This article is presented by:
DHARAM VIR
Master of Technology in Electrical Engineering
YMCA INSTITUTE OF ENGINEERING, FARIDABAD
JULY 2009


Analytical Analysis of Double Implanted MOSFET for High Breakdown & Low Power Dissipation using Graded Profile on 6H-SiC Wafer

Objectives of Thesis:

The main objectives of this work were as follows:
Analysis of Double Implanted MOSFET on 6H SiC wafer using uniform doping profile.
Deter ....etc

[:=Read Full Message Here=:]

ABSTRACT
This paper provides an introduction to silicon-on-insulator (SOI) technology and the operating principles of high-voltage SOI devices, reviews the performance of the available SOI switching devices in comparison with standard silicon devices, discusses the reasoning behind the use of SOI technology in power applications and covers the most advanced novel power SOI devices proposed to date. The impact of SOI technology on power integrated circuits (PICs) and the problems associated with the integration of high-voltag ....etc

[:=Read Full Message Here=:]

Hi. I am Jasmine. I need an example of a WBS of a Seminar in the form of Image file or PDF. Kindly help me in this regard. ....etc

[:=Read Full Message Here=:]

work breakdown structure (WBS)

WORK BREAKDOWN STRUCTURE

A project work breakdown structure (WBS) is a deliverable or product-oriented grouping of
project work elements shown in graphical display to organize and subdivide the total work
scope of a project.
The WBS is a particularly important project tool. Considerable thought and planning should
be given to its development and implementation so that subsequent changes are minimized.
Major revisions to a WBS require both substantial effort and r ....etc

[:=Read Full Message Here=:]

1. INTRODUCTION
The history of semiconductor devices starts in 1930â„¢s when Lienfed and Heil first proposed the mosfet. However it took 30 years before this idea was applied to functioning devices to be used in practical applications, and up to the late 1980 this trend took a turn when MOS technology caught up and there was a cross over between bipolar and MOS share.CMOS was finding more wide spread use due to its low power dissipation, high packing density and simple design, such that by 1990 CMOS ....etc

[:=Read Full Message Here=:]

CHAPTER 1: INTRODUCTION
Here is an inexpensive auto cut-off circuit, which is fabricated using transistor and other discrete components. It can be used to protect loads such as refrigerator, T.V., and VCR from undesirable over and under line voltages, as well as surges caused due to sudden failure/resumption of main power supply. This circuit can be used directly as a standalone circuit between the mains supply and the load, or it may be inserted between an existing automatic/manual stabilizer and the load.
The over/u ....etc

[:=Read Full Message Here=:]

ABSTRACT
As the demand for higher engine efficiencies and lower emissions drive stationary, spark-ignited reciprocating engine combustion to leaner air/fuel operating conditions and higher in-cylinder pressures, increased spark energy is required for maintain stable combustion and low emissions. Unfortunately, increased spark energy negatively impacts spark plug durability and its effectiveness in transmitting adequate energy as an ignition source. Laser ignition offers the potential to improve ignition system durability, reduce ma ....etc

[:=Read Full Message Here=:]

BRIEF DESCRIPTION OF COMPONENTS:
1) Transformer:-
A transformer is a static device which consists of two or more stationary circuits interlinked by a common magnetic circuit for the purpose of transferring electrical energy between them.
• E.M.F equation of a transformer:
e=4.44Baft
B=maximum flux density in the magnetic circuit.
a=area of cross-section of the core.
f and t are frequency and no. of turns respectively.
• Step up and step down transformer:
A step up transformer is one whose secondary voltag ....etc

[:=Read Full Message Here=:]

hi .im naam m kya rakha ...h.yaaar....i just want to make a project report on zener diode ...and will goona help me...maa ki.ank ....etc

[:=Read Full Message Here=:]

I would like to show me example of work break down structure for thermal power project ....etc

[:=Read Full Message Here=:]

This article is presented by:
DHARAM VIR
Master of Technology in Electrical Engineering
YMCA INSTITUTE OF ENGINEERING, FARIDABAD
JULY 2009


Analytical Analysis of Double Implanted MOSFET for High Breakdown & Low Power Dissipation using Graded Profile on 6H-SiC Wafer

Objectives of Thesis:

The main objectives of this work were as follows:
Analysis of Double Implanted MOSFET on 6H SiC wafer using uniform doping profile.
Deter ....etc

[:=Read Full Message Here=:]

An Introduction to Total Productive Maintenance (TPM)

By Venkatesh J
What is Total Productive Maintenance ( TPM ) ?
It can be considered as the medical science of machines. Total Productive Maintenance (TPM) is a maintenance program which involves a newly defined concept for maintaining plants and equipment. The goal of the TPM program is to markedly increase production while, at the same time, increasing employee morale and job satisfaction.
TPM brings maintenance into focus as a necessary and vitally important part of the busin ....etc

[:=Read Full Message Here=:]

PILLAR 1 - 5S :
TPM starts with 5S. Problems cannot be clearly seen when the work place is unorganized. Cleaning and organizing the workplace helps the team to uncover problems. Making problems visible is the first step of improvement.
Japanese Term
English Translation
Equivalent 'S' term
Seiri
Organisation
Sort
Seiton
Tidiness
Systematise
Seiso
Cleaning
Sweep
Seiketsu
Standardisation
Standardise
Shitsuke
Discipline
Self - Discipline
SEIRI - Sort out :
This means sorting and organizing the items as critical, important, fre ....etc

[:=Read Full Message Here=:]

WORK BREAKDOWN STRUCTURES.
COST ESTIMATION TECHNIQUES Expert judgment . Delphi cost method. WBS Algorithmic method WBS. It is a bottom-up estimation tool. It is a hierarchical chart that accounts for the individual parts of a system. This chart can indicate either product hierarchy or process hierarchy. It identifies the product components and indicates the manner in which the components are interconnected. It describes the fundamental structure of the software, showing how the various software components fit into the overall system. PRODUCT H ....etc

[:=Read Full Message Here=:]

The history of semiconductor devices starts in 1930?s when Lienfed and Heil first proposed the mosfet. However it took 30 years before this idea was applied to functioning devices to be used in practical applications, and up to the late 1980 this trend took a turn when MOS technology caught up and there was a cross over between bipolar and MOS share.CMOS was finding more wide spread use due to its low power dissipation, high packing density and simple design, such that by 1990 CMOS covered more than 90% of total MOS scale. In 1983 bipolar compa ....etc

[:=Read Full Message Here=:]