SYNOPSIS
In the present scenario of automobile industry manufacturers are trying to produce comfortable and safe vehicles which the consumers are looking for. A shock absorber is a damping element of the vehicle suspension, and its performance directly affects the comfortability, dynamic load of the wheel and dynamic stroke of the suspension. The conventional type of shock absorbers has got the main drawback that it causes foaming of the fluid at high speeds of operation. This results in a decrease of t ....etc

[:=Read Full Message Here=:]

Presented By:
santosh
anakapalle.


ABSTRACT
Solar panel converts the light energy from the sun into electrical energy. In ordinary solar panel systems, the solar panel is fixed in a particular direction. The solar panel delivers maximum energy only when it faces directly towards the sun. Since the sun is moving continuously, the solar panel cannot deliver maximum energy when the solar panel fixed at one direction.
The goal of the project is to control the solar panel cont ....etc

[:=Read Full Message Here=:]

friends i want full documentation on this topic of eye movement based _human computer interaction techniqes plss send my mail [email protected] ....etc

[:=Read Full Message Here=:]

Kindly provide mumbai monorail ppt for a seminar related to civil engineering 4th year stueent. ....etc

[:=Read Full Message Here=:]

Hi I am Al. :). I would like to get details on 3d solar cells seminar. I am right now quite interested with this topic. So I hope you could help me. ....etc

[:=Read Full Message Here=:]

WELDING ROBOT USING A COMPUTATIONAL
MONO-OCULAR VISION SYSTEM



ABSTRACT
In automatic production lines using welding processes, robots are used to move the welding torch. But for the robot to weld it is normally that it has been previously programmed to follow a predetermined trajectory. If the location of the pieces to be welded changes for any reason, all the programming will have to be redone. One way to eliminate the robot programming is to use a visi ....etc

[:=Read Full Message Here=:]

i want seminar report on eyephone as its my seminar topic
....etc

[:=Read Full Message Here=:]

AUTOMOBILE EMISSIONS CONTROL AND MONITORING BY MONOPOLE MAGNETIC DEVICE AND REMOTE SENSING TECHNOLOGY
Abstract
Monopole magnetic device and Remote Sensing Technology (RST) are used to monitor and control automobile emissions to prevent the pollution and protect the environment. Monopole magnetic device reduces the level of noxious gases in exhaust fumes of vehicles. The carbon monoxide (co) level is reduced almost zero in the vehicles. It also claims a substational reduction in hydrocarbon emission in all the vehicles. T ....etc

[:=Read Full Message Here=:]

A virtual retinal display (VRD), also known as a retinal scan display (RSD), is a new display technology that draws a raster display (like a television) directly onto the retina of the eye. The user sees what appears to be a conventional display floating in space in front of them. In the past similar systems have been made by projecting a defocused image directly in front of the user's eye on a small screen, normally in the form of large sunglasses. The user focused their eyes on the background, where the screen appeared to be floating. The d ....etc

[:=Read Full Message Here=:]

Summary
This paper presents a new empirical method for de-noising ofocular artifacts in the electroencephalogram (EEG) records. Inmany biomedical signal processing approach, source signals arenoisy and some have kurtosis close to zero. These noise sourcesincrease the difficulty in analyzing the EEG and obtaining theclinical information. To remove this artifacts a method basedon Donoho’s de-noising method is used. Recently StationaryWavelet Transform (SWT) has been used to de-noise thecorrupted EEG signals. In this paper, statistical ....etc

[:=Read Full Message Here=:]

WELDING ROBOT USING A COMPUTATIONAL
MONO-OCULAR VISION SYSTEM



ABSTRACT
In automatic production lines using welding processes, robots are used to move the welding torch. But for the robot to weld it is normally that it has been previously programmed to follow a predetermined trajectory. If the location of the pieces to be welded changes for any reason, all the programming will have to be redone. One way to eliminate the robot programming is to use a visi ....etc

[:=Read Full Message Here=:]

Summary
This paper presents a new empirical method for de-noising ofocular artifacts in the electroencephalogram (EEG) records. Inmany biomedical signal processing approach, source signals arenoisy and some have kurtosis close to zero. These noise sourcesincrease the difficulty in analyzing the EEG and obtaining theclinical information. To remove this artifacts a method basedon Donoho’s de-noising method is used. Recently StationaryWavelet Transform (SWT) has been used to de-noise thecorrupted EEG signals. In this paper, statistical ....etc

[:=Read Full Message Here=:]

OPTIMIZATION OF CURE CYCLE TIME OF A BIAS TRUCK LUG TYRE BY STUDYING THE CURE EQUIVALENTS IN ISOTHERMAL AND NON-ISOTHERMAL CONDITIONS


INTRODUCTION
Curing is a process in which the viscoelastic rubber is converted into three-dimensional networks by tying up of all independent chains. Uncured rubber is a viscoelastic fluid, which has poor physical properties and undergoes deformation easily. Curing process reduces the flow of rubber material. And also reduces the amount of permanent deformation after the removal of deforming ....etc

[:=Read Full Message Here=:]