PRESENTED BY:
D.Chamundeswari


Lubrication Systems
Classification of Lubricants
 Animal
 Vegetable
 Mineral
 Synthetic
 Animal Lubricants
Lubricants with animal origin:
– Tallow
– Tallow oil
– Lard oil
– Neat’s foot oil
– Sperm oil
– Porpoise oil
These are highly stable at normal temperatures
 Animal lubricants may not be used for internal combustion because they produce fatty acids
Vegetable Lubricants
 Examples of vegetable lubricants are:
– ....etc

[:=Read Full Message Here=:]

An Optimized Low Heat Rejection Engine for Automotive Use - An Inceptive Study
GOVERNMENT OF KERALA
DEPARTMENT OF TECHNICAL EDUCATION

Govt. Rajiv Gandhi Institute of Technology


ABSTRACT
An unconventional low heat rejection (LHR) engine design is described. Previous research efforts into LHR concepts, including high temperature materials and tribology, are reviewed. The continued reliance on conventional compression ignition designs is identified as a significant roadblo ....etc

[:=Read Full Message Here=:]

DNA COMPUTING
A SEMINAR REPORT
Submitted by
JOBIN RAJ
in partial fulfillment for the award of the degree
of
BACHELOR OF TECHNOLOGY
in
COMPUTER SCIENCE & ENGINEERING
SCHOOL OF ENGINEERING
COCHIN UNIVERSITY OF SCIENCE AND
TECHNOLOGY,
COCHIN “ 682022
NOVEMBER 2008Page 2

DIVISION OF COMPUTER ENGINEERING
SCHOOL OF ENGINEERING
COCHIN UNIVERSITY OF SCIENCE AND
TECHNOLOGY, COCHIN “ 682022
Bonafide Certificate
Certified that this seminar report titled DNA Computing is the bona
fide work done by Jobin Raj who carried ....etc

[:=Read Full Message Here=:]

HISTORY


The Oil Mist principle was developed by a bearing manufacturer in Europe during the 1930s. The problem that nurtured this development was the inability to satisfactorily lubricate high-speed spindle bearings on grinders and similar equipment. In 1948, oil mist was brought to the United States in the steel industry. Since'the late 1950% oil mist has been servicing rotating equipment 'in the refining industry. The first use of oil mist in the petrochemical indust ....etc

[:=Read Full Message Here=:]

I am looking for references about aircraft control cable lubrication. Please help. Best regards, Viorel PadureanD ....etc

[:=Read Full Message Here=:]

DEVELOPMENT OF ELECTROSTATIC SOLID LUBRICATION SYSTEM FOR IMPROVEMENT IN MACHINING PROCESS PERFOMANCE


Submitted by
JAYAKRISHNAN R




Abstract

Liquid lubricants have traditionally been used to control the high heat generation in machining; however, the use of cutting fluid has become more problematic in terms of both employee health and environmental pollution. Minimization or possible elimination of cutting fluids substituting their functions by some other means is emer ....etc

[:=Read Full Message Here=:]

ABSTRACT
Metal cutting fluids changes the performance of machining operations because of their lubrication, cooling, and chip flushing functions. Typically, in the machining of hardened steel materials, no cutting fluid is applied in the interest of low cutting forces and low environmental impacts. Minimum quantity lubrication (MQL) presents itself as a viable alternative for hard machining with respect to tool wear, heat dissertation, and machined surface quality. This study compares the mechanical performance of mini ....etc

[:=Read Full Message Here=:]

PRESENTED BY:
V. Praveen Kumar


Protein Characterization
Why do we analyse proteins?
• Proteins play crucial roles in nearly all biological processes. These many functions of proteins are a result of the folding of proteins into many distinct 3D structures.
• Protein analysis tries to explore how amino acid sequences specify the structure of proteins and how these proteins bind to substrates and other molecules to perform their functions.
• Protein analysis allows us to understand the function of the p ....etc

[:=Read Full Message Here=:]

PRESENTED BY:
D.Chamundeswari


Lubrication Systems
Classification of Lubricants
 Animal
 Vegetable
 Mineral
 Synthetic
 Animal Lubricants
Lubricants with animal origin:
– Tallow
– Tallow oil
– Lard oil
– Neat’s foot oil
– Sperm oil
– Porpoise oil
These are highly stable at normal temperatures
 Animal lubricants may not be used for internal combustion because they produce fatty acids
Vegetable Lubricants
 Examples of vegetable lubricants are:
– ....etc

[:=Read Full Message Here=:]

respected sir,
I am doing project on Minimum Quantity Lubrication,so for that i want seminar report(referances),so kindly help me.

Thank You
Pravin
([email protected]) ....etc

[:=Read Full Message Here=:]

I require the cylinder lubrication
Regards
Vijay Maske ....etc

[:=Read Full Message Here=:]

sir,please sent me ppt of oil mist lubrication ....etc

[:=Read Full Message Here=:]

minimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum quantity lubricant pptminimum qu ....etc

[:=Read Full Message Here=:]

Respected sir,
I want to do the project on Minimum Quantity Lubrication for that purpose i required referances (litreture)for the synopsis.Pls consider my needyness & help to me.

Thanks & Regards
Pravin Patil
[email protected]
for project i want data on minimum quantity lubrication,Pls send for needy. ....etc

[:=Read Full Message Here=:]

HISTORY


The Oil Mist principle was developed by a bearing manufacturer in Europe during the 1930s. The problem that nurtured this development was the inability to satisfactorily lubricate high-speed spindle bearings on grinders and similar equipment. In 1948, oil mist was brought to the United States in the steel industry. Since'the late 1950% oil mist has been servicing rotating equipment 'in the refining industry. The first use of oil mist in the petrochemical indust ....etc

[:=Read Full Message Here=:]

A patented new power machine concept has been designed and analyzed for production, and proof of principle subscale tests have been performed, with positive results. The machine design concept is applicable as a compressor, pump, motor, or engine. Simplicity of design based on spherical ball pistons enables a low moving part count, high power to weight ratio, elimination of valve train and water cooling systems, and perfect dynamic balance.The new design concept utilizes novel kinematic design to completely eliminate inertial loads that would c ....etc

[:=Read Full Message Here=:]

Electronic paper (E-paper)



is a portable, reusable storage and display medium that looks like paper but can be repeatedly written on (refreshed) by electronic means , thousands or millions of times. E-paper will be used for applications such as e-books, electronic newspapers, portable signs, and foldable, rollable displays. Information to be displayed is downloaded through a connection to a computer or a cell phone, or created with mechanical tools such as an electr ....etc

[:=Read Full Message Here=:]

This article is presented by:
SUDEESH S
COMPUTER SCIENCE AND ENGINEERING
SCHOOL OF ENGINEERING
COCHIN UNIVERSITY OF SCIENCE &TECHNOLOGY,
KOCHI-682022
OPTICAL CAMOUFLAGE
ABSTRACT

While new high-performance, light-transmitting materials such as aerogel and light-transmitting concrete compel us to question the nature of solidity, a new technology developed by ....etc

[:=Read Full Message Here=:]

ABSTRACT
Metal cutting fluids changes the performance of machining operations because of their lubrication, cooling, and chip flushing functions. Typically, in the machining of hardened steel materials, no cutting fluid is applied in the interest of low cutting forces and low environmental impacts. Minimum quantity lubrication (MQL) presents itself as a viable alternative for hard machining with respect to tool wear, heat dissertation, and machined surface quality. This study compares the mechanical performance of mini ....etc

[:=Read Full Message Here=:]