Abstract
Two major factors that limit the throughput inmulti-hop wireless networks are the unreliability of wirelesstransmissions and co-channel interference. One promising techniquethat combats lossy wireless transmissions is opportunisticrouting (OR). OR involves multiple forwarding candidates torelay packets by taking advantage of the broadcast nature andspacial diversity of the wireless medium. Furthermore, recentadvances in multi-radio multi-channel transmission technologyallows more concurrent transmissions in the network, and sh ....etc

[:=Read Full Message Here=:]

I require the cylinder lubrication
Regards
Vijay Maske ....etc

[:=Read Full Message Here=:]

ABSTRACT
Metal cutting fluids changes the performance of machining operations because of their lubrication, cooling, and chip flushing functions. Typically, in the machining of hardened steel materials, no cutting fluid is applied in the interest of low cutting forces and low environmental impacts. Minimum quantity lubrication (MQL) presents itself as a viable alternative for hard machining with respect to tool wear, heat dissertation, and machined surface quality. This study compares the mechanical performance of mini ....etc

[:=Read Full Message Here=:]

Respected sir,
I want to do the project on Minimum Quantity Lubrication for that purpose i required referances (litreture)for the synopsis.Pls consider my needyness & help to me.

Thanks & Regards
Pravin Patil
[email protected]
for project i want data on minimum quantity lubrication,Pls send for needy. ....etc

[:=Read Full Message Here=:]

in this project PLC is used to control the flow of lubricating oil at specified level , this can be done to on bearing, journals and other engine part by installing a transducer near to it , automatically controlling the lubrication of a bearing can be performed either by a stationary installed vibration servo or by measuring the real amount of grease being fed into the bearing . The figure shows a flow transducer unit installed directly in to the grease point. The unit closes/opens a switch which can be used to monitor the real grease flow. ....etc

[:=Read Full Message Here=:]

sir,please sent me ppt of oil mist lubrication ....etc

[:=Read Full Message Here=:]

respected sir,
I am doing project on Minimum Quantity Lubrication,so for that i want seminar report(referances),so kindly help me.

Thank You
Pravin
([email protected]) ....etc

[:=Read Full Message Here=:]

DEVELOPMENT OF ELECTROSTATIC SOLID LUBRICATION SYSTEM FOR IMPROVEMENT IN MACHINING PROCESS PERFOMANCE


Submitted by
JAYAKRISHNAN R




Abstract

Liquid lubricants have traditionally been used to control the high heat generation in machining; however, the use of cutting fluid has become more problematic in terms of both employee health and environmental pollution. Minimization or possible elimination of cutting fluids substituting their functions by some other means is emer ....etc

[:=Read Full Message Here=:]

HISTORY


The Oil Mist principle was developed by a bearing manufacturer in Europe during the 1930s. The problem that nurtured this development was the inability to satisfactorily lubricate high-speed spindle bearings on grinders and similar equipment. In 1948, oil mist was brought to the United States in the steel industry. Since'the late 1950% oil mist has been servicing rotating equipment 'in the refining industry. The first use of oil mist in the petrochemical indust ....etc

[:=Read Full Message Here=:]

PRESENTED BY:
D.Chamundeswari


Lubrication Systems
Classification of Lubricants
 Animal
 Vegetable
 Mineral
 Synthetic
 Animal Lubricants
Lubricants with animal origin:
– Tallow
– Tallow oil
– Lard oil
– Neat’s foot oil
– Sperm oil
– Porpoise oil
These are highly stable at normal temperatures
 Animal lubricants may not be used for internal combustion because they produce fatty acids
Vegetable Lubricants
 Examples of vegetable lubricants are:
– ....etc

[:=Read Full Message Here=:]