WE WANT PAPER PRESENTATION ON OPERATION AND CONTROL OF SINGLE PHASE MICRO SOURCES IN A UTILITY CONNECTED GRID ....etc

[:=Read Full Message Here=:]

This seminar presents the manufacturing processes of thermoplastic structures including piezoceramic patches (PZT). The objective of the study reported here was to find a trade-off between the manufacturing conditions and the thermal endurance of the PZT patches. We studied the influence of high temperatures on the PZT efficiency during manufacturing. Two processes were considered: injection molding and thermoforming. The studied object consists of a polypropylene plate containing a PZT patch integrated at different positions. On the one hand, ....etc

[:=Read Full Message Here=:]

Determination of Optimum Process Parameters during turning of AISI 304



Introduction and literature survey

In machining process, Surface finish is one of the most significant technical requirements of the customer. A reasonably good surface finish is desired to improve the tribological properties, fatigue strength, corrosion resistance and aesthetic appeal of the product. Nowadays, manufacturing industries specially concerned to dimensional accuracy and surface finish. In order to obtain optimal cutting pa ....etc

[:=Read Full Message Here=:]

can u tell me about islanding in detail? ....etc

[:=Read Full Message Here=:]

RISK ANALYSIS OF ISLANDING OF PHOTOVOLTAIC POWER SYSTEMS PROTECTION


INTRODUCTION

Under stable steady state operation, all synchronous machines in the grid operate at synchronous speed. Frequency is the measure of load/generation balance. Prevailing frequency of synchronous generators and the Grid depends on matching between (Total MW Load on the Grid plus Losses) and the (Total MW Generation) at that time. Excess Load causes frequency drop. Excess Gene ....etc

[:=Read Full Message Here=:]

Operation and Control of Single Phase Micro-
Sources in a Utility Connected Grid



Ritwik Majumder, Student Member, IEEE, Arindam Ghosh, Fellow, IEEE,
Gerard Ledwich, Senior Member, IEEE and Firuz Zare, Senior Member, IEEE



ABSTRACT: This paper proposes operation and control of
converter based single phase distributed generators (DG) in a
utility connected grid. A common utility practice is to distribute
the household single-phase loads evenly between the three phases.
The voltage unbalance between ....etc

[:=Read Full Message Here=:]

ABSTRACT
Study of new and cost effective finishing processes has alwaysbeen an area of keen interest to overcome the difficulties ofexisting finishing process. Magnetic Abrasive Finishing(MAF) is a process in which a mixture of non-ferromagneticabrasives and ferromagnetic iron particles is used to dofinishing operation with the aid of magnetic force. The ironparticles in the mixture are magnetically energized using amagnetic field. The iron particles form a lightly rigid matrixin which the abrasives are trapped. This ....etc

[:=Read Full Message Here=:]

Introduction:
In this 21st century we required a multi functional system to operate on different platforms, which can access data easily, the main purpose of a Heterogeneous server is to establish a Heterogeneous network that can connect computers and other devices with different operating systems and/or protocols. For example, local area networks (LANs) that connect Microsoft Windows and Linux based personal computers with Apple Macintosh computers are heterogeneous. The word heterogeneous network is also used in ....etc

[:=Read Full Message Here=:]

hi, i am looking for matlab code for optimal islanding mode in radial distribution system(preferably IEEE 33 bus) ....etc

[:=Read Full Message Here=:]

WE WANT PAPER PRESENTATION ON POWER QUALITY IMPROVEMENT USING UPQC FOR WIND FARM GENERATION SYSTEM ....etc

[:=Read Full Message Here=:]