Large amounts of renewable energy resources is a step necessary to achieve a clean and secure electric power industry. The storage in future grids is receiving the attention from the system designers, grid operations and regulators.

need for storage:
The meeting of the North American Electric distribution association suggested the use of storage from large-scale bulk-storage systems to small units at
or near the point of load. The plug-in hybrid electric vehicles will also drive the development of the grid.

Spectrum of E ....etc

[:=Read Full Message Here=:]

ABSTRACT
Approximately one third of all CO2 emissions due to human activity come from fossil fuels used for generating electricity, with each power plant capable of emitting several million tones of CO2 annually. A variety of other industrial processes also emit large amounts of CO2 from each plant, for example oil refineries, cement works, and iron and steel production. These emissions could be reduced substantially, without major changes to the basic process, by capturing and storing the CO2. Other sources ....etc

[:=Read Full Message Here=:]

PRESENTED BY :
PAVAN.A & ASHISH


Introducing PowerPoint 2007
 WHAT IS CCS?
 CCS is a system of technologies that integrates three stages: CO2 capture, CO2 transport and geologic CO2 storage.
 Various technologies with different degrees of maturity are competing to be the low-cost solution for each stage of the CCS value chain
 FUEL
 COAL AS A MAJOR SOURCE
 COAL IN INDIA
 Usage of coal foe generation of power results in the production on co2
 From the graph it evide ....etc

[:=Read Full Message Here=:]

i want ppt presentaion of capturing router congestion and delay any one have details please send to my mail id [email protected]
i will we very thank ful to you. ....etc

[:=Read Full Message Here=:]

What are the materials used for capturing of carbon dioxide and storage? ....etc

[:=Read Full Message Here=:]

Capturing Router Congestion and Delay

Abstract:
Using a unique monitoring experiment, we capture all packets crossing a (lightly utilized) operational access router from a node provider, and use them to provide a detailed examination of router congestion and packet delays. The complete capture enables not just statistics as seen from outside the router, but also an accurate physical router model to be identified. This enables a comprehensive examination of congestion and delay from three points of view: the understanding of origins, ....etc

[:=Read Full Message Here=:]

presented by:
Bibi Mohanan


CARBON DIOXIDE LASER
A test target is vaporized and bursts into flame upon irradiation by a high power continuous wave carbon dioxide laser emitting tens of kilowatts of infrared light
Introduction
 Operates in middlle infrared region(10.6 μm &9.4 μm )
 Operates on rotational –vibrational transitions
 Both cw & pulsed laser output
 Cw power greater than 100kw
 Pulsed energies of 10 kJ
 Physical arrangement :a gas filled tube between a pair of mir ....etc

[:=Read Full Message Here=:]

Hello admin, please help me with full materials of carbondioxide capturing and storage. ....etc

[:=Read Full Message Here=:]

CARBONDIOXIDE CAPTURING AND STORAGE
ABSTRACT
Approximately one third of all CO2 emissions due to human activity come from fossil fuels used for generating electricity, with each power plant capable of emitting several million tones of CO2 annually. A variety of other industrial processes also emit large amounts of CO2 from each plant, for example oil refineries, cement works, and iron and steel production. These emissions could be reduced substantially, without major changes to the basic process, by ....etc

[:=Read Full Message Here=:]

Development of the Carbon Fiber Reinforced Carbon-carbon Composite for High Temperature Gas-cooled Reactors
In the present paper. details of the development of the candidate CIC composite are described. In the material development, especially, feasibility of the production. stableness of the supply and cost are much taken into consideration. As the physical properties of the material, high mechanical strength such as tensile and bending, high fracture strain and fracture toughness and low dimensional change by neutron ....etc

[:=Read Full Message Here=:]