ABSTRACT
For some organization it is essential to distribute the data at that instant itself. The controlling unit collects the data made in form suitable to transfer. 8051 controller is used as control unit for collecting data and transferring using USART.
Data loggers are used to collect and centralize the data for processing. This project is a proto type for such system. Two boards are there in this project each board contains sensors, these are interfaced to the microcontroller. The microcontroller collects the ....etc

[:=Read Full Message Here=:]

ABSTRACT
I2C is a serial interchip communication protocol used for data transfer between chips developed by Philips in order over come the drawback of PCB complexity due to parallel communication which requires 8 pin interface between the chips with the I2C protocol this 8 pins can be reduced to only 2 lines one is data line and one is clock line.
Many devices such RTC, EEPROM, Temperature sensor etc will come with inbuilt I2C engine which helps in reducing the consumption of micro controller pins which is got t ....etc

[:=Read Full Message Here=:]

information about want information about bluetooth based data logger for industrial purposes using arm ....etc

[:=Read Full Message Here=:]

respected sir /madam i want the working of multipoint temperature and data logger and display on pc through zigbee using psoc. hence i kindly request you to help me in this regard
i want the working process of multi point temperature and data logger and display on pc through zigbee using psoc .so please provide me the detailed explaination about this project along with its advantages disadvantages and applications as well as source code.
thanking you ....etc

[:=Read Full Message Here=:]

Built-In Self-Test and Calibration of Mixed-Signal Devices


Outline
Introduction
Background
BIST Architecture for Mixed-Signal Devices
Overview of Proposed Architecture
Test of DAC/ADC
Calibration of DAC
Sigma-Delta Modulation
Polynomial Fitting Algorithm
Conclusion
Motivation
Digital BIST techniques
Defect-oriented
Logic BIST, scan chain, boundary scan, JTAG, etc
Mixed-Signal BIST techniques
Specification-oriented
No universally accepted standard
Issues
Parameter deviation
Process variation

App ....etc

[:=Read Full Message Here=:]

Need detailed explaination of the project ....etc

[:=Read Full Message Here=:]

i need the program in c for the above project.... could u send it to me?? ....etc

[:=Read Full Message Here=:]

1. Petrochemical level indicator and controller for automation of cotton purification industries using PSOC Mixed Signal Array
2. Implementation of I2C protocol for EEPROM interfacing using PSOC Mixed Signal Array
3. Proximity Sensor based intelligent Security system using PSoC mixed signal array
4. Auto turn off water pump with four different time slots using PSOC Mixed Signal Array
5. Implementing loopback I2Cprotocol using PSOC Mixed Signal Array
6. Interfacing SPI EEPROM to PSoC mixed signal array
7. Capsense based Industrial applianc ....etc

[:=Read Full Message Here=:]

ION IMPLANTATION
Ion implantation refers to a process whereby dopant ions are introduced into a semiconductor material to change its carrier concentration and conductivity type.

OBJECTIVES
The desired quantity of dopant should be implanted
The dopant should be implanted at the correct depth
The dopant implanted should be restricted to the desired areas of the wafer
The implanted dopants should be electrically active
There should be no damage to the implanted areas

DISCUSSIONS
The basic ion ....etc

[:=Read Full Message Here=:]

is there a proximity sensor in the psoc3 kit . how do i interface one with it. im trying to use it for navigation of a robot.
....etc

[:=Read Full Message Here=:]