With the day to day improvement in the field of medicine the urban society is enjoying a healthy life, but for the people of rural and remote areas even the basic health care is not sufficiently available. For the rural masses to enjoy the breakthroughs in the field of medicine, â„¢Telemedicineâ„¢ can be used. The present form of telemedicine does not suit the Indian scenario due to the described factors. To make telemedicine suitable for Indian conditions we design a low cost, efficient prototype system making use of fixed Wireless In ....etc

[:=Read Full Message Here=:]

A BRIEF STUDY ON PLASTIC INJECTION MOLDING PROCESS

ABSTRACT:

Injection molded components are consistently designed to minimize the design and manufacturing information content of the enterprise system. The resulting designs, however, are extremely complex and frequently exhibit coupling between multiple qualities attributes. Axiomatic design principles were applied to the injection molding process to add control parameters that enable the spatial and dynamic decoupling of multiple quality attributes in the ....etc

[:=Read Full Message Here=:]

Fuel Injection Pressure Effect on Performance of Direct Injection Diesel Engines Based on Experiment
Abstract
Ever increasing rate in the production of fuel injection vehicles and the significance of decreasing the pollutions in nature trigger numerous researches in optimizing the fuel injection system and recognizing the fuel behavior as well as the process of preparation of mixtures in the inlet port of fuel injection vehicles. Fuel injection pressures in diesel engine plays an important role for engine perf ....etc

[:=Read Full Message Here=:]

With the day to day improvement in the field of medicine the urban society is enjoying a healthy life, but for the people of rural and remote areas even the basic health care is not sufficiently available. For the rural masses to enjoy the breakthroughs in the field of medicine, 'Telemedicine' can be used. The present form of telemedicine does not suit the Indian scenario due to the described factors. To make telemedicine suitable for Indian conditions we design a low cost, efficient prototype system making use of fixed Wireless Internet. In ou ....etc

[:=Read Full Message Here=:]

Plastic Injection Molding



Plastic Injection Molding

It is a manufacturing technique for making parts from thermoplastic and thermoset materials
In contrast to the extrusion (which makes continuous parts of constant cross section), injection molding make discrete parts (with complex and variable cross section)
Molten plastic is injected at high pressure into a mold, which is the inverse of the desired shape.
The mold is made from metal, usually either ....etc

[:=Read Full Message Here=:]

We propose a prototype pedestrian-to-vehicle communication system which uses a cellular phone and wireless communication to improve the safety of pedestrians. One of the effectual measures against pedestrian-to-vehicle accidents is to make each of pedestrians and drivers find the others and recognize the risk from out of sight and with time to spare for avoidance of accidents. A pedestrian-to-vehicle communication system was developed by using a cellular phone and a car navigation system equipped with GPS and wireless communication function. We ....etc

[:=Read Full Message Here=:]

PLASTIC INJECTION MOLDING PROCESS



ABSTRACT:

Injection molded components are consistently designed to minimize the design and manufacturing information content of the enterprise system. The resulting designs, however, are extremely complex and frequently exhibit coupling between multiple qualities attributes. Axiomatic design principles were applied to the injection molding process to add control parameters that enable the spatial and dynamic decoupli ....etc

[:=Read Full Message Here=:]

INTRODUCTION
An Injection molding machine, also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.
Injection molding machines can fasten the molds in either a horizontal or vertical position. The majority of machines are horizontally oriented, but vertical machines are used in some niche applications such as insert molding, allowing the machine to take advantage of gravity. There are many ....etc

[:=Read Full Message Here=:]

Blow molding


1. INTRODUCTION

Blow molding, also known as blow forming, is a manufacturing process by which hollow plastic parts are formed. It is a process used to produce hollow objects from thermoplastic.
In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and stretch blow molding.
The blow molding process begins with melting down the plastic and forming it into a parison or preform. The parison is a tube-like piece of plastic with a hole in one end ....etc

[:=Read Full Message Here=:]

How to choose plastic injection molding machine

How to choose plastic injection molding machine
Typically, the important factors when choosing plastic injection molding
machine include mold, product, molding requirements and so on. Therefore,
you must collect or have the following information before making a choice:
mold dimension (width, height, thickness), weight and special design; types
and amount of the plastic (single or multiple plastic materials); dimensions
and weight of injection molding product (length, w ....etc

[:=Read Full Message Here=:]