Corrosion of reinforcements has been one of the major challenges that the civil engineers have been facing. Corrosion leads to the formation of rust which results in the spalling of concrete which in turn leads to the exposure of rebars to the aggressive environment. This will accelerate the ill effects and ultimately leads to the break down of the structure. Corrosion mainly occurs in areas of aggressive environment such as coastal regions. It is very important that corrosion of reinforcement must be prevented in order to have a durable struct ....etc

[:=Read Full Message Here=:]

Deterioration of reinforced concrete structures due to corrosion of steel is a cause of global concern. The losses due to corrosion every year run into millions of rupees and any solution to this universal problem of corrosion has a direct bearing economy of the country. It is estimated that about 30-40 percent of steel produced each year is used to replace corroded material.
In recent years, the construction industry has seen an increased demand to reinstate, rejuvenate, strengthen and upgrade existing concrete structures. This may be attrib ....etc

[:=Read Full Message Here=:]

corrosion
The process of decay of metal by environmental attack is called corrosion.
The basic reason for this attack is most of the metals (except Pt, Au, Ag) exist in nature in the form of their ores as oxides, chlorides, silicates, carbonates etc.,
Metals have the natural tendency to go back to their combined states, as a result when metal is exposed environmental conditions forms stable compounds of metals, known as corrosion.
The process of corrosion is reverse of metal extraction.
Effects of ....etc

[:=Read Full Message Here=:]

Rehabilitation And Repairs Of Corrosion Distressed Structures By Composite Fibre Wrapping And Electrochemical Techniques

Deterioration of reinforced concrete structures due to corrosion of steel is a cause of global concern. The losses due to corrosion every year run into millions of rupees and any solution to this universal problem of corrosion has a direct bearing economy of the country. It is estimated that about 30-40 percent of steel produced each year is used to replace corroded material.
In recent years, the construction industry ha ....etc

[:=Read Full Message Here=:]

Presented by:
S.KAVITHA


Strengthening Of CorrosionInflicted RC Beams Using FRP Wrap
Objective
The loss of stiffness caused by corrosion regained by FRP application
Confine concrete and improve the compressive strength
Decreased corrosion rates due to FRP application
Substantial increase in the ultimate strength
Stress-strain curves for FRP products
Properties of FRP composites
Corrosion damage of a concrete beam
Methodology
Experimental programme
Corrosion infliction
Process of inducing c ....etc

[:=Read Full Message Here=:]

hello sir,
i m patil ajay from coe osmanabad
i m interseted in above sub
so , pls send me detail report on above mention sub
....etc

[:=Read Full Message Here=:]

ABSTRACT

Detection of corrosion damage in aircraft wing skin structures is an ongoing NDT challenge. Ultrasonic methods are known and well-accepted techniques, which are relatively simple to carry out in terms of setup, probes and instrumentation and operator training. However, with conventional inspection from the top surface using a transducer at normal incidence (0o to the normal to the surface) producing a visual picture in the form of a C-scan, it is very tie consuming to point-by-point inspects large aircraft wing skin areas. I ....etc

[:=Read Full Message Here=:]

Detection of corrosion damage in aircraft wing skin structures is an ongoing NDT challenge. Ultrasonic methods are known and well-accepted techniques, which are relatively simple to carry out in terms of setup, probes and instrumentation and operator training. However, with conventional inspection from the top surface using a transducer at normal incidence (0o to the normal to the surface) producing a visual picture in the form of a C-scan, it is very tie consuming to point-by-point inspects large aircraft wing skin areas. In addition it is too ....etc

[:=Read Full Message Here=:]

Corrosion of reinforcements has been one of the major challenges that the civil engineers have been facing. Corrosion leads to the formation of rust which results in the spalling of concrete which in turn leads to the exposure of rebars to the aggressive environment. This will accelerate the ill effects and ultimately leads to the break down of the structure. Corrosion mainly occurs in areas of aggressive environment such as coastal regions. It is very important that corrosion of reinforcement must be prevented in order to have a durable struct ....etc

[:=Read Full Message Here=:]

Presented By:
Jeremy E. Scheel
Paul S. Prevéy III and Douglas J. Hornbach
Lambda Research

ABSTRACT

Corrosion, Stress Corrosion Cracking (SCC) and corrosion fatigue failures of high strength aircraft aluminums are costly and potentially catastrophic material problems affecting the aircraft fleet today. As the service lives of aircraft are extended, the increasing inspection and repair of corrosion in aging aircraft adversely affects fleet readiness, the cost of operation, and personnel safety. Shot peening (SP) is a wid ....etc

[:=Read Full Message Here=:]