In this era of increasing fuel prices, here a device called ËœFUEL ENERGIZERâ„¢ help us to Reduce Petrol /Diesel /Cooking gas consumption up to 28%, or in other words this would equal to buying the fuel up to 28% cheaper prices. When fuel flow through powerful magnetic field created by Magnetizer Fuel Energizer, the hydrocarbons change their orientation and molecules in them change their configuration. At the same time inter molecular forces is considerably reduced or depressed hence oil particles are finely divided. This has the effect o ....etc

[:=Read Full Message Here=:]

In this era of increasing fuel prices, here a device called ËœFUEL ENERGIZERâ„¢ help us to Reduce Petrol /Diesel /Cooking gas consumption up to 28%, or in other words this would equal to buying the fuel up to 28% cheaper prices. When fuel flow through powerful magnetic field created by Magnetizer Fuel Energizer, the hydrocarbons change their orientation and molecules in them change their configuration. At the same time inter molecular forces is considerably reduced or depressed hence oil particles are finely divided. This has the effect o ....etc

[:=Read Full Message Here=:]

Role of enzymes in arsenite tolerance in bacterial isolate Wng-1
A project report submitted for the partial fulfillment of Master of Science in Biotechnology
Submitted by:
Sanjay Kumar 07-BT-09
Department of Biotechnology University of Pune Pune-411007
Under the guidance of:
Dr. W. N. Gade
Prof. and Head Department of Biotechnology University of Pune Pune-411007
INTRODUCTION:
Bacteria are simple cells with simple organization of cellular structure and limited compartmentalization as compared to eukaryotes. They are found in ve ....etc

[:=Read Full Message Here=:]

i am vijay bhaskar reddy i want full pdf of my topic named as Screening for Toxic Nanoparticles i am searching for pdf but iam not getting that ....etc

[:=Read Full Message Here=:]

Submitted by,
B.SATHYAPAL SHAJEE
G.JEGADEESWARAN


Being in an era of technology, it is a well known fact that every one(either technical or non-technical people)tries to learn about technological developments, the operation of technological products & their applications. Further most of the engineers & research people concentrate on further developing existing technology. Everyone seems to be in a singing mood about technology.
But be alert, ....etc

[:=Read Full Message Here=:]

agricultural waste materials as useful adsorbent be remove highly toxic




MATERIALS AND METHODS
Effects of adsorption on different agricultural waste materials were studied given as follows:-
1. Coconut shell
2. Waste tea leaves
3. Rice husk

I. Collection of agricultural waste materials:
The agricultural waste materials used for our adsorption studies are
1. Waste tea leaves were collected from the kitchen waste.
2. Coconut shell also coll ....etc

[:=Read Full Message Here=:]

DETERMINING THE CRITERIA FOR
EVALUATION OF TOXIC HAZARDS
SREERAJ R NAIR
PRINCIPAL ENGINEER
CONSULTANCY SERVICES
AKER SOLUTIONS, UK
Email “ [email protected]
Introduction
Industries handling dangerous materials continuously
identify hazards and manage risk. One of the major
hazards in process or manufacturing industry is the
release of toxic chemicals. The hazard arising from a
toxic release depends on the toxicity of the chemical
and the conditions of exposure. The effects from the
exposure to toxic release c ....etc

[:=Read Full Message Here=:]

CHAPTER-1
STRESS TENSOR

INTRODUCTION:
Two planes from infinitesimal distance away and parallel to each other were made to pass through the body, an elementary slice would be isolated. Then, if an additional two pairs of planes were passed normal to the first pair, a cube of infinitesimal dimensions would be isolated from the body. Such a cube is as shown in the Fig.1.1 (a). On the near faces of the cube, i.e., on the faces away from the origin, the directions of stres ....etc

[:=Read Full Message Here=:]

Introduction:
Household items made of various kinds of plastic.
Plastic is the general common term for a wide range of synthetic or semisynthetic organic amorphous solid materials used in the manufacture of industrial products. Plastics are typically polymers of high molecular mass, and may contain other substances to improve performance and/or reduce costs. Monomers of Plastic are either natural or synthetic organic compounds.
The word is derived from the Greek past (plastikos) meaning fit for molding, and past ....etc

[:=Read Full Message Here=:]

ABSTRACT
In this era of increasing fuel prices, here a device called ?FUEL ENERGIZER? help us to Reduce Petrol /Diesel /Cooking gas consumption up to 28%, or in other words this would equal to buying the fuel up to 28% cheaper prices.
When fuel flow through powerful magnetic field created by Magnetizer Fuel Energizer, The hydrocarbons change their orientation and molecules in them change their configuration. Result: Molecules get realigned, and actively into locked with oxygen during combustion to produce a near complete burning of fuel in co ....etc

[:=Read Full Message Here=:]

ABSTRACT
In this era of increasing fuel prices, here a device called ?FUEL ENERGIZER? help us to Reduce Petrol /Diesel /Cooking gas consumption up to 28%, or in other words this would equal to buying the fuel up to 28% cheaper prices.
When fuel flow through powerful magnetic field created by Magnetizer Fuel Energizer, The hydrocarbons change their orientation and molecules in them change their configuration. Result: Molecules get realigned, and actively into locked with oxygen during combustion to produce a near complete burning of fuel in co ....etc

[:=Read Full Message Here=:]

DETERMINING THE CRITERIA FOR
EVALUATION OF TOXIC HAZARDS
SREERAJ R NAIR
PRINCIPAL ENGINEER
CONSULTANCY SERVICES
AKER SOLUTIONS, UK
Email “ [email protected]
Introduction
Industries handling dangerous materials continuously
identify hazards and manage risk. One of the major
hazards in process or manufacturing industry is the
release of toxic chemicals. The hazard arising from a
toxic release depends on the toxicity of the chemical
and the conditions of exposure. The effects from the
exposure to toxic release c ....etc

[:=Read Full Message Here=:]

E-WASTE MANAGEMENT
SEMINAR REPORT
Submitted by
BINDU V.GOPAL
DEPARTMENT OF CIVIL ENGINEERING
COLLEGE OF ENGINEERING TRIVANDRUM


ABSTRACT


The electronic industry is the world’s largest and fastest growing manufacturing industry in the world. Discarded electronic and electrical equipment with all of their peripherals at the end of life is termed e-waste. The quantity of e-waste generated in developed countries equals 1% of total solidwaste on an average and is expected to grow to 2% by 2010 and i ....etc

[:=Read Full Message Here=:]