INTRODUCTION
An Injection molding machine, also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.
Injection molding machines can fasten the molds in either a horizontal or vertical position. The majority of machines are horizontally oriented, but vertical machines are used in some niche applications such as insert molding, allowing the machine to take advantage of gravity. There are many ....etc

[:=Read Full Message Here=:]

ABSTRACT
Study of new and cost effective finishing processes has alwaysbeen an area of keen interest to overcome the difficulties ofexisting finishing process. Magnetic Abrasive Finishing(MAF) is a process in which a mixture of non-ferromagneticabrasives and ferromagnetic iron particles is used to dofinishing operation with the aid of magnetic force. The ironparticles in the mixture are magnetically energized using amagnetic field. The iron particles form a lightly rigid matrixin which the abrasives are trapped. This ....etc

[:=Read Full Message Here=:]

PLASTIC INJECTION MOLDING PROCESS



ABSTRACT:

Injection molded components are consistently designed to minimize the design and manufacturing information content of the enterprise system. The resulting designs, however, are extremely complex and frequently exhibit coupling between multiple qualities attributes. Axiomatic design principles were applied to the injection molding process to add control parameters that enable the spatial and dynamic decoupli ....etc

[:=Read Full Message Here=:]

A BRIEF STUDY ON PLASTIC INJECTION MOLDING PROCESS

ABSTRACT:

Injection molded components are consistently designed to minimize the design and manufacturing information content of the enterprise system. The resulting designs, however, are extremely complex and frequently exhibit coupling between multiple qualities attributes. Axiomatic design principles were applied to the injection molding process to add control parameters that enable the spatial and dynamic decoupling of multiple quality attributes in the ....etc

[:=Read Full Message Here=:]

presented by:
A.Thillaivanan
P.Asokan
R.Saravanan
K.N.Srinivasan


CUTTING PARAMETERS OPTIMIZATION FOR THE WIRE EDM PROCESS USING CONTINUOUS ANTS COLONY ALGORITHM (CACO)
ABSTRACT:
Optimization of operating parameters is an important step in machining, particularly for operating unconventional machining procedure like Wire EDM .The economy of machining mainly depends on the machining parameters. Optimization of machining parameters is an important step and has been dealt by many researchers. In this paper ....etc

[:=Read Full Message Here=:]

Plastic Injection Molding



Plastic Injection Molding

It is a manufacturing technique for making parts from thermoplastic and thermoset materials
In contrast to the extrusion (which makes continuous parts of constant cross section), injection molding make discrete parts (with complex and variable cross section)
Molten plastic is injected at high pressure into a mold, which is the inverse of the desired shape.
The mold is made from metal, usually either ....etc

[:=Read Full Message Here=:]

Abrasive Jet Machine

Introduction
Abrasive jet machining (AJM) is a non-traditional machining
process that can machine material without generating heat and
shock.
Abrasive jet machining (AJM) is commonly used for Cutting,
Cleaning, Drilling and Etching operation

Mechanism of AJM

Fine particles are accelerated in
gas stream .


The particles are directed towards
the focus of machining.

As the particle impacts the surface,
....etc

[:=Read Full Message Here=:]

PROJECT GUIDE :
Dr.K.RAMANATHAN

Presented by:
K.KARTHIKEYAN




Abstract

Titanium nitride (TiN) is an extremely hard ceramic material, often used as a coating on titanium alloys, steel, carbide, and aluminium components to improve the substrate's surface properties.


Applied as a thin coating, TiN is used to harden and protect cutting and sliding surfaces, for decorative purposes (due to its gold appearance), and as a non-toxic exterior for medical implants.

TiN coating is for edge retention and corrosion ....etc

[:=Read Full Message Here=:]

Blow molding


1. INTRODUCTION

Blow molding, also known as blow forming, is a manufacturing process by which hollow plastic parts are formed. It is a process used to produce hollow objects from thermoplastic.
In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and stretch blow molding.
The blow molding process begins with melting down the plastic and forming it into a parison or preform. The parison is a tube-like piece of plastic with a hole in one end ....etc

[:=Read Full Message Here=:]

How to choose plastic injection molding machine

How to choose plastic injection molding machine
Typically, the important factors when choosing plastic injection molding
machine include mold, product, molding requirements and so on. Therefore,
you must collect or have the following information before making a choice:
mold dimension (width, height, thickness), weight and special design; types
and amount of the plastic (single or multiple plastic materials); dimensions
and weight of injection molding product (length, w ....etc

[:=Read Full Message Here=:]