D.S.Choudhari,
Final sem students M.Tech(MED)
Prof.(Mrs.) S.D.Moghe,(Project Guide)
Department of Mechanical Engineering




Abstract

the present paper the problem is discussed on Tractor Engine Assembly & Testing. It has been seen that during the engine testing most of the time some engine fails. That means they may have a problem of seizing. In fact, the seizure of the engine is not taking place suddenly but some type of warning given by engine during testing conditions in terms of white smoke. In ....etc

[:=Read Full Message Here=:]

Blow molding


1. INTRODUCTION

Blow molding, also known as blow forming, is a manufacturing process by which hollow plastic parts are formed. It is a process used to produce hollow objects from thermoplastic.
In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and stretch blow molding.
The blow molding process begins with melting down the plastic and forming it into a parison or preform. The parison is a tube-like piece of plastic with a hole in one end ....etc

[:=Read Full Message Here=:]

Describe the thermal jet engine and the chemical rocket engine stating clearly the difference between them ....etc

[:=Read Full Message Here=:]

ABSTRACT
Steam generators are widely used in industries for several purposes like power production, processing, heating etc. In industry steam generators are the major fuel consumers. In a normal steam generator about 4% of hot water is wasted as blow down. Due to this, a large amount of heat energy is wasted. This project aims to bring a heat recovery system to prevent heat losses, so that a large savings can be made. So in ths a heat recovery system was designed to ....etc

[:=Read Full Message Here=:]

which one is more better in terms of power consumption,long life and better fuel efficiency ? ....etc

[:=Read Full Message Here=:]

ADVANCES IN POWER PLANT STEAM BLOW CLEANING ANALYSES


Bechtel Power Corporation
Frederick, Maryland, USA
Paul J. Babel
Bechtel Power Corporation
Frederick, Maryland, USA
Allen T. Vieira
Bechtel Power Corporation
Fredrick, Maryland, USA

ABSTRACT
Steam blows are used prior to initial turbine powering for steam power plants to clear debris and surface scale that could potentially damage turbine blades during plant operation. Based on experience from steam blows for several dozen plants, enhancements have been m ....etc

[:=Read Full Message Here=:]

MPFI ( multi point fuel injection system ) Vs CRDI(Common rail direct injection system)

(Actually an open office format. Use open office to open it)
MPFI : mean multi point fuel injection system ie. in petrol engine for gaining more uniform Air Fuel blending fuel is injected at various point in the path of air. this tech is used in light weight car running on petrol. there is also milage improvement due to this.

but in case of DTSI(digital twin spark ignition) : the
engine cylinder consist of two no of spark plu ....etc

[:=Read Full Message Here=:]

The stratified charge engine is a type of internal-combustion engine, similar in some ways to the Diesel cycle, but running on normal gasoline. The name refers to the layering of fuel/air mixture, the charge inside the cylinder.

In a traditional Otto cycle engine the fuel and air are mixed outside the cylinder and are drawn into it during the intake stroke. The air/fuel ratio is kept very close to stoichiometric, which is defined as the exact amount of air necessary for a complete combustion of the fuel. This mixture is easily ignited and bu ....etc

[:=Read Full Message Here=:]

requirement
....etc

[:=Read Full Message Here=:]

FUSE BLOWN INDICATOR WITH VOICE BASED ANNOUNCEMENT SYSTEM ....etc

[:=Read Full Message Here=:]