Abstract
Organic thin-film transistors OTFTs have received considerable attention recently because they can be fabricated at reduced temperature and potentially reduced cost compared to hydrogenated amorphous silicon thin-film transistors. Low fabrication temperature allows a wide range of substrate possibilities and makes OTFTs an attractive technology for many low-cost electronics applications, particularly those that require or may benefit from flexible polymeric substrates such as rf identification tags, smart cards ....etc

[:=Read Full Message Here=:]

ABSTRACT

Low-k dielectrics are the very latest path breaking development in the field of Integrated Electronics. It is well on its way replacing the Al / SiO2 interconnects with the help of copper in CMOS fabrication of IC Chips. The CMOS technology has an in-built coupling capacitance which increases the time delay, thereby reducing associated processing speeds. This was compensated by reducing the thickness of the Al / SiO2 interconnects. There is a limit to the reduction in t ....etc

[:=Read Full Message Here=:]

thermally comfortable passive house for tropical uplands good ....etc

[:=Read Full Message Here=:]

DESIGN AND DEVELOPMENT OF HIGH-FREQUENCY THERMOACOUSTIC ENGINES FOR THERMAL MANAGEMENT IN MICROELECTRONICS
SEMINAR REPORT
Submitted by
VIBIN KOSHY THOMAS
S7-ME
Department Of Mechanical Engineering
College of Engineering, Thiruvananthapuram – 16
OCTOBER 2010





ABSTRACT

Thermoacoustic heat engines provide a practical solution to the problem of heat management in microcircuits where they can be used to pump heat or produce spot cooling of specific circuit elements. There are ....etc

[:=Read Full Message Here=:]

i need a detailed report about six stroke engines ....etc

[:=Read Full Message Here=:]

Definition

The fiber/matrix adhesion is most likely to control the overall mechanical behavior of fiber-reinforced composites. An interfacial reaction may result in various morphological modifications to polymer matrix microstructure in proximity to the fiber surface. The interactions between fiber and polymer matrix during thermal conditioning and thermal shock are important phenomena.

Thermal stresses were built-up in glass fiber reinforced epoxy composites by up-thermal shock cycles (negative to positive temperature exposure) for diff ....etc

[:=Read Full Message Here=:]

Pixie dust

Pixie dust is the informal name that IBM is using for its antiferromagnetically-coupled (AFC) media technology, which can increase the data capacity of hard drives to up to four times the density possible with current drives. AFC overcomes limits of current hard drives caused by a phenomenon called the superparamagnet effect.
AFC allows more data to be packed onto a disk. The pixie dust used is a 3- atom thick magnetic coating composed of the element ruthenium sandwiched between two magnetic layers. The technology is expected to ....etc

[:=Read Full Message Here=:]

The Hy-Wire Car

Introduction
Cars are immensely complicated machines, but when you get down to it, they do an incredibly simple job. Most of the complex stuff in a car is dedicated to turning wheels, which grip the road to pull the car body and passengers along. The steering system tilts the wheels side to side to turn the car, and brake and acceleration systems control the speed of the wheels.

Given that the overall function of a car is so basic (it just needs to provide rotary motion to whe ....etc

[:=Read Full Message Here=:]

1 .INTRODUCTION

In the 21st century, the nanometer will very likely play a role similar to the one played by the micrometer in the 20th century The nanometer scale will presumably pervade the field of data storage. In magnetic storage today, there is no clear-cut way to achieve the nanometer scale in all three dimensions. The basis for storage in the 21st century might still be magnetism. Within a few years, however, magnetic storage technology will arrive at a stage of its exciting and successful evolution at which fund ....etc

[:=Read Full Message Here=:]

Thermally comfortable passive house for tropical uplands ....etc

[:=Read Full Message Here=:]

Thermal shock on interfacial adhesion of thermally conditioned Glass fiber/epoxy


The fiber/matrix adhesion is most likely to control the overall mechanical behavior of fiber-reinforced composites. An interfacial reaction may result in various morphological modifications to polymer matrix microstructure in proximity to the fiber surface. The interactions between fiber and polymer matrix during thermal conditioning and thermal shock are important phenomena.

Thermal stresses were built-up in glass ....etc

[:=Read Full Message Here=:]

A seminar topic on Thermal shock on interfacial adhesion of thermally conditioned ....etc

[:=Read Full Message Here=:]

Hi am lavanya i would like to get details on thermally comfortable passive house for tropical uplands pdf ....etc

[:=Read Full Message Here=:]

The Hy-Wire Car

Introduction
Cars are immensely complicated machines, but when you get down to it, they do an incredibly simple job. Most of the complex stuff in a car is dedicated to turning wheels, which grip the road to pull the car body and passengers along. The steering system tilts the wheels side to side to turn the car, and brake and acceleration systems control the speed of the wheels.

Given that the overall function of a car is so basic (it just needs to provide rotary motion to whe ....etc

[:=Read Full Message Here=:]

ABSTRACT
In the future, the current method of magnetically storing data may reach its limit of maximum achievable density. Hence we need a data storage technology which has high storage capacity and is small in size. The solution is Thermomechanical data storage. Thermomechanical Data Storage is a data storage scheme in which nanometer sized pits on a plastic disc represent digital data. This data storage concept combines ultrahigh density, terabit capacity, small form factor and high data rates. By using this concept, we w ....etc

[:=Read Full Message Here=:]

Six-Stroke, High-Efficiency Quasiturbine Concept Engine
With Distinct, Thermally-Insulated
Compression and Expansion Components

George Marchetti and Gilles Saint-Hilaire


Need to increase engine thermal efficiency. This paper presents a Quasiturbine thermal management strategy in the development of high-efficiency engines for the 21st century. In the concept engine, high-octane fuels are preferred because higher engine efficiencies can be attained with these fuels. Higher efficiencies mean less fuel consumption a ....etc

[:=Read Full Message Here=:]

SHAPE MEMORY ALLOYS
Introduction
Shape memory alloys (SMA's) are metals, which exhibit two very unique properties, pseudo-elasticity, and the shape memory effect. Arne Olander first observed these unusual properties in 1938 (Oksuta and Wayman 1998), but not until the 1960's were any serious research advances made in the field of shape memory alloys. The most effective and widely used alloys include NiTi (Nickel - Titanium), CuZnAl, and CuAlNi.
The two unique properties described above are made possi ....etc

[:=Read Full Message Here=:]