MAGNETIC LEVITATION SYSTEM
plant consists of an electromagnet, an optic position sensor, a
ferromagnetic sphere and a power interface.
Due to the spherical shape the measurement is nonlinear and needs
to be electronically or digitally linearised.

Velocity estimation
For fast nonlinear and unstable dynamical systems, such as magnetic
levitation, high quality of control is essential.
The ball velocity measurement is a dicult task.
Measurements of position and current is used for the velocity
estimatio ....etc

[:=Read Full Message Here=:]

AUTOMOBILE EMISSIONS CONTROL AND MONITORING BY MONOPOLE MAGNETIC DEVICE AND REMOTE SENSING TECHNOLOGY
Abstract
Monopole magnetic device and Remote Sensing Technology (RST) are used to monitor and control automobile emissions to prevent the pollution and protect the environment. Monopole magnetic device reduces the level of noxious gases in exhaust fumes of vehicles. The carbon monoxide (co) level is reduced almost zero in the vehicles. It also claims a substational reduction in hydrocarbon emission in all the vehicles. T ....etc

[:=Read Full Message Here=:]

1. INTRODUCTION
In recent years, micro-devices intended to drive in the living body have been developed. These robotic agents, as capsule endoscopes, are expected to develop new medical treatments. However, these systems could function only to whole of an organ and a cell but not to the smaller one as a intracellular region because of its hugeness. On the other hand, in medical field, it has been revealed that organelles are in intracellular regions and which has important function related with the cell activity. Thu ....etc

[:=Read Full Message Here=:]

Dear sir,
a private is going to come for campus recruitment in our college for which they are expecting us to mke a presentation on automobile emission control. so i am in need of this paper. so i kindly request you to provide me with this paper.
....etc

[:=Read Full Message Here=:]

A magnetic amplifier is a device which controls the power delivered from an a.c. source by employing a controllable non linear reactive elements or circuit generally interposed in series with the load. The power required to control the reactive element or circuit is made for less than the amount of power controlled; and hence power amplification is achieved. The non-linear reactive element is a saturable reactor. When used in a combination with a set of high-grade rectifiers, it exhibits power amplification properties in the sense that small ch ....etc

[:=Read Full Message Here=:]

Abstract

Closed-loop servo control of a DC motor and load system using tachometer feedback is a very common industrial and research application. In the presence of finite shaft stiffness, this exercise becomes involved since flexibility introduces resonance and shaft ringing. To be able to model, predict, and eliminate these high-frequency resonance problems by means of an appropriate controller design, it is essential to have an accurate model for the entire drive system, including the tachometer.

The conventional tachometer model does n ....etc

[:=Read Full Message Here=:]

It is not often that scientific discoveries hold the promise of saving consumer?s money while protecting the environment and reducing the use of fossil fuels. Define the perfect fuel and it would most lightly be one that burns cleanly, poses no harm to the environment and, above all, is renewable or in limitless supply.

The researchers in the U.S Department of Energy?s Ames Laboratory under a construct with the Astronautics Corporation of America have developed a refrigerator with out a standard gas-compression cooling system. Magnetic refr ....etc

[:=Read Full Message Here=:]

Power frequency magnetic fields as high as 15,000,000 milligauss are commonly found internally in equipment such as power transformers, motors and generators .Although these fields are almost contained within the equipment ,some leakage will occur. This paper concentrates on magnetic fields in the range of zero to several hundred milligauss. This level of magnetic field may be experienced by the general public as a result of operation of electrical equipment, current carrying lines, house wiring, electrical appliances, lighting equipment or an ....etc

[:=Read Full Message Here=:]

respected sir,
pls send us the details about mini project in SRM college website free report powerpoint format to this one......... ....etc

[:=Read Full Message Here=:]

Introduction

Couplers, also known as isolators because they electrically isolate as well as transmit data, are widely used in industrial and factory networks, instruments, and telecommunications. Every one knows the problems with optocouplers. They take up a lot of space, are slow, optocouplers age and their temperature range is quite limited. For years, optical couplers were the only option. Over the years, most of the components used to build instrumentation circuits have become ever smaller. Optocoupler technology, however, hasn't kept ....etc

[:=Read Full Message Here=:]