ABSTRACT
Steam generators are widely used in industries for several purposes like power production, processing, heating etc. In industry steam generators are the major fuel consumers. In a normal steam generator about 4% of hot water is wasted as blow down. Due to this, a large amount of heat energy is wasted. This project aims to bring a heat recovery system to prevent heat losses, so that a large savings can be made. So in ths a heat recovery system was designed to ....etc

[:=Read Full Message Here=:]

Blow molding


1. INTRODUCTION

Blow molding, also known as blow forming, is a manufacturing process by which hollow plastic parts are formed. It is a process used to produce hollow objects from thermoplastic.
In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and stretch blow molding.
The blow molding process begins with melting down the plastic and forming it into a parison or preform. The parison is a tube-like piece of plastic with a hole in one end ....etc

[:=Read Full Message Here=:]

hey
cn u send us d procedure 4 plc based automatic bottle filling? ....etc

[:=Read Full Message Here=:]

How to Construct Houses with Plastic Bottles !!



Waste bottles for construction? Yes, it is difficult to think of a bottle as a brick. But a mud-filled bottle is as strong as a brick and whatever you can do with a brick, you can
do with a bottle too..Plus it has got lots of advantages too...

Bottles,bottles everywhere!

The video shows the strength of a mud filled plastic bottle.
When you make a clay brick, the time and the energy used right from mixing the clay to baking it in the kiln and taking into ....etc

[:=Read Full Message Here=:]

How to choose plastic injection molding machine

How to choose plastic injection molding machine
Typically, the important factors when choosing plastic injection molding
machine include mold, product, molding requirements and so on. Therefore,
you must collect or have the following information before making a choice:
mold dimension (width, height, thickness), weight and special design; types
and amount of the plastic (single or multiple plastic materials); dimensions
and weight of injection molding product (length, w ....etc

[:=Read Full Message Here=:]

ADVANCES IN POWER PLANT STEAM BLOW CLEANING ANALYSES


Bechtel Power Corporation
Frederick, Maryland, USA
Paul J. Babel
Bechtel Power Corporation
Frederick, Maryland, USA
Allen T. Vieira
Bechtel Power Corporation
Fredrick, Maryland, USA

ABSTRACT
Steam blows are used prior to initial turbine powering for steam power plants to clear debris and surface scale that could potentially damage turbine blades during plant operation. Based on experience from steam blows for several dozen plants, enhancements have been m ....etc

[:=Read Full Message Here=:]

D.S.Choudhari,
Final sem students M.Tech(MED)
Prof.(Mrs.) S.D.Moghe,(Project Guide)
Department of Mechanical Engineering




Abstract

the present paper the problem is discussed on Tractor Engine Assembly & Testing. It has been seen that during the engine testing most of the time some engine fails. That means they may have a problem of seizing. In fact, the seizure of the engine is not taking place suddenly but some type of warning given by engine during testing conditions in terms of white smoke. In ....etc

[:=Read Full Message Here=:]

A BRIEF STUDY ON PLASTIC INJECTION MOLDING PROCESS

ABSTRACT:

Injection molded components are consistently designed to minimize the design and manufacturing information content of the enterprise system. The resulting designs, however, are extremely complex and frequently exhibit coupling between multiple qualities attributes. Axiomatic design principles were applied to the injection molding process to add control parameters that enable the spatial and dynamic decoupling of multiple quality attributes in the ....etc

[:=Read Full Message Here=:]

FUSE BLOWN INDICATOR WITH VOICE BASED ANNOUNCEMENT SYSTEM ....etc

[:=Read Full Message Here=:]

INTRODUCTION
An Injection molding machine, also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.
Injection molding machines can fasten the molds in either a horizontal or vertical position. The majority of machines are horizontally oriented, but vertical machines are used in some niche applications such as insert molding, allowing the machine to take advantage of gravity. There are many ....etc

[:=Read Full Message Here=:]