hi sir/mam
i vijji, interested to know about advantages and disadvantages of 6t sram cell ....etc

[:=Read Full Message Here=:]

ERP Implementation in Common:-

1) Involve the user community
2) Examine processes and match as close as possible to the selected system
3) Change your processes rather than customizing
4) Take system live when everything is ready not on some specific date
5) Existing problems should be fixed before implementing system

Cost involved in ERP

1) Training
2) Integration & testing
3) Data conversion
4) Data analysis
5) ERP consultants

Big six consultants for ERP

1) Anderson co ....etc

[:=Read Full Message Here=:]

An adequate blood flow supply is necessary for all organs of the body. Analysis of the blood flow finds its importance in the diagnoses of diseases. There are many techniques for analyzing the blood flow. These techniques are not affordable by the poor people because of their high expense. So we have implemented a technique called Zoom-FFT. This technique is simple and affordable to detect the blood clots and other diseases.

Human with his potential tries to get whichever is unexplored, explored, and till now we are managing and succeeding u ....etc

[:=Read Full Message Here=:]

Fastest Clock Speed up to 550 MHz and Total Data Rate up to 80
Gbps; Dramatically Expanding the Performance of Networking and Signal Processing
Applications Compared with 90-nm SRAMs, Cypresss 65-nm QDR and DDR SRAMs offer up to 50% lower standby and dynamic current consumption, enabling the new wave of green networking infrastructure applications. The QDRII+ and DDRII+ devices have
On-Die Termination (ODT), which improves signal integrity, reduces system cost,
and saves board space by eliminating external termination resistors. The 65-n ....etc

[:=Read Full Message Here=:]

ABSTRACT

Leakage power consumption is large fraction of the total power consumption in contemporary VLSI designs. Since memories occupy a large portion of the total area of many high-performance ICs, it is crucial to reduce the leakage energy of memories. This problem is particularly aggravated for memories implemented in the 45nm technology node, since these processes exhibit significantly higher leakage power. For these memories, leakage is a significant problem not only from a power point of view, but also from performance degradation st ....etc

[:=Read Full Message Here=:]

Implementation Of Zoom FFT in Ultrasonic Blood Flow Analysis

Introduction
An adequate blood flow supply is necessary for all organs of the body. Analysis of the blood flow finds its importance in the diagnoses of diseases. There are many techniques for analyzing the blood flow. These techniques are not affordable by the poor people because of their high expense. So we have implemented a technique called Zoom-FFT. This technique is simple and affordable to detect the blood clots and other diseases.

Human with his potential tries to get wh ....etc

[:=Read Full Message Here=:]

hi iam mohammed i would like to get datails on vlsi projects sram ....etc

[:=Read Full Message Here=:]

ABSTRACT


Data storage is a growing need in these days. With the advent of new technologies the concept of “more data in less space” is gaining importance day by day.

Most commonly used semiconductor memory is SRAM. Static Random Access Memory (SRAM) is a type of semiconductor memory where the word static indicates that unlike Dynamic RAM (DRAM) it does not need to be periodically refreshed, as SRAM is volatile in the conventional sense that data is eventu ....etc

[:=Read Full Message Here=:]

Benton Highsmith Calhoun, Member, IEEE, and Anantha P. Chandrakasan, Fellow, IEEE

Abstract—
Low-voltage operation for memories is attractive because of lower leakage power and active energy, but the challenges of SRAM design tend to increase at lower voltage. This paper explores the limits of low-voltage operation for traditional six–transistor (6 T) SRAM and proposes an alternative bitcell that functions to much lower voltages. Measurements confirm that a 256-kb 65-nm SRAM test chi ....etc

[:=Read Full Message Here=:]

ABSTRACT:- In the autumn of 1969, we decided to try a new approach to the design of a virtual machine operating system. Until that time, most installations using Virtual Machine Monitors merely ran operating systems that already existed for €œstand-alon use. Few, if any, installations had attempted to design and create an operating system that took advantage of its running environment. The Virtual Machine Monitor we were using was a highly modified version of CP-67 which was designed to operate on an IBM S/360 Model ....etc

[:=Read Full Message Here=:]