details+ content of modelling and simulation of ecg
....etc

[:=Read Full Message Here=:]

MODELLING AND SIMULATION OF SOFT-SWITCHING DC/DC CONVERTER WITH HIGH VOLTAGE GAIN



INTRODUCTION

Recently, the demand for dc/dc converters with high
voltage gain has increased. The energy shortage and
atmosphere pollution have led to more researches on the
renewable and green energy sources such as the solar
arrays and the fuel cells. Moreover, the power systems
based on battery sources and super capacitors have been
increased. Unfortunately, the output voltages of these
....etc

[:=Read Full Message Here=:]

Abstract –
This paper presents the work that is beingdone as a part of the ByFault project (Brite/Euramprojet finaced by the European Community):manufacturing, modelling and simulation of aSuperconducting Hybrid Fault Current Limiter(SHFCL). The SHFCL is based on a variableimpedance transformer: primary winding is in serieswith the protected line and several secondaries areshort-circuited by superconducting elements. Thistopology has been modelled using 2-D and 3-D finiteelements, and some useful formulation to simulate thebehaviour ....etc

[:=Read Full Message Here=:]

i want modelling and thermal analysis of diesel engine piston with catia and ansys pdf material ....etc

[:=Read Full Message Here=:]

Presented By:
H-L Lin1, T Chou2, and C-P Chou2
Department of Vehicle Engineering, Army Academy R.O.C
Abstract:
Many parameters affect the quality of the resistance spot welding (RSW) process. It is not easy to obtain optimal parameters of the RSW process in the automobile industry. Conventionally, the Taguchi method has been widely used in engineering; however, with this method the desired results can only be obtained with the use of very discrete control factors, thus leading to uncertainty about the real optimum. In the process ....etc

[:=Read Full Message Here=:]

Prepared by:
MUHAMMAD NASIRUDDIN MAHYUDDIN


Introduction

The first step is to determine tha control. The purpose of the control law is to allow us to assign a set of pole locations for the closed-loop system that will correspond to satisfactory dynamic response in terms of rise time and other measure of transient response.
Then, secondly, we show how to introduce the reference input with full-state feedback. We describe the process of finding the poles for good design. In the second step, If t ....etc

[:=Read Full Message Here=:]

DESIGN AND MODELLING OF CUPOLA

DONE BY
CEASE JUNIOR
FIJO GEORGE
FOUZIYA C M
HAREESH MOHANAN
JESBIN JOSE
JIBIN JOSEPH

CONTENTS
OBJECTIVE OF PROJECT
INTRODUCTION
CONSTRUCTION
CUPOLA OPERATIONS
ADVANTAGES AND LIMITATIONS
DESIGN CONSIDERATIONS
DESIGN
FABRICATION DETAILS
BIBLIOGRAPHY

OBJECTIVE OF PROJECT
TO DESIGN AND FABRICATE A MODEL OF SIZE 2 CUPOLA IN THE RATIO 1:2
FURNACES
FURNACES ARE OF TWO TYPES
1. BLAST FURNACES
2. FOUNDRY FURNACES
Blast furnaces performs basic melt ....etc

[:=Read Full Message Here=:]

Presented By:
Marcin Janicki*, Marcin Daniel, Michal Szermer, Andrzej Napieralski

Abstract
The proper design and simulation of modern electronic microsystems oriented towards environment monitoring requires accurate models of various ambient sensors. In particular, this paper presents a comprehensive model of an ion sensitive field effect transistor (ISFET). The model can be employed straightforwardly for simulations at device, circuit or system level. First, the model was validated with electrical measurements a ....etc

[:=Read Full Message Here=:]

Abstract

In paper the fundamental question about optimal interaction between the controlling stimuli generated by the active (powered) and the passive (unpowered) drives of the robotic systems have been studied. A mathematical statement of the problem has been proposed that is suitable to study this question for the semi-passively actuated n-degree-of-freedom robotic systems. The problem is formulated as an optimal control problem for n-degree-of-freedom mechanical system models a semi-passively actuated robot. We take into account the inter ....etc

[:=Read Full Message Here=:]

give me the project report RELATED TO MODELING AND SIMULATION OF WIND ENERGY POWER SYSTEM ....etc

[:=Read Full Message Here=:]