AUTOMOBILE EMISSIONS CONTROL AND MONITORING BY MONOPOLE MAGNETIC DEVICE AND REMOTE SENSING TECHNOLOGY
Abstract
Monopole magnetic device and Remote Sensing Technology (RST) are used to monitor and control automobile emissions to prevent the pollution and protect the environment. Monopole magnetic device reduces the level of noxious gases in exhaust fumes of vehicles. The carbon monoxide (co) level is reduced almost zero in the vehicles. It also claims a substational reduction in hydrocarbon emission in all the vehicles. T ....etc

[:=Read Full Message Here=:]

1.The angle between two curved lines is known as :
(A)Spherical angle
(B) Obtuse angle
(C ) Acute angle
(D) Deflection angle

2.Which of the following is the classification based upon the system of surveying ?
(A)Chain surveying
(B)Triangulation surveying
(C )City surveying
(D)Mine surveying

3.The survey that does not deal with mapping of large water bodies is :
(A)Hydrographic Survey
(B)Navigation Survey
(C )Marine Survey
(D)Cadastral Survey

4.During the office work, surveyor does :
(A)Design of struct ....etc

[:=Read Full Message Here=:]

Composites of shape memory alloys (SMA) with a matrix have been widely studied to suppress the propagation of damage. In these studies, the SMA is used as an actuator. A multi-functional SMA as both sensor and actuator is suitable for constructing intelligent material, such as a material with a sensing and suppressing function. The damage of materials is related to the amount of strain. We studied the use of SMA wire parts as sensors to measure the amount of strain for damage estimation. The acoustic emission (AE) signals induced by phase tran ....etc

[:=Read Full Message Here=:]

155/2015
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.The maximum twisting moment a shaft can resist, is the product of the 
permissible shear stress and:
(A)Moment of inertia
(B) Polar moment of inertia
(C ) Polar modulus
(D) Modulus of rigidly

2.A beam of length L is pinned at both ends and is subjected to a 
concentrated bending couple of moment M at its centre. The maximum bending 
moment in the beam is :
(A)ML/2
(B)M
(C )M/3
(D)M/2

3.In plastic analysis, the shape factor for a triangular ....etc

[:=Read Full Message Here=:]

CONSTRUCTION SAFETY CLIMATE
IN DEVELOPING COUNTRY
BIKARAMA PRASAD YADAV
SENIOR HSE- MANAGER
SOMA ENTERPRISES LTD
DMRC PROJECT
Email - [email protected]
Safety in the construction industry has always
been a major issue. Wherever reliable records are
available, construction is found to be one of the
most dangerous on safety and health criteria,
particularly in developing countries. Though much
improvement in construction safety has been
achieved, the industry still continues to lag behind
most other industries with regard to ....etc

[:=Read Full Message Here=:]

ABSTRACT Participant Name : Manickam. AR Title of Paper : Influence of an iron fuel additive on the performance and emissions of a DI diesel engine. Project Work Carried out at College of Engineering, Anna University, Chennai “ 600 025, South India for the course, Master of Engineering in Internal Combustion Engineering, May 2007. This program used a twin cylinder 0.6 litre DI NA diesel engine to study the influence of ferrocene as a fuel additive on performance Characteristics and particulate and Nox emissions. Diesel fuel additives are ....etc

[:=Read Full Message Here=:]

ABSTRACT Participant Name : Manickam. AR Title of Paper : Influence of an iron fuel additive on the performance and emissions of a DI diesel engine. Project Work Carried out at College of Engineering, Anna University, Chennai “ 600 025, South India for the course, Master of Engineering in Internal Combustion Engineering, May 2007. This program used a twin cylinder 0.6 litre DI NA diesel engine to study the influence of ferrocene as a fuel additive on performance Characteristics and particulate and Nox emissions. Diesel fuel additives are ....etc

[:=Read Full Message Here=:]

This article is presented by:
D. Chandrasekharam
Department of Earth Sciences
Indian Institute of Technology
Bombay 400076, India
GEOTHERMAL ENERGY RESOURCES OF INDIA: COUNTRY UPDATE

ABSTRACT
All the geothermal provinces of India are located in areas with high heat flow and geothermal gradients. The heat flow and thermal gradient values vary from 75–468 mW/m2 and 59–234°C respectively. Additional exploration studies and reservoir modelling have ....etc

[:=Read Full Message Here=:]

STUDYING THE PROCUREMENT MANAGEMENT SYSTEM IN CROSS COUNTRY NATURAL GAS PIPELINE PROJECTS & SUGGEST TECHNIQUE FOR IMPROVE THE PROCESS
Executive summary
The project title is “Studying the procurement management system in Cross Country Natural Gas pipeline projects & suggest techniques to improve the process”. This report is divided in five main parts. First is introduction about company GSPL and industry in which GSPL is working. Second tells about the different project activities in a project. Third chapt ....etc

[:=Read Full Message Here=:]

Abstract
The influence of the diesel particulate filter additives (DPA) SATACEN and EOLYS on biodiesel fuel quality has been evaluated. Both additives significantly affected the oxidation stability of neat biodiesel. The influence on acid values and CFPP was found to be only small. Combination of diesel additives with biodiesel additives like oxidation stability and CFPP improvers led to similar results. Results indicated that DPA also lowered the efficiency of the oxidation stability improver Baynox. Furthermore, the CFPP additives Chimec an ....etc

[:=Read Full Message Here=:]