Abstract
In this review, the primary FinFET framework is described, along with the reasons behind its release. The production actions are temporarily described. Lastly, some latest perform on FinFETs is provided, along with the excellent problems that individuals have been concentrating on.
Introduction
As gadgets get smaller further and further, the problems with traditional (planar) MOSFETs are improving. Market is currently at the 90nm node (ie. DRAM 50 percent steel message, which matches to checkpoint measures o ....etc

[:=Read Full Message Here=:]

nanofluids and their potential application in automobiles as thermal coolants

....etc

[:=Read Full Message Here=:]

Silicon photonics can be defined as the utilization of silicon-based materials for the generation (electrical-to-optical conversion), guidance, control, and detection (optical-to-electrical conversion) of light to communicate information over distance.

The most advanced extension of this concept is to have a comprehensive set of optical and electronic functions available to the designer as monolithically integrated building blocks upon a single silicon substrate.


Within the range of fibre optic telecommunication wavelength (1.3 ?m to ....etc

[:=Read Full Message Here=:]

NANOFLUIDS FOR HIGH PERFORMANCE COOLING SYSTEM
ABSTRACT
Downscaling or miniaturization has been a recent major trend in modern science and technology. Engineers now fabricate microscale devices such as micro channel heat exchangers, and micro pumps that are the size of dust specks. Further major advances would be obtained if the coolant flowing in the micro channels were to contain nanoscale particles to enhance heat transfer. Nanofluid technology will thus be an emerging and exciting technology of the 21stcentury. This paper gives a brief ....etc

[:=Read Full Message Here=:]

Nanofluids:
Wet-Nanotechnology:nanofluidsat NIUin collaboration with ANL

First NIU Nanofluids
Dry- vs. Wet-nanotechnology
Fluids (gases & liquids) vs. Solidsin Nature and (Chemical & Bio) Industry
More degree of freedoms “ more opportunities¦(also more challenges)
Nanofluids: nanoparticles in base fluids
* Understanding nano-scale particle-fluid interactions  in physical-, chemical-, and bio-processes, and engineering new/enhanced functional products
Directed self-assembly:* st ....etc

[:=Read Full Message Here=:]

ABSTRACT
In the present world, the display technology is usually analog. But, we present the future technology i.e., the digital technology. The analog display technologies limit the full potential of digital video. So, the digital display devices will be in the market soon. In our paper, we emphasize on Digital Light Processing (DLP). This DLP display technology manipulates the light digitally to produce all-digital images. This technology reproduces color images with precision accuracy in a seamless fashion. The picture ap ....etc

[:=Read Full Message Here=:]

POLY JET PROCESS

PRESENTED BY
K.SRI RAM VIKAS
V.S.R.KISHORE.B
D.M.S S.VH COLLEGE OF ENGINEERING, Machilipatnam, AP- 521002


Different types of RP methods

The Poly jet process
Stereo lithography (SLA for stereo lithography apparatus),
Selective laser sintering (SLS),
Fused deposition modeling (FDM),
Laminated object manufacturing (LOM),
Inkjet systems and three dimensional printing (3DP).
Solid Ground Curing


Rapid prototyping is a layer -based fabrication that quickly create ....etc

[:=Read Full Message Here=:]

Nanofluids:
Wet-Nanotechnology:nanofluidsat NIUin collaboration with ANL

First NIU Nanofluids
Dry- vs. Wet-nanotechnology
Fluids (gases & liquids) vs. Solidsin Nature and (Chemical & Bio) Industry
More degree of freedoms “ more opportunities¦(also more challenges)
Nanofluids: nanoparticles in base fluids
* Understanding nano-scale particle-fluid interactions  in physical-, chemical-, and bio-processes, and engineering new/enhanced functional products
Directed self-assembly:* st ....etc

[:=Read Full Message Here=:]

Poly Fuse

Polyfuse is a new standard for circuit protection. It is resettable. Many manufacturers also call it polyswitch or multifuse. Polyfuses are not fuses but polymeric positive temperature co-efficient (PPTC) thermistors.

Current limiting can be accomplished by using resistors , fuses , switches or positive temperature co-efficient devices. Resistors are rarely an acceptable solution because the high power resistors that are usually required are expensive. One-shot fuses can be used, but they might fatigue, and they must be replaced ....etc

[:=Read Full Message Here=:]

Polyfuses is a new standard for circuit protection. It is re-settable by itself. Many manufactures also call it as Polyswitch or Multifuse. Polyfuses are not fuses but Polymeric Positive temperature Coefficient Thermistors (PPTC). We can use several circuit protection schemes in 'power supplies to provide protection against fault condition and the resultant and over temperature damage. Current can be accomplished by using resistors, fuses, switches, circuit breakers or positive temperature coefficient devices.Resistors are rarely an acceptable ....etc

[:=Read Full Message Here=:]

ABSTRACT

The plastic substrates are thinner, lighter, shatterproof, flexible, rollable and foldable, making Silicon-on-Plastic an enabling technology for new applications/products. This paper studies the development of Silicon on Plastic technology. Advances in poly-silicon technology have expanded TFT (THIN FILM TRANSISTORS) technology to high-speed electronics applications such as Smart Cards, RFID tags, portable imaging devices, photo-voltaic devices and solid-state lighting and other integr ....etc

[:=Read Full Message Here=:]

application of nanofluids
can it use for cooling tower ? ....etc

[:=Read Full Message Here=:]

Abstract
Organic thin-film transistors OTFTs have received considerable attention recently because they can be fabricated at reduced temperature and potentially reduced cost compared to hydrogenated amorphous silicon thin-film transistors. Low fabrication temperature allows a wide range of substrate possibilities and makes OTFTs an attractive technology for many low-cost electronics applications, particularly those that require or may benefit from flexible polymeric substrates such as rf identification tags, smart cards ....etc

[:=Read Full Message Here=:]

1. INTRODUCTION
The history of semiconductor devices starts in 1930â„¢s when Lienfed and Heil first proposed the mosfet. However it took 30 years before this idea was applied to functioning devices to be used in practical applications, and up to the late 1980 this trend took a turn when MOS technology caught up and there was a cross over between bipolar and MOS share.CMOS was finding more wide spread use due to its low power dissipation, high packing density and simple design, such that by 1990 CMOS ....etc

[:=Read Full Message Here=:]

NANOFLUIDS FOR HIGH PERFORMANCE COOLING SYSTEM
ABSTRACT
Downscaling or miniaturization has been a recent major trend in modern science and technology. Engineers now fabricate microscale devices such as micro channel heat exchangers, and micro pumps that are the size of dust specks. Further major advances would be obtained if the coolant flowing in the micro channels were to contain nanoscale particles to enhance heat transfer. Nanofluid technology will thus be an emerging and exciting technology of the 21stcentury. This paper gives a brief ....etc

[:=Read Full Message Here=:]

The history of semiconductor devices starts in 1930?s when Lienfed and Heil first proposed the mosfet. However it took 30 years before this idea was applied to functioning devices to be used in practical applications, and up to the late 1980 this trend took a turn when MOS technology caught up and there was a cross over between bipolar and MOS share.CMOS was finding more wide spread use due to its low power dissipation, high packing density and simple design, such that by 1990 CMOS covered more than 90% of total MOS scale. In 1983 bipolar compa ....etc

[:=Read Full Message Here=:]

Prepared by:
Stephen U.-S. Choi



ABSTRACT

Downscaling or miniaturization has been a recent major trend in modern science and technology. Engineers now fabricate microscale devices such as microchannel heat exchangers, and micropumps that are the size of dust specks. Further major advances would be obtained if the coolant flowing in the microchannels were to contain nanoscale particles to enhance heat transfer. Nanofh.dd technology will thus be an emerging and exciting technology of the 21st century.
This paper gives a brie ....etc

[:=Read Full Message Here=:]