MOSFET
Metal Oxide Semiconductor Field Effect Transistors
 Different types of FETs
 Junction FET (JFET)
 Metal-Oxide-Semiconductor FET (MOSFET)
 Metal-Semiconductor FET (MESFET)
 Different types of FETs
 Junction FET (JFET)
 Different types of FETs
 Metal-Oxide-Semiconductor FET (MOSFET)
 Different types of FETs
 Metal-Semiconductor FET (MESFET)
Basic MOSFET (n-channel)
 The gate electrode is placed on top of a very thin insulating layer.
 There are a pair of s ....etc

[:=Read Full Message Here=:]

Abstract-
In this paper, a new complementary gate driver for power metal-oxide semiconductor field-effect transistors and in sulated gate bipolar transistors is presented based on the use of a piezoelectric transformer (PT). This type of transformer has a high integration capability. Its design is based on a multilayer struc ture working in the second thickness resonance mode. A new de sign method has been used based on an analytical Mason model in order to optimize the efficiency, the available power at the trans former secon ....etc

[:=Read Full Message Here=:]

This article is presented by:
DHARAM VIR
Master of Technology in Electrical Engineering
YMCA INSTITUTE OF ENGINEERING, FARIDABAD
JULY 2009


Analytical Analysis of Double Implanted MOSFET for High Breakdown & Low Power Dissipation using Graded Profile on 6H-SiC Wafer

Objectives of Thesis:

The main objectives of this work were as follows:
Analysis of Double Implanted MOSFET on 6H SiC wafer using uniform doping profile.
Deter ....etc

[:=Read Full Message Here=:]

I am Rabindra Kumar Behera require a ppt of strained silicon mosfet. ....etc

[:=Read Full Message Here=:]

i wanna complete documentation of dis project
need a quick reply................!
....etc

[:=Read Full Message Here=:]

Logic Level MOSFET or Transistor Interfacing

Logic Level MOSFET or Transistor For Interfacing?
A logic level MOSFET may be easier. If you are using transistors to interface to the outside world you may find FETs simpler, easier and better!The traditional interfacing 'standard component' has always been the transistor. In fact I use these all the time on the bench but have you considered using a FET switch instead?There are now so called logic FETs switch are ideal for 5V operation because the threshold point is ....etc

[:=Read Full Message Here=:]

MOSFET BASED SINGLE PHASE INVERTER



1. INTRODUCTION
1.1 GOAL
“To explain theme of the project”

• INVERTER
A device that converts DC power to AC power at desired output voltage and frequency is called an INVERTER. Some industrial applications of inverters are for adjustable speed ac drives, induction heating, stand by air craft power supplies, UPS (Uninterruptible power supplies) for computers, HVDC trans ....etc

[:=Read Full Message Here=:]

I want a ppt on enhancement type MOSFET now as my presentation is tomorrow. i m not getting advantages and disadvantages of it so please help on that part.. plz help ....etc

[:=Read Full Message Here=:]

Name– Study of basic gates.
Aim – to study the working of basic gates like AND gate, OR gate and NOT gate.
Apparatus – IC 7404, IC 7408, IC 7432, circuit board, power supply +5V DC, LED, connecting wires, soldering iron, cutter etc.


Procedure –
1) You are given IC 7404, IC 7408 and IC 7432. Identify the ICs by reading their numbers and details from above given pin configurations and specifications.
2) Solder the circuit as shown in the circuit diagram.
3) Connec ....etc

[:=Read Full Message Here=:]

Active Gate Control for Current Balancing of
Parallel-Connected IGBT Modules
in Solid-State Modulators

Dominik Bortis, Student Member, IEEE, Juergen Biela, Member, IEEE, and Johann W. Kolar, Senior Member, IEEE


Abstract—

In modern pulsed power systems, often, fast solidstate
switches likeMOSFETs and insulated gate bipolar transistor
(IGBT) modules are used to generate short high power pulses. In
order to increase the pulsed power, solid-state switches have to be
connected in series or in par ....etc

[:=Read Full Message Here=:]