It is often desirable for structural steel members to pass through a fire wall
or common wall rather than being curtailed on each side of the wall. In such cases, the penetrating member will often be fire protected for a certain length on each side of the wall so as to minimise the possibility of fire spread through heat conduction and excessive temperature rise of the member on the unexposed side of the wall. This latter aspect is necessary to ensure that lateral restraint will continue to be provided to the top of the wall by the member on t ....etc

[:=Read Full Message Here=:]

Steel Company Modernization Project Report

This is a Project Report of one month Summer Training Program held in a Steel Company which undergoes Modernization bcoz of the old age of existing plant.
Modernization consists of building a totally new plant to increase the production to 2.5 mtpa previously which is less than 1 mtpa.
In Modernization 15 different construction company of India and 3 companies from foreign involved with 0ne consultant company to built theses:-
Blast Furnace, Coke oven Battery: 02, by product p ....etc

[:=Read Full Message Here=:]

We are interested in taking dealership plz provide details
Thanks
Lokesh Kumar
8220043689 ....etc

[:=Read Full Message Here=:]

Abstract
Modern embedded markets call for high densitycomputing ability, making it is difficult to use just onemicroprocessor to meet function requirements of highperformanceembedded systems. Multiple processors, includinggeneral-purpose embedded microprocessors, digitalsignal processors (DSPs), ASICs and FPGA hardwareaccelerators, are often used in these embedded systems.Not all processors in an embedded device have the samecharacteristics and they are asymmetric. Heterogeneousmultiprocessors bring forward difficulties in both hardwar ....etc

[:=Read Full Message Here=:]

It is often desirable for structural steel members to pass through a fire wall
or common wall rather than being curtailed on each side of the wall. In such cases, the penetrating member will often be fire protected for a certain length on each side of the wall so as to minimise the possibility of fire spread through heat conduction and excessive temperature rise of the member on the unexposed side of the wall. This latter aspect is necessary to ensure that lateral restraint will continue to be provided to the top of the wall by the member on t ....etc

[:=Read Full Message Here=:]

320 oil after using 2 years viscosity increases or decreases

technician in jsw ....etc

[:=Read Full Message Here=:]

PRESENTED BY
NITISH KUMAR SINGH


A STUDY ON THE PRICING AND SALES STRATEGY OF SECONDARY AND BY-PRODUCTS AT SAIL (BOKARO)
1.Executive Summary
This study investigates “the Pricing and Sales strategy of Secondary and by-products at Bokaro Steel Plant”. This study is done for SAIL; BSL
The present study was undertaken to see the mode of sale and pricing methods of Secondary Product of SAIL. Marketing Department is the newest genesis from the SAIL and attempts to reach their where no corpora ....etc

[:=Read Full Message Here=:]

 INTRODUCTION
Plant Road Connectivity is not only a key component of Plant Developmentby promoting access to economic and social services and thereby generating increased agricultural incomes and productive employment opportunities in India, it is also as a result, a key ingredient in ensuring sustainable poverty reduction. Notwithstanding the efforts made, over the years, atthe private sector, through differentprogrammer, about 40% of the Habitations in the industry are still notconnected by All-weather roads.






 PROJEC ....etc

[:=Read Full Message Here=:]

Construction material subjected to repetitive or cyclic loading have to be qualified for their fatigue behaviour. Generally their behaviour is considered satisfactory if they withstand two million cycle of repetitive loading without distress or failure at that required mean stress level and range stress.
The recent research in reinforcing Portland cement based material with randomly distributed fibres was spurred by pioneering research or fibre reinforced concrete (FRC) conducted in the United state in the 1960s.The addition of fibre in the co ....etc

[:=Read Full Message Here=:]

My name harpreet singh from patiala ,Punjab
I have equipment to check the compression of mild steel . please send me a experiment repot of compressive strength of mildsteel.
compressive strength of mild steel whole experiment with observation? ....etc

[:=Read Full Message Here=:]

We are interested in taking dealership plz provide details
Thanks
Lokesh Kumar
8220043689 ....etc

[:=Read Full Message Here=:]

Construction material subjected to repetitive or cyclic loading have to be qualified for their fatigue behaviour. Generally their behaviour is considered satisfactory if they withstand two million cycle of repetitive loading without distress or failure at that required mean stress level and range stress.
The recent research in reinforcing Portland cement based material with randomly distributed fibres was spurred by pioneering research or fibre reinforced concrete (FRC) conducted in the United state in the 1960s.The addition of fibre in the co ....etc

[:=Read Full Message Here=:]

PROJECT ON INTEGRATED STEEL PLANT SUBJECT - OPM TERM – II



Overview of Indian Steel Industry


The Indian steel industry has a history of 125 years and was a regulated
industry till 1991 when it was de-licensed and private players were encouraged
to manufacture steel. The sector received high priority for automatic approval
for foreign direct investment. The demand for steel was expected to race ahead
after liberalization so additional manufacturing capacities were added ....etc

[:=Read Full Message Here=:]

hey any one can suggest me new idea for my PG project in Structures.
I am insterted in Design and Analysis of Structural Steel.
Or any other current issue if you have some data releted to that, pls send ... ....etc

[:=Read Full Message Here=:]

Abstract
Modern embedded markets call for high densitycomputing ability, making it is difficult to use just onemicroprocessor to meet function requirements of highperformanceembedded systems. Multiple processors, includinggeneral-purpose embedded microprocessors, digitalsignal processors (DSPs), ASICs and FPGA hardwareaccelerators, are often used in these embedded systems.Not all processors in an embedded device have the samecharacteristics and they are asymmetric. Heterogeneousmultiprocessors bring forward difficulties in both hardwar ....etc

[:=Read Full Message Here=:]

320 oil after using 2 years viscosity increases or decreases

technician in jsw ....etc

[:=Read Full Message Here=:]

ANALYSIS OF STEEL SECTOR

SECTORS DRIVING STEEL INDUSTRY
Being a core sector, steel industry tracks the overall economic growth in the long term. Also, steel demand, being derived from other sectors like automobiles, consumer durables and infrastructure, its fortune is dependent on the growth of these user industries 

BUDGET MEASURES
Increased focus on infrastructure development. IIFCL to refinance 60 per cent of commercial ba ....etc

[:=Read Full Message Here=:]

PRESENTED BY
NITISH KUMAR SINGH


A STUDY ON THE PRICING AND SALES STRATEGY OF SECONDARY AND BY-PRODUCTS AT SAIL (BOKARO)
1.Executive Summary
This study investigates “the Pricing and Sales strategy of Secondary and by-products at Bokaro Steel Plant”. This study is done for SAIL; BSL
The present study was undertaken to see the mode of sale and pricing methods of Secondary Product of SAIL. Marketing Department is the newest genesis from the SAIL and attempts to reach their where no corpora ....etc

[:=Read Full Message Here=:]

 INTRODUCTION
Plant Road Connectivity is not only a key component of Plant Developmentby promoting access to economic and social services and thereby generating increased agricultural incomes and productive employment opportunities in India, it is also as a result, a key ingredient in ensuring sustainable poverty reduction. Notwithstanding the efforts made, over the years, atthe private sector, through differentprogrammer, about 40% of the Habitations in the industry are still notconnected by All-weather roads.






 PROJEC ....etc

[:=Read Full Message Here=:]

Abstract :

The case study project is significant since mild steel is used in structure, case hardening, gears, free cutting steels, shafting, forging etc. Mild steel plates were tested for mechanical properties like hardness, tensile strength, yield point etc. Later on the plates were joined by submerged arc welding and the mechanical properties were estimated again. Also weld ability, harden ability, tensile test etc. were conducted for the same result. ....etc

[:=Read Full Message Here=:]