PREPARATION,CHARACTERISATION ENGINE PERFORMANCE AND EMISSION CHARACTERISTICS OF COCONUT-OIL BASED HYBRID FUELS

SEMINAR REPORT
Submitted by
KIRAN S
S7 M2
College Of Engineering, Trivandrum
2007-11 batch



Hi guys, If you like the report, don't forget to thank the author [email protected]

ABSTRACT

The double-pass solar collector with porous media in the lower channel provides a higher outlet temperature compared to the conventional single-pass collector. Ther ....etc

[:=Read Full Message Here=:]

sir please share me some HR and Technical questions for Rain madras company mysuru. ....etc

[:=Read Full Message Here=:]

Studies on Aluminum-Fly-Ash Composite Produced by Impeller Mixing

A THESIS SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF
Master of Technology
In Metallurgical & Materials Engineering
Submitted By
Shuvendu Tripathy Roll No.207MM103
Under the guidance of Prof.S.Sarkar
Department of National Metallurgical & Materials Institute of Technology Rourkela 2009
National Institute of Technology Rourkela


ABSTRACT
Metal matrix composites (MMCs) constitute an important class of design and w ....etc

[:=Read Full Message Here=:]

ABSTRACT

Low-k dielectrics are the very latest path breaking development in the field of Integrated Electronics. It is well on its way replacing the Al / SiO2 interconnects with the help of copper in CMOS fabrication of IC Chips. The CMOS technology has an in-built coupling capacitance which increases the time delay, thereby reducing associated processing speeds. This was compensated by reducing the thickness of the Al / SiO2 interconnects. There is a limit to the reduction in t ....etc

[:=Read Full Message Here=:]

i want to know more about self curing concrete for my thesis work. I request to give sufficient details as soon as possible. ....etc

[:=Read Full Message Here=:]

i want a full and detailed report in robotic arm with gripper with procedures and diagrams ....etc

[:=Read Full Message Here=:]

Toward Functionally GradedCellular Microstructures

Presented by:
Balasubramaniam
M.Tech-Machine Design (1st Year)
Karunya Institute of Technology.

Guided by:
Mr. Prancis D’Souza
Lecturer,
Mechanical Department,
IIT Kanpur.



SYNOPSIS

Why towards this topic?
The design of multifunctional materials offers great potential for numerous applications in areas ranging from biomaterial science to structural engineering.

- What are functionally graded cellular microst ....etc

[:=Read Full Message Here=:]

ABSTRACT

The concept of insulating cooled heat engine components such as gas turbine blades and diesel engine valves from hot working fluids with a ceramic thermal barrier coating is by no means new. A practical system, however, has only been identified in the past few years. Thermal barrier coating (TBC) are applied to metallic components to reduce metal temperature, reduce life cycle cost, increase the environmental resistance and in some cases reduce noxious exhaust emissions. The selection of TBC involves many consider ....etc

[:=Read Full Message Here=:]

Presented by
V.Venkatesh


INTRODUCION
 A robot is a machine designed to execute one or more tasks repeatedly, with speed and precision. There are as many different types of robots as there are tasks for them to perform. The field of robotics may be more practically defined as the study, design and use of Robot systems for manufacturing
 Robotics is the science and technology of robots, their design, manufacture, and application. Robotics requires a working knowledge of electro ....etc

[:=Read Full Message Here=:]

Porous Metal Design Guidebook
Introduction and Definitions
This article provides general information about porous sintered metals made from metal powders, describes methods of manufacture and includes information concerning design data and applications. Porous metal materials have engineered, inter-connected porosity that are fabricated from metal powder particles using powder metallurgy (PM) techniques. The following terms are helpful for understanding industry definitions and related standards: P ....etc

[:=Read Full Message Here=:]