The Aeronautic industry is flying high with its latest development in technologies. But the nagging feature of these aircrafts is the inadequate repair and maintenance works done manually by inspectors and this has resulted in many tragic accidents. Hence in order to help these inspectors, the Robotic Aircraft inspectors were brought in who can do almost all the jobs done by their human counter parts, at the same time maintaining a very high quality and reliability in service.

Pressurization and de-pressurization of an airplane during each ....etc

[:=Read Full Message Here=:]

ABSTRACT

This paper presents an anthropomorphic robot hand called the Gifu hand II, which has a thumb and four fingers, all the joints of which are driven by servomotors built into the fingers and the palm. The thumb has four joints with four-degrees-of-freedom (DOF); the other fingers have four joints with 3-DOF; and two axes of the joints near the palm cross orthogonally at one point, as is the case in the human hand. The Gifu hand II can be equipped with six-axes force sensor at each fingertip and a developed distributed tactile sensor w ....etc

[:=Read Full Message Here=:]

A Seminar Report
ON
Human-Oriented Interaction With An Anthropomorphic Robot

Abstract
A very important aspect in developing robots capa¬ble of human-robot interaction (HRI) is the research in natural, human-like communication, and subsequently, the development of a research platform with multiple HRI capabilities for evaluation. Besides a flexible dialog system and speech understanding, an an¬thropomorphic appearance has the potential to support intuitive usage and understanding of a robot, e.g .. h ....etc

[:=Read Full Message Here=:]

please send me power point presentation on Human-Oriented Interaction With An Anthropomorphic Robot ....etc

[:=Read Full Message Here=:]

please send me the ppt for Human-Oriented Interaction With An Anthropomorphic Robot
please send as soon as possible to [email protected] ....etc

[:=Read Full Message Here=:]

Biomechatronic Design and Control of an Anthropomorphic Artificial Hand for Prosthetic and Robotic Applications
Abstract
This paper proposes a biomechatronic approach to the design of an anthropomorphic artificial hand able to mimic the natural motion of the human fingers. The hand is conceived to be applied to prosthetics as well as to humanoid and personal robotics; hence, anthropomorphism is a fundamental requirement to be addressed both in the physical aspect and in the functional behavior. In this paper, a biomechatronic a ....etc

[:=Read Full Message Here=:]

Definition

The field of surgery is entering a time of great change, spurred on by remarkable recent advances in surgical and computer technology. Computer-controlled diagnostic instruments have been used in the operating room for years to help provide vital information through ultrasound, computer-aided tomography (CAT), and other imaging technologies. Only recently have robotic systems made their way into the operating room as dexterity-enhancing surgical assistants and surgical planners, in answer to surgeons' demands for ways to overcome ....etc

[:=Read Full Message Here=:]

Anthropomorphic Robot hand

This paper presents an anthropomorphic robot hand called the Gifu hand II, which has a thumb and four fingers, all the
joints of which are driven by servomotors built into the fingers and the palm. The thumb has four joints with four-degrees-of-freedom (DOF); the other fingers have four joints with 3-DOF; and two axes of the joints near the palm cross orthogonally at one point, as is the case in the human hand. The Gifu hand II can be equipped with
six-axes force sensor at each fingertip and a developed distrib ....etc

[:=Read Full Message Here=:]

This paper presents an anthropomorphic robot hand called the Gifu hand II, which has a thumb and four fingers, all the joints of which are driven by servomotors built into the fingers and the palm. The thumb has four joints with four-degrees-of-freedom (DOF); the other fingers have four joints with 3-DOF; and two axes of the joints near the palm cross orthogonally at one point, as is the case in the human hand ....etc

[:=Read Full Message Here=:]

INTRODUCTION
?Necessity is the mother of all inventions?.
Since the time of evolution of man, his demands and needs have compelled him to invent new and sophisticated things. The exploration process never comes to an end, everyday thousands of people work day & night to bring various utilities to us.
Man during the age of his evolution found & made new and different items which helped him in his daily activities. After stone age, copper age & bronze age, came the Industrial Age,in which various innovations started t ....etc

[:=Read Full Message Here=:]