1. INTRODUCTION
Technological advances are reshaping the face of manufacturing, creating paperless manufacturing environments in which computer automated process planning (CAPP) will play a preeminent role. The two reasons for this effect are: Costs are declining, which encourages partnerships between CAD and CAPP developers and access to manufacturing data is becoming easier to accomplish in multivendor environments. This is primarily due to increasing use of LANs; IGES and the like are facilitating tra ....etc

[:=Read Full Message Here=:]

Sensitive skin is a large-area, flexible array of sensors with data processing capabilities, which can be used to cover the entire surface of a machine or even a part of a human body. Depending on the skin electronics, it endows its carrier with an ability to sense its surroundings via the skinâ„¢s proximity, touch, pressure, temperature, chemical/biological, or other sensors. Sensitive skin devices will make possible the use of unsupervised machines operating in unstructured, unpredictable surroundings among people, among many obstacles, o ....etc

[:=Read Full Message Here=:]

MANUFACTURING THROUGH ELECTRO CHEMICAL MACHINING




ABSTRACT:

The machining of complex shaped designs was difficult earlier, but with the advent of the new machining processes incorporating in it chemical, electrical & mechanical processes manufacturing has redefined itself. This paper intends to deal with one of the revolutionary process called Electro Chemical Machining (ECM).

INTRODUCTION:

Electro chemical machining (ECM) is the controlled removal of metal ....etc

[:=Read Full Message Here=:]

HIGH SPEED MACHINING
ABSTRACT
Over the past 60 years, high speed machining (HSM) has been applied to a wide range of metallic and non-metallic work piece materials including the production of components with specific topography requirements and machining of materials with hardness of 50 HRC and above.
With most steel components hardened to approximately 32-42 HRC, machining operations currently include:
Rough machining and semi-finishing of the material
Heat treatment to ach ....etc

[:=Read Full Message Here=:]

CHAPTER 1: INTRODUCTION
Here is an inexpensive auto cut-off circuit, which is fabricated using transistor and other discrete components. It can be used to protect loads such as refrigerator, T.V., and VCR from undesirable over and under line voltages, as well as surges caused due to sudden failure/resumption of main power supply. This circuit can be used directly as a standalone circuit between the mains supply and the load, or it may be inserted between an existing automatic/manual stabilizer and the load.
The over/u ....etc

[:=Read Full Message Here=:]

163/2014
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.Which is not a primary colour in printing?
(A)Green
(B) Yellow
(C ) Cyan
(D) Magenta

2.At what depth will he a photograph measuring 16cm* 20cm is to be reduced to 10 cm width?
(A)5.12 cm
(B) 50.2 cm
(C ) 12.5 cm
(D) 15.2 cm

3.Name the process that the size of an image will be reduced or enlarged to fit at a particular area of the layout:
(A)Trapping
(B)Scaling
(C )Leaching
(D)Fitting

4.The machine which is used to arrange the sections of a ....etc

[:=Read Full Message Here=:]

Aluminum Electrolytic Capacitors

Aluminium electrolytic capacitors are widely used in power supply circuitry of electronic equipment as there after several advantages over other types of capacitances. The selection of a capacitor for an application without knowing the basics may result in unreliable performance of the equipment due to expanitor problems. It may lead to customer dissatisfaction and damage market to potential or the image of a reputed company. The aluminium eletrolytic capacitors are suitable to be used when a great capacitanc ....etc

[:=Read Full Message Here=:]

Presented by:
Shaikh Rizwaan
Aabed Khan


ADVANCED FINE FINISHING PROCESSES
Abstract:
The technology is really spice of life. This seminar is all about latest technology which is useful for finishing materials with very high precision. These are the latest processes are called as Advanced Fine Finishing Processes. In this seminar we are going to take a overlook on some of these processes.
With the demand of stringent technological and functional requirements of the parts from micro- to nano-meter ran ....etc

[:=Read Full Message Here=:]

Abstract
Rapid Prototyping Technology is a group of manufacturing processes that enable the direct physical realization of 3D computer models. This technology converts the 3D computer data provided by a dedicated file format directly to a physical model, layer by layer with a high degree of accuracy. This technology is fast developing and is more than
competitive to traditional model building techniques considering time and degree of detail. The paper gives an overview on existing major RP techniques an ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining

Introduction
The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.

CLASSIFICATION
1. Contact initiated dischar ....etc

[:=Read Full Message Here=:]