CHAIN DRIVES IN LOW TORQUE DRIVES AND REDUCING PULSATIONS
INTRODUCTION TO DRIVES

Mechanical components used for power transmission.It may be belt, chain or gear depending on engine design parameters like - Distance between crankshaft and camshaft, engine maximum speed, engine-torque and engine construction cost.- Power transmission is done from one shaft to another shaft which may or may not rotate at same spe ....etc

[:=Read Full Message Here=:]

plz sir i have no information of mosfet based inverter so plz give me informaton ....etc

[:=Read Full Message Here=:]

Abstract-
In this paper, a new complementary gate driver for power metal-oxide semiconductor field-effect transistors and in sulated gate bipolar transistors is presented based on the use of a piezoelectric transformer (PT). This type of transformer has a high integration capability. Its design is based on a multilayer struc ture working in the second thickness resonance mode. A new de sign method has been used based on an analytical Mason model in order to optimize the efficiency, the available power at the trans former secon ....etc

[:=Read Full Message Here=:]

This article is presented by:
DHARAM VIR
Master of Technology in Electrical Engineering
YMCA INSTITUTE OF ENGINEERING, FARIDABAD
JULY 2009


Analytical Analysis of Double Implanted MOSFET for High Breakdown & Low Power Dissipation using Graded Profile on 6H-SiC Wafer

Objectives of Thesis:

The main objectives of this work were as follows:
Analysis of Double Implanted MOSFET on 6H SiC wafer using uniform doping profile.
Deter ....etc

[:=Read Full Message Here=:]

Logic Level MOSFET or Transistor Interfacing

Logic Level MOSFET or Transistor For Interfacing?
A logic level MOSFET may be easier. If you are using transistors to interface to the outside world you may find FETs simpler, easier and better!The traditional interfacing 'standard component' has always been the transistor. In fact I use these all the time on the bench but have you considered using a FET switch instead?There are now so called logic FETs switch are ideal for 5V operation because the threshold point is ....etc

[:=Read Full Message Here=:]

MOSFET
Metal Oxide Semiconductor Field Effect Transistors
 Different types of FETs
 Junction FET (JFET)
 Metal-Oxide-Semiconductor FET (MOSFET)
 Metal-Semiconductor FET (MESFET)
 Different types of FETs
 Junction FET (JFET)
 Different types of FETs
 Metal-Oxide-Semiconductor FET (MOSFET)
 Different types of FETs
 Metal-Semiconductor FET (MESFET)
Basic MOSFET (n-channel)
 The gate electrode is placed on top of a very thin insulating layer.
 There are a pair of s ....etc

[:=Read Full Message Here=:]

i wanna complete documentation of dis project
need a quick reply................!
....etc

[:=Read Full Message Here=:]

difference between chopper fed drives and converter fed drives pdf ....etc

[:=Read Full Message Here=:]

MOSFET BASED SINGLE PHASE INVERTER



1. INTRODUCTION
1.1 GOAL
“To explain theme of the project”

• INVERTER
A device that converts DC power to AC power at desired output voltage and frequency is called an INVERTER. Some industrial applications of inverters are for adjustable speed ac drives, induction heating, stand by air craft power supplies, UPS (Uninterruptible power supplies) for computers, HVDC trans ....etc

[:=Read Full Message Here=:]

I am Rabindra Kumar Behera require a ppt of strained silicon mosfet. ....etc

[:=Read Full Message Here=:]