Fuel Injection Pressure Effect on Performance of Direct Injection Diesel Engines Based on Experiment
Abstract
Ever increasing rate in the production of fuel injection vehicles and the significance of decreasing the pollutions in nature trigger numerous researches in optimizing the fuel injection system and recognizing the fuel behavior as well as the process of preparation of mixtures in the inlet port of fuel injection vehicles. Fuel injection pressures in diesel engine plays an important role for engine perf ....etc

[:=Read Full Message Here=:]

PLASTIC INJECTION MOLDING PROCESS



ABSTRACT:

Injection molded components are consistently designed to minimize the design and manufacturing information content of the enterprise system. The resulting designs, however, are extremely complex and frequently exhibit coupling between multiple qualities attributes. Axiomatic design principles were applied to the injection molding process to add control parameters that enable the spatial and dynamic decoupli ....etc

[:=Read Full Message Here=:]

INTRODUCTION
An Injection molding machine, also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.
Injection molding machines can fasten the molds in either a horizontal or vertical position. The majority of machines are horizontally oriented, but vertical machines are used in some niche applications such as insert molding, allowing the machine to take advantage of gravity. There are many ....etc

[:=Read Full Message Here=:]

Plastic Injection Molding



Plastic Injection Molding

It is a manufacturing technique for making parts from thermoplastic and thermoset materials
In contrast to the extrusion (which makes continuous parts of constant cross section), injection molding make discrete parts (with complex and variable cross section)
Molten plastic is injected at high pressure into a mold, which is the inverse of the desired shape.
The mold is made from metal, usually either ....etc

[:=Read Full Message Here=:]

Gasoline direct injection or GDI is a variant of fuel injection employed in modern four stroke petrol engines. The gasoline or biobutanol is injected right into the combustion chamber of each cylinder, as opposed to conventional multi point fuel injection that happens in the intake manifold.

GDI enables stratified charge (ultra lean burn) combustion for improved fuel efficiency and emission levels at low load. Further improving efficiency and high-load output-power, the engine power is governed by modulating fuel injection, like a diesel eng ....etc

[:=Read Full Message Here=:]

Blow molding


1. INTRODUCTION

Blow molding, also known as blow forming, is a manufacturing process by which hollow plastic parts are formed. It is a process used to produce hollow objects from thermoplastic.
In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and stretch blow molding.
The blow molding process begins with melting down the plastic and forming it into a parison or preform. The parison is a tube-like piece of plastic with a hole in one end ....etc

[:=Read Full Message Here=:]

ABSTRACT



Because of high requirements in power, efficiency, installation space and weight, the design of electrical machines for hybrid electrical vehicles is a particular challenge. This seminar describes a comparative study allowing the selection of the most appropriate electric-propulsion system for a parallel hybrid electric vehicle (HEV). This seminar is based on an exhaustive review of the state of the art and on an effective comparison of the performances of the four main electric propulsion systems, namely the d ....etc

[:=Read Full Message Here=:]

How to choose plastic injection molding machine

How to choose plastic injection molding machine
Typically, the important factors when choosing plastic injection molding
machine include mold, product, molding requirements and so on. Therefore,
you must collect or have the following information before making a choice:
mold dimension (width, height, thickness), weight and special design; types
and amount of the plastic (single or multiple plastic materials); dimensions
and weight of injection molding product (length, w ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

A BRIEF STUDY ON PLASTIC INJECTION MOLDING PROCESS

ABSTRACT:

Injection molded components are consistently designed to minimize the design and manufacturing information content of the enterprise system. The resulting designs, however, are extremely complex and frequently exhibit coupling between multiple qualities attributes. Axiomatic design principles were applied to the injection molding process to add control parameters that enable the spatial and dynamic decoupling of multiple quality attributes in the ....etc

[:=Read Full Message Here=:]