1.The angle between two curved lines is known as :
(A)Spherical angle
(B) Obtuse angle
(C ) Acute angle
(D) Deflection angle

2.Which of the following is the classification based upon the system of surveying ?
(A)Chain surveying
(B)Triangulation surveying
(C )City surveying
(D)Mine surveying

3.The survey that does not deal with mapping of large water bodies is :
(A)Hydrographic Survey
(B)Navigation Survey
(C )Marine Survey
(D)Cadastral Survey

4.During the office work, surveyor does :
(A)Design of struct ....etc

[:=Read Full Message Here=:]

i need complete documentation and ppt for the topic qr codes for technical seminar .. please can any one help me with this... i neeed to submit the documentation tommorow. please mail to [email protected] ....etc

[:=Read Full Message Here=:]

i want to make project on BAR CODE READER AND DECODER in VLSI tech. so please give me VHDL code for BAR CODE READER AND DECODER... ....etc

[:=Read Full Message Here=:]

Introduction

The goal was to create a four bar linkage and demonstrate its motion with a hand crank. We went above and beyond the rubric by adding 5 other legs. It didn't need to turn, it didn't need to be efficient, it just had to demonstrate we did the calculations and analysis of the path of the outer most point of the linkage. ....etc

[:=Read Full Message Here=:]

CONSTRUCTION SAFETY CLIMATE
IN DEVELOPING COUNTRY
BIKARAMA PRASAD YADAV
SENIOR HSE- MANAGER
SOMA ENTERPRISES LTD
DMRC PROJECT
Email - [email protected]
Safety in the construction industry has always
been a major issue. Wherever reliable records are
available, construction is found to be one of the
most dangerous on safety and health criteria,
particularly in developing countries. Though much
improvement in construction safety has been
achieved, the industry still continues to lag behind
most other industries with regard to ....etc

[:=Read Full Message Here=:]

This article is presented by:
D. Chandrasekharam
Department of Earth Sciences
Indian Institute of Technology
Bombay 400076, India
GEOTHERMAL ENERGY RESOURCES OF INDIA: COUNTRY UPDATE

ABSTRACT
All the geothermal provinces of India are located in areas with high heat flow and geothermal gradients. The heat flow and thermal gradient values vary from 75–468 mW/m2 and 59–234°C respectively. Additional exploration studies and reservoir modelling have ....etc

[:=Read Full Message Here=:]

STUDYING THE PROCUREMENT MANAGEMENT SYSTEM IN CROSS COUNTRY NATURAL GAS PIPELINE PROJECTS & SUGGEST TECHNIQUE FOR IMPROVE THE PROCESS
Executive summary
The project title is “Studying the procurement management system in Cross Country Natural Gas pipeline projects & suggest techniques to improve the process”. This report is divided in five main parts. First is introduction about company GSPL and industry in which GSPL is working. Second tells about the different project activities in a project. Third chapt ....etc

[:=Read Full Message Here=:]

could u plz post d detail seminar report on bar codes ....etc

[:=Read Full Message Here=:]

Article about what the bar code really is, how it is calculated and what it hides, so ingeniously. The numbers are represented by vertical lines and bars, with variable width, either black (which you easily see) or white (some of them you don't, like those at the margins). Those codes are said to make the work much easier, as there are used optical detectors to read the numbers. Each number is generated function of a product code.

Download Full Seminar Report
Downlaod ....etc

[:=Read Full Message Here=:]

155/2015
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.The maximum twisting moment a shaft can resist, is the product of the 
permissible shear stress and:
(A)Moment of inertia
(B) Polar moment of inertia
(C ) Polar modulus
(D) Modulus of rigidly

2.A beam of length L is pinned at both ends and is subjected to a 
concentrated bending couple of moment M at its centre. The maximum bending 
moment in the beam is :
(A)ML/2
(B)M
(C )M/3
(D)M/2

3.In plastic analysis, the shape factor for a triangular ....etc

[:=Read Full Message Here=:]