Please help me to get the detailed information on design and implementation of knockout atm switch. ....etc

[:=Read Full Message Here=:]

Definition

Cellular through remote control switch implies control of devices at a remote location via circuit interfaced to the remote telephone line/device by dialing specific DTMF (dual tune multi frequency) digits from a local telephone. This project Cellular through remote control switch has the following features

1. It can control multiple load (on/off/status each load)
2. It provides you feedback when the circuit is in energized state and also sends an acknowledgement indicating action with respect to the switching on of each load ....etc

[:=Read Full Message Here=:]

Under the Guidance of Dr. Patil Basavaraj VDept of IP & E
Submitted By Deepak Kothari

Introduction to CWR

The CWR is a rotary forming process, consists
of the forming of forging by means of wedge-shaped tools that are fixed on the mill rolls with the same rotary direction.
In CWR process, there are five stages in the work piece deformation process corresponding to five zones of the wedged tool geometry, i.e., knifing, guiding, stretching, shaping, and siz ....etc

[:=Read Full Message Here=:]

I begin to use the comsol bofore two days, and I need some help for using comsol to simulate the solar cell,such as how to set the model of solar cell ,and so on ....etc

[:=Read Full Message Here=:]

ABSTRACT
We designed and created a semi-wireless keyboard, audio, video and mouse (KAVM) switch. The KAVM switch allows a centralized Base Station to interface with Remote Stations connected to individual computers. Although we were not able to transmit all of our data wirelessly, the design allows for easy integration with wireless digital transceivers.
The device uses a quasi-TCP/IP protocol to transmit control data. The keyboard and mouse data are constantly sent from the Base Station to the currently enabled ....etc

[:=Read Full Message Here=:]

i need the list of materials/components as well as circuit drawing for the automatic changeover switch ....etc

[:=Read Full Message Here=:]

Definition

Space switch fabric architecture is shown in figure. The switch consists of N incoming and N out going fiber links, with n wavelengths running on each fiber link. The switch is slotted, and the length of the slot is such that an optical packet can be transmitted and propagated from an input port to an out put optical buffer.

The switch fabric consists of three parts; optical packet encoder, space switch, and optical packet buffer. The optical packet buffer works as follows. For each incoming fiber link, three is an optical demu ....etc

[:=Read Full Message Here=:]

Definition

Space switch fabric architecture is shown in figure. The switch consists of N incoming and N out going fiber links, with n wavelengths running on each fiber link. The switch is slotted, and the length of the slot is such that an optical packet can be transmitted and propagated from an input port to an out put optical buffer.

The switch fabric consists of three parts; optical packet encoder, space switch, and optical packet buffer. The optical packet buffer works as follows. For each incoming fiber link, three is an optical demu ....etc

[:=Read Full Message Here=:]

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGG.

KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENT
KURUKSHETRA- 136119



Microelectromechanical systems
Microelectromechanical systems (MEMS) (also written as micro-electro-mechanical, MicroElectroMechanical or microelectronic and microelectromechanical systems) is the technology of very small mechanical devices driven by electricity; it merges at the nano-scale into nanoelectromechanical systems (NEMS) and nanote ....etc

[:=Read Full Message Here=:]

Abstract

This paper presents the design of a clap activated switch device that will serve well in different phono-controlled applications, providing inexpensive key and at the same time flee from false triggering. This involves the design of various sages consisting of the pickup transducer, low frequency, audio low power and low noise amplifier, timer, bistable and switches. It also consists of special network components to prevent false triggering and ensure desired performance objectives. A decade counter IC serves the bistabl ....etc

[:=Read Full Message Here=:]