The best optical microscopes can see structures in the 200 – 400 nm range, at their limits of resolution.
The STM can “see” structures on the order of 0.1 nm —another SPM, the AFM—can distinguish things on the order of 100 nm .
Optical microscopes are “diffraction limited”—the wavelength range of visible light (400-750 nm) sets the size of the smallest thing that can be imaged: ~ 400 nm.
Scanning Probe Microscopes don’t use visible light—they depend on measuring intermolecular ....etc

[:=Read Full Message Here=:]

AQUARIUM PROBE


ASHES T KULAMACKAL
RENJU CHACKO VARKEY
TOBIN JOHN VARGESE
Under the guidance of
Ms.Laghima
Senior Lecturer in Electronics & Communication Engineering
College of Engineering, Chengannur


ABSTRACT
In Aquariums ,constant monitoring of temperature by humans is a tedious process.Similarly the amount of dissolved solvents in water th. The circuit of aquatic probe described here can monitor the temperature of water and correct the variation in t ....etc

[:=Read Full Message Here=:]

AQUARIUM AUTOMATION


Fishes are very sensitive to changes in temperature & surround lighting. In this
project we maintain the temperature of the aquarium, the time at which the lights
should be turned ON/OFF & the duration of oxygen motor. For this three relays are
required one each for heater (temperature control), light & the Oxygen Motor. LM 35
is used as the temperature sensor for sensing the waters temperature, ADC 0808 is
used to convert the LM 35’s output into digital val ....etc

[:=Read Full Message Here=:]

My name is supritha. I am final year b.e student. I want the source code for network probe using rmi. I have to complete this project urgently. so kindly mail me the source code ....etc

[:=Read Full Message Here=:]

Background
• Magnetic and optical recording technologies are used for nonvolatile data storage. These technologies are reaching limit of data recording density of 500 Gb/in2 and 100 Gb/in2, respectively.
• Battle: Flash vs. hard drives
....etc

[:=Read Full Message Here=:]

Network Probe using RMI


ABSTRACT

This Project is mainly focused on finding different active nodes connected on the network
And to perform different remote operations. The modules in this project are
1. Analyzing the network.
2. Remote task execution.
3. Remote Java properties
4. Host task Executor
5. Checking Remote Platform
6. Shutdown Remote Node
7. Adding New Nodes

Before proceeding operation in the remote network. It is necessary to add node name to the system using Add Nodes module. Once it is ....etc

[:=Read Full Message Here=:]

Characterization of radio frequency plasma using Langmuir probe
and optical emission spectroscopy
M. Nisha, K. J. Saji, R. S. Ajimsha, N. V. Joshy, and M. K. Jayaraj
a
Optoelectronics Devices Laboratory, Department of Physics, Cochin University of Science
and Technology, Kochi-682 022, Kerala, India
Received 21 February 2005; accepted 4 January 2006; published online 15 February 2006
The radio frequency plasma generated during the sputtering of Indium Tin Oxide target using Argon
was analyzed by Langmuir probe and optical-emission spec ....etc

[:=Read Full Message Here=:]

i request you to send the report and source code for computer graphics mini project on aquriu it is too urgent.......

....etc

[:=Read Full Message Here=:]

ABSTRACT

Existing SoC debug techniques mainly target bus-based systems. They are not readily applicable to the emerging system that use Network-on-Chip (NoC) as on-chip communication scheme. In this paper, we present the detailed design of a novel debug probe (DP) inserted between the core under debug (CUD) and the NoC. With embedded configurable triggers, delay control and time stamping mechanism, the proposed DP is very effective for inter-core transaction analysis as well as controlling embedded cores' debug processes. Experimental result ....etc

[:=Read Full Message Here=:]

hi,i want Terminal controller for network probe, usin RMI,project ,plz if we have this project plz send,thank you ....etc

[:=Read Full Message Here=:]