Presented By:-
Harsh Jha


Cryogenic Refrigeration (Freezing )
INTRODUCTION
Cryogenics may be defined as the branch of physics which deals with the production of very low temperature and their effect on matter.
It may also be defined as the science and technology of temperatures below 120K.
The word “cryo” is derived from a Greek word “kruos” which means cold.
Cryogenics use the absolute temperature scales. These are Kelvin(SI units) or Rankine scale  (English/US units)
Methods ....etc

[:=Read Full Message Here=:]

Abstract :

The case study project is significant since mild steel is used in structure, case hardening, gears, free cutting steels, shafting, forging etc. Mild steel plates were tested for mechanical properties like hardness, tensile strength, yield point etc. Later on the plates were joined by submerged arc welding and the mechanical properties were estimated again. Also weld ability, harden ability, tensile test etc. were conducted for the same result. ....etc

[:=Read Full Message Here=:]

DESIGN AND FABRICATION OF PLATE FREEZER
PROJECT REPORT

ABSTRACT
Techniques of freezing vary for each application, The type of refrigeration used for preserving fruits cannot suit the need of the fish industries. Later it has been discovered that the number of viable vegetative microorganisms in food are usually greatly reduced by freezing if quick freezing is employed. The conventional freezers could not cope with this higher rate of freezing. By the development of the plate freezer, the challenge of quick freezing ha ....etc

[:=Read Full Message Here=:]

Please send me the details about this seminar and also send ppt file for this. ....etc

[:=Read Full Message Here=:]

Automatic Number Plate Recognition

Introduction
Automatic Number Plate Recognition or ANPR is a technology that uses pattern recognition to 'read' vehicle number plates.
work by tracking vehicles' travel time between two fixed points, and therefore calculate the average speed
In simple terms ANPR cameras 'photograph' the number plates of the vehicles that pass them. This 'photograph' is then fed in a computer system to find out details about the driver and owner of the vehicle and details about the vehicle itself
ANPR consists of c ....etc

[:=Read Full Message Here=:]

Abstract

In this paper, we discuss the design of a ball-on-plate balancing system. The conception and development of the ball-on-plate system are outlined with an emphasis on mechatronic design principles. Realization of the design is made with the simultaneous consideration towards constraints like cost, performance, functionality, extendibility, and educational merit.

The physical system consists of an acrylic plate, an actuation mechanism for the plate, a ball position sensor, instrumentation for signal processing, and real-time contr ....etc

[:=Read Full Message Here=:]

I need the complete document and ppt presentation of the above mentioned topic ....etc

[:=Read Full Message Here=:]

Definition
Automatic Number Plate Recognition or ANPR is a technology that uses pattern recognition to 'read' vehicle number plates.

work by tracking vehicles' travel time between two fixed points, and therefore calculate the average speed

In simple terms ANPR cameras 'photograph' the number plates of the vehicles that pass them. This 'photograph' is then fed in a computer system to find out details about the driver and owner of the vehicle and details about the vehicle itself

ANPR consists of cameras linked to a computer.

As ....etc

[:=Read Full Message Here=:]

Prepared by::Jithin G




FREEZING
Freezing is the processes in which all the liquids are changed into solids

This prevents the water loss

Prevents bacterial action
CONVENTIONAL SYSTEM
The meat is cooled to 4⁰C by usual refrigeration

Cutting and other operations increases the temperature

This have to be then cooled

Conventionally normal refrigeration is used but is inefficient and can produce localized cooling
CRYOGENIC FREEZING
The food enters the f ....etc

[:=Read Full Message Here=:]

FINITE ELEMENT ANALYSIS ON ANGLE PLATE
ABSTRACT
The finite element method (FEM) (sometimes referred to as finite element analysis) is a numerical technique for finding approximate solutions of partial differential equations (PDE) as well as of integral equations. The topic of the seminar includes the study of Finite Element Analysis and a case study of finite element analysis.
A double angled web connection is modeled and analyzed to predict the behavior of the angle plate using finite element analysi ....etc

[:=Read Full Message Here=:]