hello guys,
I, Vinay, doing my 6th sem engineering, am interested in doing a FINAL YEAR PROJECT IN ELECTRONICS AND COMMUNICATION. I basically want to apply electronics in agriculture. So I thought of doing a project on ground information collection device using microcontroller. I have a vague idea of transmitting a signal of particular frequency and depending on different dielectric constants of different minerals in the soil,received signals will be of different frequencies. The information should be sent to a base station whe ....etc

[:=Read Full Message Here=:]

The dream of every communication designer is to provide good quality service to each of his customer within the limited available bandwidth. But in the recent years, the amount of data flowing through the channel has increased. But there has been no such high increase in the available bandwidth. So it is a challenge to effectively utilize the channel spectrum along with providing good quality of service across wireless links. One of the possible ways is to use multiple antennas at both the ends of the transmission link. MIMP exploits natural ph ....etc

[:=Read Full Message Here=:]

Introduction
In computing, input/output, or I/O, refers to the communication between an information processing system (such as a computer), and the outside world – possibly a human, or another information processing system. Inputs are the signals or data received by the system, and outputs are the signals or data sent from it. The term can also be used as part of an action; to perform I/O is to perform an input or output operation. I/O devices are used by a person (or other system) to communicate with a computer. ....etc

[:=Read Full Message Here=:]

This article presents a class which can be used in both the client and server code. The class uses IOCP (Input Output Completion Ports) and asynchronous (non-blocking) function calls which are explained later

With this simple report you could understood :

Service or connect to multiple clients and servers.

Send or receive files asynchronously.

Create and manage a logical worker thread pool to process heavier client/server requests or computations.

It is difficult to find a comprehensive but simple source code to handle client/se ....etc

[:=Read Full Message Here=:]

information about computer input & output device in marathi
....etc

[:=Read Full Message Here=:]

Abstract :-
Many host-based anomaly detection techniques have been proposed to detect code-injection attacks on servers. The vastmajority, however, are susceptible to mimicry attacks in which the injected code masquerades as the original server software,including returning the correct service responses, while conducting its attack. Behavioral distance, by which two diverse replicasprocessing the same inputs are continually monitored to detect divergence in their low-level (system-call) behaviors and hencepotentially the compromise of one of t ....etc

[:=Read Full Message Here=:]

Hi there,
I need help with this topic. Does anyone know how to implement this with Matlab. ....etc

[:=Read Full Message Here=:]

Hi,

It would be great if i could review any project done on the study of increasing a PV module output using mirriors or any design for a concentrators for a trough system . thanks

Regards

A9913882 ....etc

[:=Read Full Message Here=:]

A Linux Device Driver for USB to USB Direct Link Device

The first version of the Universal Serial Bus (USB) specification was released in January 1996. In April 2000, version 2.0 of the USB specification, which supports transfer rates up to 480 Mbps, was released. Because of its low cost, high data-transfer rate, ease of use, and flexibility, USB has gained wide acceptance in the computer industry. Today, many peripherals and devices connect to computers through USB interfaces. Currently, most general-purpose operating systems pro ....etc

[:=Read Full Message Here=:]

hai friends if anybody had already done your project then please send me that ppt.. ....etc

[:=Read Full Message Here=:]