1.The angle between two curved lines is known as :
(A)Spherical angle
(B) Obtuse angle
(C ) Acute angle
(D) Deflection angle

2.Which of the following is the classification based upon the system of surveying ?
(A)Chain surveying
(B)Triangulation surveying
(C )City surveying
(D)Mine surveying

3.The survey that does not deal with mapping of large water bodies is :
(A)Hydrographic Survey
(B)Navigation Survey
(C )Marine Survey
(D)Cadastral Survey

4.During the office work, surveyor does :
(A)Design of struct ....etc

[:=Read Full Message Here=:]

Can i please know the latest SLU-CEE 100 passers? ....etc

[:=Read Full Message Here=:]

155/2015
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.The maximum twisting moment a shaft can resist, is the product of the 
permissible shear stress and:
(A)Moment of inertia
(B) Polar moment of inertia
(C ) Polar modulus
(D) Modulus of rigidly

2.A beam of length L is pinned at both ends and is subjected to a 
concentrated bending couple of moment M at its centre. The maximum bending 
moment in the beam is :
(A)ML/2
(B)M
(C )M/3
(D)M/2

3.In plastic analysis, the shape factor for a triangular ....etc

[:=Read Full Message Here=:]

This article is presented by:
D. Chandrasekharam
Department of Earth Sciences
Indian Institute of Technology
Bombay 400076, India
GEOTHERMAL ENERGY RESOURCES OF INDIA: COUNTRY UPDATE

ABSTRACT
All the geothermal provinces of India are located in areas with high heat flow and geothermal gradients. The heat flow and thermal gradient values vary from 75–468 mW/m2 and 59–234°C respectively. Additional exploration studies and reservoir modelling have ....etc

[:=Read Full Message Here=:]

please help to get information about hot machining... ....etc

[:=Read Full Message Here=:]

ABSTRACT


Hot isostatic processing (HIP) is the latest method to produce open porous materials, such as ceramics or metals. In this review paper, features and applications of HIPed porous materials are described. Sintering behavior under high pressure gas is also discussed in order to understand how porous materials are obtained by this method. HIPed porous materials have higher open porosity, higher mechanical strength, narrower pore size distribution and higher fluid permeabili ....etc

[:=Read Full Message Here=:]

The new non-lethal weapon using the world's hottest chili. Measuring more than 1,000,000 Scoville units, the bhut jolokia. The chili weapon, a tear gas-like hand grenade stuffed with bhut(ghost) jolokia chilli peppers to immobilize rioters and terrorists without killing them and can able to immobilize suspects and force terrorists out of hiding. The active ingredient in chillis is Oleoresin Capsicum (OC), a complex mixture of organic compounds. Aficionados rate the hotness of chills using the Scoville scale, which measures the amount of dilu ....etc

[:=Read Full Message Here=:]

Definition

Hot Isostatic Processing (HIP)
Application of high temperature and high pressure to remove internal porosity, consolidate powder for alloys, and diffuse bond.
Materials that can be HIPped
Titanium, beryllium, steel, aluminum, superalloys


Overview
Equipment used
Applications
Powder consolidation
Healing of casting defects
Diffusion bonding
Aerospace application
Pressures reach 200 Mpa
Temperatures reach 2000 degrees Celsius
Size of pressure vessel ranges from smaller than 4X12 up ....etc

[:=Read Full Message Here=:]

CONSTRUCTION SAFETY CLIMATE
IN DEVELOPING COUNTRY
BIKARAMA PRASAD YADAV
SENIOR HSE- MANAGER
SOMA ENTERPRISES LTD
DMRC PROJECT
Email - [email protected]
Safety in the construction industry has always
been a major issue. Wherever reliable records are
available, construction is found to be one of the
most dangerous on safety and health criteria,
particularly in developing countries. Though much
improvement in construction safety has been
achieved, the industry still continues to lag behind
most other industries with regard to ....etc

[:=Read Full Message Here=:]

STUDYING THE PROCUREMENT MANAGEMENT SYSTEM IN CROSS COUNTRY NATURAL GAS PIPELINE PROJECTS & SUGGEST TECHNIQUE FOR IMPROVE THE PROCESS
Executive summary
The project title is “Studying the procurement management system in Cross Country Natural Gas pipeline projects & suggest techniques to improve the process”. This report is divided in five main parts. First is introduction about company GSPL and industry in which GSPL is working. Second tells about the different project activities in a project. Third chapt ....etc

[:=Read Full Message Here=:]