ABSTRACT
Given the rapidly increasing data volumes that are downloaded onto mobile devices such as cell phones and PDAs, there is a growing demand for suitable storage media with more and more capacity. At CeBIT, IBM for the first time shows the prototype of the MEMS- Micro Electrical Mechanical System- assembly of a nanomechanical storage system known internally as the millipede project. Using revolutionary nanotechnology, scientists at the IBM Zurich Research Laboratory, Switzerland, have made it to the millionths o ....etc

[:=Read Full Message Here=:]

Contract farming

In India agriculture is still based largely on small family holdings, seasonal production and traditional cultivation and management practices. most small farmers are independent producers, who sell their produce individually and have little bargaining power with input suppliers and produce markets. Agricultural marketing is similarly underdeveloped, with overlapping marketing channels, inadequate infrastructure and price information, a lack of postharvest management expertise and poor packaging of produce.But now ....etc

[:=Read Full Message Here=:]

Anandu pv
B.tech mechanical engineering ....etc

[:=Read Full Message Here=:]

Abstract:
The atomic force microscope (AFM) or scanning force microscope (SFM) is a very high-resolution type of scanning probe microscopy, with demonstrated resolution of fractions of ananometer, more than 1000 times better than the optical diffraction limit. The precursor to the AFM, the scanning tunneling microscope, was developed by Gerd Binnig and Heinrich Rohrer in the early 1980s, a development that earned them the Nobel Prize for Physics in 1986. Binnig,Quate and Gerber invented the first AFM in 1986. The AFM is one of the forem ....etc

[:=Read Full Message Here=:]

The recent increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of newer machining techniques. Conventional machining or finishing methods are not readily applicable to the new materials like hastalloy, nitralloy, waspalloy, nimonics, carbides, ceramics etc.


Conventional machining processes when applied to these newer materials:
1. Are uneconomical,
2. Produce poor degree of surface finish and accuracy,
3. Produce some stress,
4. Highly insufficient.

Newer machin ....etc

[:=Read Full Message Here=:]

Integrated SPM probes with NEMS technology
(NANOTECHNOLOGY)
Integrated SPM probes with NEMS technology
Abstract
Two kinds of integrated scanning probe microscope (SPM) probes are developed. The first kind is AFM probes realized with a novel masked“maskless combined etching process. Both the nano-tips for scanning and the bending cantilevers are simultaneously formed with the masked“maskless combined anisotropic etching technique. The simultaneous formation method effectively avoids damage to the previously ....etc

[:=Read Full Message Here=:]

Introduction
The millipede high-density data storage system is based on micromechanical (MEMS*) components borrowed from atomic force microscopy (AFM). Tiny depressions created with an AFM tip in a polymer medium represent stored data bits that can then be read back by the same tip. Data written in this way can also be erased using the same tip, and the polymer medium can be reused thousands of times. This thermomechanical storage technique is capable of achieving data densities exceeding 1 Tb/in², well beyond the expected limits o ....etc

[:=Read Full Message Here=:]

1 .INTRODUCTION

In the 21st century, the nanometer will very likely play a role similar to the one played by the micrometer in the 20th century The nanometer scale will presumably pervade the field of data storage. In magnetic storage today, there is no clear-cut way to achieve the nanometer scale in all three dimensions. The basis for storage in the 21st century might still be magnetism. Within a few years, however, magnetic storage technology will arrive at a stage of its exciting and successful evolution at which fund ....etc

[:=Read Full Message Here=:]

All microscopes which provide images of atoms on or in the surface of any body is called atomic force microscope or the AFM, while all those microscopes which uses the principle of the atomic force microscopes are called as scanning probe microscope or the SPMâ„¢S.
These scanning probe microscopes work by measuring a local property such as height ,optical absorbtion magnetism etc ,by scanning over the sample by measuring the above property and providing the image on the television,with the probe or ....etc

[:=Read Full Message Here=:]

INTRODUCTION
The national commission on urbanization (NCU) has noted that “urban transportationis the single most important component instrumental in shaping urban development & urbanliving” In the next millennium, almost all the metropolitan cities are a serious threats ofenvironmental pollution, traffic congestion, parking problem, population burden etc.Massrapid transit systems (MRTS) are rail based urban transit systems and the only mode of
public transportation capable of carrying large number of people in ....etc

[:=Read Full Message Here=:]

Contract farming

In India agriculture is still based largely on small family holdings, seasonal production and traditional cultivation and management practices. most small farmers are independent producers, who sell their produce individually and have little bargaining power with input suppliers and produce markets. Agricultural marketing is similarly underdeveloped, with overlapping marketing channels, inadequate infrastructure and price information, a lack of postharvest management expertise and poor packaging of produce.But now ....etc

[:=Read Full Message Here=:]

Background
• Magnetic and optical recording technologies are used for nonvolatile data storage. These technologies are reaching limit of data recording density of 500 Gb/in2 and 100 Gb/in2, respectively.
• Battle: Flash vs. hard drives
....etc

[:=Read Full Message Here=:]

INTRODUCTION

Invented by Alois Senefelder in Germany in 1798
Fundamentally new printing technology
Mechanical Plano graphic process in which the printing and non-printing areas of the plate are all at the same level

Dip-Pen Nanolithography

DPN is a unique modification of atomic force microscope (AFM) instrumentation.
High-resolution patterning capabilities for a number of molecular and biomolecular Ëœinksâ„¢ on a variety of substrate types such as metals, semiconductors, and monolayer fu ....etc

[:=Read Full Message Here=:]

contract and cash flows in construction



Introduction
Construction Industry is one of the most booming industries in the whole world. This industry is mainly an urban based one which is concerned with preparation as well as construction of real estate properties. The repairing of any existing building or making certain alterations in the same also comes under Construction Industry. This industry can be categorized into three basic categories namely:-
....etc

[:=Read Full Message Here=:]

ABSTRACT
In the future, the current method of magnetically storing data may reach its limit of maximum achievable density. Hence we need a data storage technology which has high storage capacity and is small in size. The solution is Thermomechanical data storage. Thermomechanical Data Storage is a data storage scheme in which nanometer sized pits on a plastic disc represent digital data. This data storage concept combines ultrahigh density, terabit capacity, small form factor and high data rates. By using this concept, we w ....etc

[:=Read Full Message Here=:]

ABSTRACT
Given the rapidly increasing data volumes that are downloaded onto mobile devices such as cell phones and PDAs, there is a growing demand for suitable storage media with more and more capacity. At CeBIT, IBM for the first time shows the prototype of the MEMS- Micro Electrical Mechanical System- assembly of a nanomechanical storage system known internally as the millipede project. Using revolutionary nanotechnology, scientists at the IBM Zurich Research Laboratory, Switzerland, have made it to the millionths o ....etc

[:=Read Full Message Here=:]