An Experimental Study on the Vibration Characteristics of the Rotor Blade with Fiber Reinforced Plastics .

ABSTRACT:

With the current background of increasing oil price, a number of researches on development and supply ofrenewable energy are on process. Wind energy is one of them. Not only as energy itself, but also as travel resources, windenergy is ideal substitute for Korea equipped with appropriate conditions.
The purpose of this paper is that investigates the dynamic behavior characteristic of W.T.S (Wind Turbine System) an ....etc

[:=Read Full Message Here=:]

P V Ramaiah J. and G Krishnaiah2
I Department of Mechanical Engineering, Srikalahasteeswara Institute of Technology, Andhra Pradesh, India 2Department of Mechanical Engineering, SV University College of Engineering, Andhra Pradesh, India
The manuscript was received on 15 June 2006 and was accepted after revision for publication on 30 May 2007. DOl: 1O.1243/09544062JMES411


abstract

The paper deals with modelling and design of a friction damper. This has been done in four phases. In the first p ....etc

[:=Read Full Message Here=:]

hi Iam abuidrees.I need data about this project. please quickly ....etc

[:=Read Full Message Here=:]

1. ABSTRACT
Cracks present in machine parts affect their vibrational behaviour like the fundamental frequency and the resonance. This case is usual in machine parts subjected to fatigue type of loading. In this paper, the resonance response of a cracked cantilever beam has been studied based on fracture mechanics quantities like strain energy release rate, stress intensity factor and compliance. The vibration behaviour of a cantilever beam with cracks at fixed end and at the mid span has been analyzed ....etc

[:=Read Full Message Here=:]

i need the full details on the project i metioned above ....etc

[:=Read Full Message Here=:]

requirement if project on vibration analysis with time delay ....etc

[:=Read Full Message Here=:]

Vibration Transmission from Road Surface Features – Vehicle Measurement and Detection

by
Timothy J. Gordon
Zevi Bareket


1. Introduction
The purpose of the project was to investigate which sensor outputs strongly correlate with road surface features, for the purpose of reliable discrimination between different types of road feature. The intention was to reliably identify the vibration characteristics associated with rumble strips at the road edge, and discriminate these special features from ....etc

[:=Read Full Message Here=:]

ABSTRACT

A laser-based contact less displacement measurement system is used for data acquisition to analyze the mechanical vibrations exhibited by vibrating structures and machines. The analysis of these vibrations requires a number of signal processing operations which include the determination of the system conditions through a classification of various observed vibration signatures and the detection of changes in the vibration signature in order to identify possible trends. This information is a ....etc

[:=Read Full Message Here=:]

This article is presented by:
Connection Technology Center, Inc.
590 Fishers Station Drive
Victor, New York 14564Industrial Vibration Analysis
for
Predictive Maintenance and Improved Machine Reliability


Background:
Industrial vibration analysis is a measurement tool used to identify, predict, and prevent failures in rotating machinery. Implementing vibration analysis on the machines will improve the reliability of the machines and lead to be ....etc

[:=Read Full Message Here=:]

This article is presented by:
Brüel & Kjær
2850 Nærum
Denmark

ABSTRACT
Since man began to build machines for industrial use, and especially since motors have been used to power them, problems of vibration reduction and isolation have engaged engineers. Gradually, as vibration isolation and reduction techniques have become an integral part of machine design, the need for accurate measurement and analysis of mechanical vibration has grown. This n ....etc

[:=Read Full Message Here=:]