In metallic alloys at room temperature, atomic diffusion is typically very sluggish, and equilibrium or metastable phases do not undergo transformations. However, during plastic deformation, significant atomic mobility is possible. In addition, deformation may lead to mixing, possibly favoring the formation of nonequilibrium phases. In this talk, two examples will be presented, in which the rate of transformation to equilibrium is enhanced by mechanical deformation. In an unstable, nanocrystalline Fe50Cu50 solid solution, ball milling leads to ....etc

[:=Read Full Message Here=:]

ABSTRACT
Steering and braking are the most critical safety factors in vehicular control. Safe operation of the vehicle demands that the operator be able to maintain absolute control of the vehicleâ„¢s critical operating dynamics:
(1) Control of the direction of motion of the vehicle (steering)
(2) Control of the velocity of the vehicle, i.e. the ability to slow and fully
stop the vehicle (braking)
This presentation provides an overview of electric assisted vehicular
ste ....etc

[:=Read Full Message Here=:]

We are looking for companies that can provide us maintanence and startup for 2 anocut ecm machines. We also need a producer of ecm electrodes and possibility of training of our people.
Mail: [email protected]

....etc

[:=Read Full Message Here=:]

Assisted GPS works by providing a GPS reference network in which a series of receivers have a clear view of the sky and can operate continuously. This reference information is then made available to cellular networks such as GSM and UMTS to refine location accuracy within the sphere of location based services. This module discusses the interaction between the reference network and the Location functions within a cellular network and how these combine to offer accurate location information. ....etc

[:=Read Full Message Here=:]

i need a complete details about ECM in a automobile,its functioning,about different sensors in a vehicle and their functioning,how to identify their failure and repair it ....etc

[:=Read Full Message Here=:]

i want to make a request that i need a project report with working or non-working model on solar assisted vehicle for the handicapped.
....etc

[:=Read Full Message Here=:]

MOTION SEGMENTATION AND MEANSHIFT ASSISTED CONTOUR REFINEMENT FOR AIRBORNE VIDEO
Ratheesh K
Supriya Rao
Santhosh Kumar G
Cochin University of Science and Technology
ABSTRACT
This paper presents methods for moving object detection in airborne video surveillance. The motion segmentation in the above scenario is usually difficult because of small size of the object, motion of camera, and inconsistency in detected object shape etc. Here w ....etc

[:=Read Full Message Here=:]

ABSTRACT
Laser assisted machining (LAM) can improve the machinability of materials by locally
heating the material prior to its removal. The work presented here is a study of the laser assisted machining of Inconel 718 (NiCr19FeNb at 46 HRc) with ceramic insert. The tests have shown a reduction in the cutting force, and have highlighted the impact of laser assistance on the integrity surface (roughness, appearance, residual stress) and the tool life.
Also , It not only efficiently red ....etc

[:=Read Full Message Here=:]

Abstract
Laser assisted direct metal deposition refers to the additive layered manufacturing technology for building components from a
computer-aided design CAD. model. A motion control program, developed from the CAD model of a desired metal component,
is used to control the motion of a laser focal spot to trace all areas of the part, typically a planar layer at a time. Metal powders,
injected into the laser focal zone, are melted and then re-solidify into fully dense metal in the wake of the moving molten pool
created by the las ....etc

[:=Read Full Message Here=:]

fffffhdedsssdfgsdgdsgdgdgdgdgdgsdg ....etc

[:=Read Full Message Here=:]