requirement if project on vibration analysis with time delay ....etc

[:=Read Full Message Here=:]

An Experimental Study on the Vibration Characteristics of the Rotor Blade with Fiber Reinforced Plastics .

ABSTRACT:

With the current background of increasing oil price, a number of researches on development and supply ofrenewable energy are on process. Wind energy is one of them. Not only as energy itself, but also as travel resources, windenergy is ideal substitute for Korea equipped with appropriate conditions.
The purpose of this paper is that investigates the dynamic behavior characteristic of W.T.S (Wind Turbine System) an ....etc

[:=Read Full Message Here=:]

Abstract —
To avoid unexpected equipment failures and
obtain higher accuracy in diagnostic for the predictive
maintenance of induction motors, on-line health monitoring
system plays an important role to improve the system reliability
and availability. Among different techniques of fault detection,
work on motor current signature analysis by using only stator
current spectra has been well documented. In addition, the
recent developments in MEMS technology shows increasing
trend in integrating vibration analysis for fault diag ....etc

[:=Read Full Message Here=:]

This article is presented by:
Brüel & Kjær
2850 Nærum
Denmark

ABSTRACT
Since man began to build machines for industrial use, and especially since motors have been used to power them, problems of vibration reduction and isolation have engaged engineers. Gradually, as vibration isolation and reduction techniques have become an integral part of machine design, the need for accurate measurement and analysis of mechanical vibration has grown. This n ....etc

[:=Read Full Message Here=:]

1. ABSTRACT
Cracks present in machine parts affect their vibrational behaviour like the fundamental frequency and the resonance. This case is usual in machine parts subjected to fatigue type of loading. In this paper, the resonance response of a cracked cantilever beam has been studied based on fracture mechanics quantities like strain energy release rate, stress intensity factor and compliance. The vibration behaviour of a cantilever beam with cracks at fixed end and at the mid span has been analyzed ....etc

[:=Read Full Message Here=:]

i need the full details on the project i metioned above ....etc

[:=Read Full Message Here=:]

ABSTRACT

A laser-based contact less displacement measurement system is used for data acquisition to analyze the mechanical vibrations exhibited by vibrating structures and machines. The analysis of these vibrations requires a number of signal processing operations which include the determination of the system conditions through a classification of various observed vibration signatures and the detection of changes in the vibration signature in order to identify possible trends. This information is a ....etc

[:=Read Full Message Here=:]

hi Iam abuidrees.I need data about this project. please quickly ....etc

[:=Read Full Message Here=:]

P V Ramaiah J. and G Krishnaiah2
I Department of Mechanical Engineering, Srikalahasteeswara Institute of Technology, Andhra Pradesh, India 2Department of Mechanical Engineering, SV University College of Engineering, Andhra Pradesh, India
The manuscript was received on 15 June 2006 and was accepted after revision for publication on 30 May 2007. DOl: 1O.1243/09544062JMES411


abstract

The paper deals with modelling and design of a friction damper. This has been done in four phases. In the first p ....etc

[:=Read Full Message Here=:]

CONDITION MONITORING OF ROTARY EQUIPMENTS BY VIBRATION ANALYSIS
A Seminar Report
Submitted by
RENJITH M

MECHANICAL ENGINEERING DIVISION
SCHOOL OF ENGINEERING
COCHIN UNIVERSITY OF SCIENCE AND TECHNOLOGY

password:seminarprojects

ABSTRACT

The main function of condition monitoring is to provide the knowledge of machine condition and of its rate of change which is essential to the operation of this method. The knowledge may be obtained by selecting suitable ....etc

[:=Read Full Message Here=:]