Quick Installation Guide


Installing COMSOL 4.1 on Linux
1 You may need root privileges to install COMSOL in a system directory. You
may also need root privileges to mount the DVD.
2 The COMSOL installer is an X-windows application so you need to be logged
in with access to an X-windows display.
3 Insert the COMSOL 4.1 DVD into the DVD drive. If the DVD is not
mounted automatically by your operating system, use the mount command to
mount the DVD.
4 To start th ....etc

[:=Read Full Message Here=:]

I begin to use the comsol bofore two days, and I need some help for using comsol to simulate the solar cell,such as how to set the model of solar cell ,and so on ....etc

[:=Read Full Message Here=:]

Seminar Report
WITRICITY
ABSTRACT
The technology used for wireless power transmission is known as witricity. Wireless power transmission is not a new idea, Nikola Tesla proposed theories of wireless power transmission in the late 1800s and early 1900s. Tesla's work was impressive, but it did not immediately lead to wide spread practical methods for wireless power transmission. Since then many researchers have developed several techniques for moving electricity over long distances without wires. Some exist only as theori ....etc

[:=Read Full Message Here=:]

Under the Guidance of Dr. Patil Basavaraj VDept of IP & E
Submitted By Deepak Kothari

Introduction to CWR

The CWR is a rotary forming process, consists
of the forming of forging by means of wedge-shaped tools that are fixed on the mill rolls with the same rotary direction.
In CWR process, there are five stages in the work piece deformation process corresponding to five zones of the wedged tool geometry, i.e., knifing, guiding, stretching, shaping, and siz ....etc

[:=Read Full Message Here=:]

I begin to use the comsol bofore two days, and I need some help for using comsol to simulate the solar cell,such as how to set the model of solar cell ,and so on ....etc

[:=Read Full Message Here=:]

Nonlinear Piezolectric Generators

presenterd by:
Francesco Cottone



Outline
Introduction: mobile powering issues

Present Vibration Piezoelectric Power Generators

Non-linear piezo-osclillator models
numerical result (Matlab)
finite elements modelling of linear and non-linear oscillators (Comsol)

Conclusions and forthcoming work



Applications examples of WSN
Environmental Monitoring
Habitat Monitoring
Integrated Biology
Structural Monitoring
Interactive and Control
RFID
Medical bi ....etc

[:=Read Full Message Here=:]

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGG.

KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENT
KURUKSHETRA- 136119



Microelectromechanical systems
Microelectromechanical systems (MEMS) (also written as micro-electro-mechanical, MicroElectroMechanical or microelectronic and microelectromechanical systems) is the technology of very small mechanical devices driven by electricity; it merges at the nano-scale into nanoelectromechanical systems (NEMS) and nanote ....etc

[:=Read Full Message Here=:]

How to construct a low cost houses
New invention about this ....etc

[:=Read Full Message Here=:]

Under the Guidance of Dr. Patil Basavaraj VDept of IP & E
Submitted By Deepak Kothari

Introduction to CWR

The CWR is a rotary forming process, consists
of the forming of forging by means of wedge-shaped tools that are fixed on the mill rolls with the same rotary direction.
In CWR process, there are five stages in the work piece deformation process corresponding to five zones of the wedged tool geometry, i.e., knifing, guiding, stretching, shaping, and siz ....etc

[:=Read Full Message Here=:]

Non-Linear Analysis and Design of Perforated Thin-walled Steel Strutures

Introduction
Perforated thin-walled steel structures are widely used, however, current design guidelines for them are limited to very few specific cases.
The seminar will try to describe a proposed method to develop new design guidelines for this kind of structures by using the Direct Strength Method (DSM) which is a fast and easy design method for cold-formed steel structures, with great potential for complex and optimized cross sections.

Based on the recently de ....etc

[:=Read Full Message Here=:]