Active Gate Control for Current Balancing of
Parallel-Connected IGBT Modules
in Solid-State Modulators

Dominik Bortis, Student Member, IEEE, Juergen Biela, Member, IEEE, and Johann W. Kolar, Senior Member, IEEE


Abstract—

In modern pulsed power systems, often, fast solidstate
switches likeMOSFETs and insulated gate bipolar transistor
(IGBT) modules are used to generate short high power pulses. In
order to increase the pulsed power, solid-state switches have to be
connected in series or in par ....etc

[:=Read Full Message Here=:]

Connected Dominating Sets (CDSs) can serve as virtual backbones for wireless networks. A smaller virtual backbone incurs less maintenance overhead. Unfortunately, computing a minimum size CDS is NP-hard, and thus most researchers in this area concentrate on how to construct smaller CDSs. However, people neglected other important metrics of network, such as diameter and average hop distances between two communication parties. In this paper, we investigate the problem of constructing quality CDS in terms of size, diameter, and Average Backbone Pa ....etc

[:=Read Full Message Here=:]

Design and Implementation of Module Integrated Converters for
Series Connected Photovoltaic Strings.

by
Leonor L. Linares
B.S., University of Illinois at Urbana-Champaign, 2007

Introduction
The sun radiates energy onto Earth by means of light or heat. Humans have been harnessing this energy for centuries, and it is one of many types that are considered a renewable energy resource, that is, one that is naturally replenished. Photovoltaic’s (PV) is the field in which new technologies and app ....etc

[:=Read Full Message Here=:]

Multi-Input Inverter for Grid-Connected
Hybrid PV/Wind Power System
Y.-M. Chen, S.-C Hung, (2.4.C heng, and Y.-CL.i u
Power Electronics Applied Research Laboratory
(PEARL)
Department of Electrical Engineering
National Chug Cheng University
Ming-Hsiung, Chia-Yi, Taiwan



ABSTRACT

The objective of this paper is to propose a novel multi-input inverter for the grid-connected hybrid PVlwind power system in order to simplify the power system and reduce the cost. The proposed multi-input inverter ....etc

[:=Read Full Message Here=:]

hi there
i am to submit my M.Tech project report on Efficient routing in intermittently connected mobile networks: multiple copy case ,
i messed up with every thing. plz some body rescue me, as i run out of time
Giri

....etc

[:=Read Full Message Here=:]

CONTROL AND VALIDATION OF THE SERIES
CONNECTED DGFACTS
ABSTRACT
A series voltage source connected between the supplier and the consumer of the
electric network supports the voltage in that line. If the voltage injected by this
series coupled system is likely to be controlled (mainly the angle with the current
on the line), the active power which fits the load consumption can be freely
matched between the network and the series device (sDGFACTS hereinafter).
Thus, the requirements for storing energy are reduced, ....etc

[:=Read Full Message Here=:]

Operation and Control of Single Phase Micro-
Sources in a Utility Connected Grid



Ritwik Majumder, Student Member, IEEE, Arindam Ghosh, Fellow, IEEE,
Gerard Ledwich, Senior Member, IEEE and Firuz Zare, Senior Member, IEEE



ABSTRACT: This paper proposes operation and control of
converter based single phase distributed generators (DG) in a
utility connected grid. A common utility practice is to distribute
the household single-phase loads evenly between the three phases.
The voltage unbalance between ....etc

[:=Read Full Message Here=:]

Hello,
I am Smitha Bheemaiah. Doing my M.tech.

I wanted the coding part of the IEEE project Efficient routing in intermittently connected mobile networks: multiple copy case

I had worked with this project in java platform but i didnt get good results, may be due to the coding part had lot of errors. I had to be using the buffers but I have used the database which is not recommended. So, I wanted some help regarding this.

I dont know exactly the simulation part also and hence I wanted the coding part so that I can understand the pro ....etc

[:=Read Full Message Here=:]

EFFICIENT ROUTING IN INTERMITTENTLY CONNECTED MOBILE NETWORKS: THE MULTIPLE COPY CASE - NETWORKING

Intermittently connected mobile networks are wireless networks where most of the time there does not exist a complete path from the source to the destination. There are many real networks that follow this model, for example, wildlife tracking sensor networks, military networks, vehicular ad hoc networks, etc. In this context, conventional routing schemes fail, because they try to e ....etc

[:=Read Full Message Here=:]

Hello,
I am revathi. Doing my M.C.A

I wanted the coding part of the IEEE project Efficient routing in intermittently connected mobile networks: multiple copy case

I had worked with this project in java platform but i didnt get good results, may be due to the coding part had lot of errors. I had to be using the buffers but I have used the database which is not recommended. So, I wanted some help regarding this.

I dont know exactly the simulation part also and hence I wanted the coding part so that I can understand the project well an ....etc

[:=Read Full Message Here=:]