Please tell me how to estimate the charge induce on two identical styrofoam using guass theorem for my project
With all the necessary information like theory procedure readings and all calculations. ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Spacecraft propulsion is used to change the velocity of spacecraft and artificial satellites. There are many different methods. Each method has drawbacks and advantages, and spacecraft propulsion is an active area of research. Most spacecraft today are propelled by heating the reaction mass and allowing it to flow out the back of the vehicle.For propulsion the required product is the velocity of the exhaust products of the reaction. All current spacecraft use chemical rocket for launch.
....etc

[:=Read Full Message Here=:]

can any one give me a report on Electrostatic Generator ....etc

[:=Read Full Message Here=:]

Combined aerodynamic and electrostatic atomization of dielectric
liquid jets




Abstract

The electrical and atomization performance of a
plane–plane charge injection atomizer using a dielectric
liquid, and operating at pump pressures ranging from 15 to
35 bar corresponding to injection velocities of up to 50 m/s,
is explored via low current electrical measurements, spray
imaging and phase Doppler anemometry. The work is
aimed at understanding the contribution of electrostatic
charging relevant t ....etc

[:=Read Full Message Here=:]

1. INTRODUCTION
1.1 Micro Electro-Mechanical System (MEMS)
Micro electro-mechanical structures and systems are miniature devices that enable the operation of complex systems. They exist today in many environments, especially automotive, medical, consumer, industrial, and aerospace. Their potential for future penetration into a broad range of applications is real, supported by strong developmental activities at many companies and institutions. The technology consists of a large portfolio of design and fabrication p ....etc

[:=Read Full Message Here=:]

An electrostatic generator is a mechanical device that produces continuous current . The knowledge of static electricity dates back to the earliest civilizations, but for millennia it remained merely an interesting and mystifying phenomenon. The development of electrostatic machines did not begin in earnest until the 18th Century. Electrostatic generators operate by using manual (or other) power to transform mechanical work into electric energy. Electrostatic generators develop electrostatic charges of opposite sign rendered to divided conducto ....etc

[:=Read Full Message Here=:]

ABSTRACT

A new concept for the interplanetary and interstellar mission engine. All current spacecraft use chemical rocket for launch and this fusion propulsion system uses fusion rockets for launch. Fusion propulsion has the potential to produce high speed transportation any where in the universe. In this propulsion use fusion reactions to produce thrust to propel rockets. In order to occur fusion we have to create conditions like high temperature about 100 million degree celcius and high pressure. At these conditions plasma is fo ....etc

[:=Read Full Message Here=:]

[email protected] ....etc

[:=Read Full Message Here=:]

DEVELOPMENT OF ELECTROSTATIC SOLID LUBRICATION SYSTEM FOR IMPROVEMENT IN MACHINING PROCESS PERFOMANCE


Submitted by
JAYAKRISHNAN R




Abstract

Liquid lubricants have traditionally been used to control the high heat generation in machining; however, the use of cutting fluid has become more problematic in terms of both employee health and environmental pollution. Minimization or possible elimination of cutting fluids substituting their functions by some other means is emer ....etc

[:=Read Full Message Here=:]

Wireless power
From Wikipedia, the free encyclopedia
Wireless power or wireless energy transmission is the transmission of electrical energy from a power source to an electrical load without man-made conductors. Wireless transmission is useful in cases where interconnecting wires are inconvenient, hazardous, or impossible. The problem of wireless power transmission differs from that of wireless telecommunications, such as radio. In the latter, the proportion of energy received becomes critical only if it is t ....etc

[:=Read Full Message Here=:]

ABSTRACT

Switching products technologies ranges from traditional Electro Mechanical Relays (EMR) and reed relays to semiconductor switches made of silicon or GaAs materials. A new type of device is currently getting to commercialization. The first sales of RF MEMS switches outside DOD programs have been realized by Teravicta in 2006. The achievements of RadantMEMS in USA DOD programs, the first commercial product sales from Teravicta in 2006 and the 4 other competitors (MEW, XCOMwirel ....etc

[:=Read Full Message Here=:]

An electrostatic generator is a mechanical device that produces continuous current . The knowledge of static electricity dates back to the earliest civilizations, but for millennia it remained merely an interesting and mystifying phenomenon. The development of electrostatic machines did not begin in earnest until the 18th Century. Electrostatic generators operate by using manual (or other) power to transform mechanical work into electric energy. Electrostatic generators develop electrostatic charges of opposite sign rendered to divided conducto ....etc

[:=Read Full Message Here=:]

sir, iam an engineering student for my project work i need complete information regarding ELECTRO STATIC MOTOR, as ppt and documentation with photos and video explaining working plz send to my mail [email protected] ....etc

[:=Read Full Message Here=:]

FUSIONPROPULSION
ABSTRACT
Spacecraft propulsion is used to change the velocity of spacecraft and artificial satellites. There are many different methods. Each method has drawbacks and advantages, and spacecraft propulsion is an active area of research. Most spacecraft today are propelled by heating the reaction mass and allowing it to flow out the back of the vehicle.For propulsion the required product is the velocity of the exhaust products of the reaction. All current spacecraft use chemical rocket ....etc

[:=Read Full Message Here=:]

Abstract:
We developed an electrostatic micro power generator for low frequency energy harvesting applications. This micro power generator consists of a new vibration structure and new electret electrode. The advantage of this micro power generator is the high power generation structure of both the controlled gap
between electrodes and long-range moving at low frequency. This generator shows 40+W of power output at very low frequency vibration (2Hz, 0.4G).

INTRODUCTION:

Nowada ....etc

[:=Read Full Message Here=:]

1.defination.
2.types of electro static generator.
3.advantages.
4.disadvantages.
5.applications.
6.how it differ from other type of generators? ....etc

[:=Read Full Message Here=:]

[email protected] ....etc

[:=Read Full Message Here=:]

Abstract:
We developed an electrostatic micro power generator for low frequency energy harvesting applications. This micro power generator consists of a new vibration structure and new electret electrode. The advantage of this micro power generator is the high power generation structure of both the controlled gap
between electrodes and long-range moving at low frequency. This generator shows 40+W of power output at very low frequency vibration (2Hz, 0.4G).

INTRODUCTION:

Nowada ....etc

[:=Read Full Message Here=:]