i need fulldetails about this paper ....etc

[:=Read Full Message Here=:]

Electromagnetic Interference (EMI) & Electromagnetic Compatibility (EMC)

INTRODUCTION

¢ EMI-

It consists of any unwanted conducted or radiated signals of electric origin that can cause degradation in system or equipment performance.

¢ EMC-

It is the ability of the system to function as designed without any degradation in performance due to EMI with in the operational environment


Classification of EMI

¢ INTRASYSTEM EMI-

EMI problems with in the system one is dealing with.

¢ INTERSYSTEM EMI-

EMI problem ....etc

[:=Read Full Message Here=:]

HIGH-DENSITY EMI FILTER DESIGN FOR DC-FEDMOTOR DRIVES



INTRODUCTION

Electromagnetic interference (EMI) is one of the major design challenges in motor drive systems, especially in applications where stringent standards need to be followed. EMI noise is usually defined as common-mode (CM) and differential-mode (DM) noise. CM noise is defined as the noise flows between the power circuit and the ground, while DM noise is defined as the current following the sam ....etc

[:=Read Full Message Here=:]

plz send detailed report of this ....etc

[:=Read Full Message Here=:]

detailed data of the above topic ....etc

[:=Read Full Message Here=:]

Introduction To Ham Radio Circuit Audio Filter

One of the earliest mode of radio communications is the use of Morse Code on a continuous wave carrier(CW) which is interrupted to generate a DIT and DAH in forming an alphabet. Though it looks simple, this method is often make less reliable as the surrounding man-made noise and atmospheric noise caused interference to the receiver station. This project will help to filter out the interference signal and ensure that the signal received from the Morse code station stand out.




Circuit Des ....etc

[:=Read Full Message Here=:]

1. Passive and Active Hybrid Integrated EMI Filters
2. Active-Clamping Dual Resonant Converter
3. Implementation and Analysis of an Improved Series-Loaded Resonant DC-DC Converter Operating Above Resonance for Battery Chargers
4. Performance Analysis of PV Grid-connected Power Conditioning System with UPS
5. Positive Voltage Injection Switching Inductor (P-VISI) Method for Fast Transient Response in SMPS under Loading Condition
6. High-Voltage Auxiliary Power Supply Using Series-Connected MOSFETs and Floating Self-Driving Technique
7. Usi ....etc

[:=Read Full Message Here=:]

I am looking to attend an EMIEMC course in Apr. Wanted to see if I could find a course In Boston, Ma. on Apr 18, 19 and 20th
....etc

[:=Read Full Message Here=:]

A Diesel Particulate Filter, sometimes called a DPF, is device designed to remove Diesel Particulate Matter or soot from the exhaust gas of a Diesel engine, most of which are rated at 85% efficiency, but often attaining efficiencies of over 90%. A Diesel-powered vehicle with a filter installed will emit no visible smoke from its exhaust pipe.

In addition to collecting the particulate, a method must be designed to get rid of it. Some filters are single use (disposable), while others are designed to burn off the accumulated particulate, either ....etc

[:=Read Full Message Here=:]

Am rema,want to know about an efficient common mode hybrid filter used in SMPS for my seminar work.


Abstract obtained from IEEE is After the study of electromagnetic interference (EMI)
mechanisms in switching mode power system (SMPS) and the soft
switch, this paper proposes a novel hybrid filter (HEF) to suppress
commend mode EMI in SMPS. The HEF consists of a passive filter
and an active filter. Matching network, which can reduce
impedance mismatching effects, is introduced in passive part. A
....etc

[:=Read Full Message Here=:]