter (HEF) to suppress
commend mode EMI in SMPS. The HEF consists of a passive filter
and an active filter. Matching network, which can reduce
impedance mismatching effects, is introduced in passive part. A
....etc

[:=Read Full Message Here=:]

Electromagnetic Interference (EMI) & Electromagnetic Compatibility (EMC)

INTRODUCTION

¢ EMI-

It consists of any unwanted conducted or radiated signals of electric origin that can cause degradation in system or equipment performance.

¢ EMC-

It is the ability of the system to function as designed without any degradation in performance due to EMI with in the operational environment


Classification of EMI

¢ INTRASYSTEM EMI-

EMI problems with in the system one is dealing with.

¢ INTERSYSTEM EMI-

EMI problem ....etc

[:=Read Full Message Here=:]

Power electronics remains an emerging technology. Two important factors in power electronics system are the switching speed of the devices and the total power loss in the system. If the switching speed can be increased ,improvements may be possible i.e. current ripples in an electrical machine or physical size of passive components may be reduced. Increased switching speed may cause additional losses in a power electronics system and increase the system cooling requirement. A common problem is that high-frequency phenomena like proximity eff ....etc

[:=Read Full Message Here=:]

detailed data of the above topic ....etc

[:=Read Full Message Here=:]

HIGH-DENSITY EMI FILTER DESIGN FOR DC-FEDMOTOR DRIVES



INTRODUCTION

Electromagnetic interference (EMI) is one of the major design challenges in motor drive systems, especially in applications where stringent standards need to be followed. EMI noise is usually defined as common-mode (CM) and differential-mode (DM) noise. CM noise is defined as the noise flows between the power circuit and the ground, while DM noise is defined as the current following the sam ....etc

[:=Read Full Message Here=:]

Power electronics remains an emerging technology. Two important factors in power electronics system are the switching speed of the devices and the total power loss in the system. If the switching speed can be increased ,improvements may be possible i.e. current ripples in an electrical machine or physical size of passive components may be reduced. Increased switching speed may cause additional losses in a power electronics system and increase the system cooling requirement. A common problem is that high-frequency phenomena like proximity eff ....etc

[:=Read Full Message Here=:]

plz send detailed report of this ....etc

[:=Read Full Message Here=:]