MODELLING AND SIMULATION OF SOFT-SWITCHING DC/DC CONVERTER WITH HIGH VOLTAGE GAIN



INTRODUCTION

Recently, the demand for dc/dc converters with high
voltage gain has increased. The energy shortage and
atmosphere pollution have led to more researches on the
renewable and green energy sources such as the solar
arrays and the fuel cells. Moreover, the power systems
based on battery sources and super capacitors have been
increased. Unfortunately, the output voltages of these
....etc

[:=Read Full Message Here=:]

Abstract –
This paper presents the work that is beingdone as a part of the ByFault project (Brite/Euramprojet finaced by the European Community):manufacturing, modelling and simulation of aSuperconducting Hybrid Fault Current Limiter(SHFCL). The SHFCL is based on a variableimpedance transformer: primary winding is in serieswith the protected line and several secondaries areshort-circuited by superconducting elements. Thistopology has been modelled using 2-D and 3-D finiteelements, and some useful formulation to simulate thebehaviour ....etc

[:=Read Full Message Here=:]

details+ content of modelling and simulation of ecg
....etc

[:=Read Full Message Here=:]

give me the project report RELATED TO MODELING AND SIMULATION OF WIND ENERGY POWER SYSTEM ....etc

[:=Read Full Message Here=:]

Cooperative Cache Technique using OMNeT - IEEE Journal Technology Simulation Project - B.Tech/M.Tech/Research Level

This IEEE Journal Technology Simulation Project is the simulation of Co-operative Cache in Network (P2P) using OMNeT++ 3.2 tool. This simulation is achieved using Cache Node (CN) and Search Node (SN) technique based on technique published on IEEE Transaction paper.
....etc

[:=Read Full Message Here=:]

DESIGN AND MODELLING OF CUPOLA

DONE BY
CEASE JUNIOR
FIJO GEORGE
FOUZIYA C M
HAREESH MOHANAN
JESBIN JOSE
JIBIN JOSEPH

CONTENTS
OBJECTIVE OF PROJECT
INTRODUCTION
CONSTRUCTION
CUPOLA OPERATIONS
ADVANTAGES AND LIMITATIONS
DESIGN CONSIDERATIONS
DESIGN
FABRICATION DETAILS
BIBLIOGRAPHY

OBJECTIVE OF PROJECT
TO DESIGN AND FABRICATE A MODEL OF SIZE 2 CUPOLA IN THE RATIO 1:2
FURNACES
FURNACES ARE OF TWO TYPES
1. BLAST FURNACES
2. FOUNDRY FURNACES
Blast furnaces performs basic melt ....etc

[:=Read Full Message Here=:]

i need fulldetails about this paper ....etc

[:=Read Full Message Here=:]

i want modelling and thermal analysis of diesel engine piston with catia and ansys pdf material ....etc

[:=Read Full Message Here=:]

Presented By:
Marcin Janicki*, Marcin Daniel, Michal Szermer, Andrzej Napieralski

Abstract
The proper design and simulation of modern electronic microsystems oriented towards environment monitoring requires accurate models of various ambient sensors. In particular, this paper presents a comprehensive model of an ion sensitive field effect transistor (ISFET). The model can be employed straightforwardly for simulations at device, circuit or system level. First, the model was validated with electrical measurements a ....etc

[:=Read Full Message Here=:]

complete report and synopsis for modelling and detection of c worm project ....etc

[:=Read Full Message Here=:]