CHAPTER 1
INTRODUCTION
Surveillance, Espionage or spying involves individual obtaining information that is considered secret or confidential without the permission of the holder of the information. Spying area in military ground where enemy stay can be took before taking any action.
A robot is a virtual or mechanical artificial agent. In practice, it is usually an electro mechanical system which, by its appearance or movements, conveys a sense that it has intent or agency of its own.
Our aim in building this projec ....etc

[:=Read Full Message Here=:]

need ppt of design and implementation of home embedded surveillance system
....etc

[:=Read Full Message Here=:]

A Surveillance Robot with Hopping Capabilities for Home Security


Abstract —
Most traditional home robots have always had problems with stairs, doorsills and other
obstacles that humans cross with ease in cluttered indoor environments. This paper
presents the development and characterization of a surveillance robot with hopping
capabilities for home security. The proposed robot can leap over obstacles. It can also roll
freely on flat floors and change its directions by the two-wheeled differential drive
system. It adop ....etc

[:=Read Full Message Here=:]

Multiple access (MA) schemes are used to simultaneously share available bandwidth in communication systems. In conventional MA applications a finite and contiguous amount of spectrum which is designated for a particular service is allocated to multiple users. Therefore, the use of designated radio spectrum is unconstrained and can be utilized in many ways to achieve maximum efficiency. Time division multiple access (TDMA), frequency division multiple access (FDMA), and code division multiple access (CDMA) are the three major MA techniques. In ....etc

[:=Read Full Message Here=:]

I need the project report for gsm based home security system
and also the ppt for it.can u plz send it.........my mail is [email protected] ....etc

[:=Read Full Message Here=:]

Abstract
Laser assisted direct metal deposition refers to the additive layered manufacturing technology for building components from a
computer-aided design CAD. model. A motion control program, developed from the CAD model of a desired metal component,
is used to control the motion of a laser focal spot to trace all areas of the part, typically a planar layer at a time. Metal powders,
injected into the laser focal zone, are melted and then re-solidify into fully dense metal in the wake of the moving molten pool
created by the las ....etc

[:=Read Full Message Here=:]

Multiple access (MA) schemes are used to simultaneously share available bandwidth in communication systems. In conventional MA applications a finite and contiguous amount of spectrum which is designated for a particular service is allocated to multiple users. Therefore, the use of designated radio spectrum is unconstrained and can be utilized in many ways to achieve maximum efficiency. Time division multiple access (TDMA), frequency division multiple access (FDMA), and code division multiple access (CDMA) are the three major MA techniques. In r ....etc

[:=Read Full Message Here=:]

im cse student .i want ppt of humanoid robot used for surveillance ....etc

[:=Read Full Message Here=:]

1. mobile phone operated robot
2. hii iam vikas from rait, just completed my BE
3. this technology uses dtf technology for operating robot. which are generated by mobile phone.


ABSTRACT




A relatively new research direction in mobile robotics concerns the communication technology for the control mobile robots in connection with other devices or between a team of mobile robots. This paper describes an approach for the remote control of a mobile robot using DTMF communication.

Aspects regarding DTMF technology, architectu ....etc

[:=Read Full Message Here=:]

A High Data Rate Frequency Hopping Modulation Scheme
Theme:ECE/Digital Communications

Submited By:
Hemanth Patnala
R.V.Seshu Kumar
Sir C.R.R. College Of Engineering,
Eluru-534002
ABSTRACT
There is a need to select the 'first step up' modulation scheme for higher data rate frequency hopping systems. This is seen as one step in a longer journey where considerably higher data rates are used. In order to make this progression viable, the first step should be taken with a well proven modulation scheme. An ....etc

[:=Read Full Message Here=:]