mesh based multicast routing in Manet :stable page link based approach
send mesh based multicast routing in Manet:stable page link based approach ppt ....etc

[:=Read Full Message Here=:]

NONLINEAR FEATURE EXTRACTOR FOR TEXTURE SEGMENTATION


presented by
Presented By
Puneet Kumar Sharma
M0819C010
M.Tech-II (Electronic - Computer )


abstract

This article presents a feed-forward network architecture that can be used as a nonlinear feature extractor for texture segmentation. It comprises two layers of feature extraction units; each layer is arranged into several planes, called feature maps. The features extracted from the second layer are used as the final texture features. The featu ....etc

[:=Read Full Message Here=:]

Under the Guidance of Dr. Patil Basavaraj VDept of IP & E
Submitted By Deepak Kothari

Introduction to CWR

The CWR is a rotary forming process, consists
of the forming of forging by means of wedge-shaped tools that are fixed on the mill rolls with the same rotary direction.
In CWR process, there are five stages in the work piece deformation process corresponding to five zones of the wedged tool geometry, i.e., knifing, guiding, stretching, shaping, and siz ....etc

[:=Read Full Message Here=:]

Abstract


Methods to synthesize controllers for nonlinear systems are developed by exploiting the fact that under mild differentiability conditions, systems of the form:

x = f (x) + G(x)u
can be represented in quasilinear form, viz:
x = A(x)x + B(x)u
Two classes of control methods are investigated:
¢ zero-look-ahead control, where the control input depends only on the current val¬ues of A(x), B{x). For this case the control input is computed by continuously solving a matrix Ricatti equation as the system progresses along ....etc

[:=Read Full Message Here=:]

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGG.

KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENT
KURUKSHETRA- 136119



Microelectromechanical systems
Microelectromechanical systems (MEMS) (also written as micro-electro-mechanical, MicroElectroMechanical or microelectronic and microelectromechanical systems) is the technology of very small mechanical devices driven by electricity; it merges at the nano-scale into nanoelectromechanical systems (NEMS) and nanote ....etc

[:=Read Full Message Here=:]

Nonlinear Piezolectric Generators

presenterd by:
Francesco Cottone



Outline
Introduction: mobile powering issues

Present Vibration Piezoelectric Power Generators

Non-linear piezo-osclillator models
numerical result (Matlab)
finite elements modelling of linear and non-linear oscillators (Comsol)

Conclusions and forthcoming work



Applications examples of WSN
Environmental Monitoring
Habitat Monitoring
Integrated Biology
Structural Monitoring
Interactive and Control
RFID
Medical bi ....etc

[:=Read Full Message Here=:]

I begin to use the comsol bofore two days, and I need some help for using comsol to simulate the solar cell,such as how to set the model of solar cell ,and so on ....etc

[:=Read Full Message Here=:]

ABSTRACT

VEHICLE HANDLING, STABILITY,AND BIFURCATION ANALYSIS FOR NONLINEAR VEHICLE MODELS

Vehicle handling, stability, and bifurcation of equilibrium conditions were studied
using a state vector approach. The research provided a framework for an
improved method of vehicle handling assessment that included non-linear regions
of performance and transient behavior. Vehicle models under pure lateral slip,
constant velocity, and constant front steer were developed. Four-wheel, two-axle
vehicle models were evolved from si ....etc

[:=Read Full Message Here=:]

Spectral and nonlinear optical characteristics of nanocomposites
of ZnO“CdS
Litty Irimpan,
a
V. P. N. Nampoori, and P. Radhakrishnan
International School of Photonics, Cochin University of Science and Technology, Cochin,
Kerala 682022, India
Received 21 December 2007; accepted 6 March 2008; published online 8 May 2008
In this article, we present the spectral and nonlinear optical properties of ZnO“CdS nanocomposites
prepared by colloidal chemical synthesis. The optical band gap E
g
of the material is tunable
between 2.6 ....etc

[:=Read Full Message Here=:]

The primary objective of a design engineer is to ensure a safe, efficient design of equipment to carry out a process. This needs a good understanding of the various processes occurring in the system. The operation of the equipment under varying operating conditions must be analyzed since any process is prone to disturbances. This needs a model which captures all interactions. Such a model can be used for nonlinear analysis and to subsequently develop control strategies and optimize plant operation. The steady state and dynamic behavior is predi ....etc

[:=Read Full Message Here=:]