MOSFET
Metal Oxide Semiconductor Field Effect Transistors
 Different types of FETs
 Junction FET (JFET)
 Metal-Oxide-Semiconductor FET (MOSFET)
 Metal-Semiconductor FET (MESFET)
 Different types of FETs
 Junction FET (JFET)
 Different types of FETs
 Metal-Oxide-Semiconductor FET (MOSFET)
 Different types of FETs
 Metal-Semiconductor FET (MESFET)
Basic MOSFET (n-channel)
 The gate electrode is placed on top of a very thin insulating layer.
 There are a pair of s ....etc

[:=Read Full Message Here=:]

Strong Field-Effect in Graphene on SiC



Graphene, consisting of monolayer thick carbon, can be produced as an isolated layer (exfoliated graphite) or as an epitaxial layer on a SiC(0001) surface. We have used the latter method to produce graphene on 4H-SiC by heating at 1300°C in ultra-high vacuum with in-situ monitoring by electron diffraction. The graphene formation is performed at CMU, while transistor fabrication (with 1.5x0.5 mm2 channel area) is performed at Sarnoff Corp. A ....etc

[:=Read Full Message Here=:]

ISFET is an ion-sensitive field-effect transistor used to measure ion concentrations in solution and is a new type of miniaturised semiconductor chemical sensor. It is based on the structure of the metal-insulator-semi-conductor field-effect transistor (MISFET) in which a metal gate is replaced by an ion selective membrane, an electrolyte and a reference electrode here when the ion concentration (such as pH) changes, the current through the transistor will change accordingly. Here, the solution is used as the gate electrode. A voltage between s ....etc

[:=Read Full Message Here=:]

This article describes the effect of tower displacement of two parallel transmission lines on the magnetic field distribution. Here, two parallel lines with the same working voltage and having the same span and in which the use of artificial tower displacement is made is modeled.Parallel transmission lines with different span lengths and different voltages produce tower displacements naturally and this is also modeled. Additionally, the effects like the spacing between the parallel lines, phase conductors arrangements and the transmission line ....etc

[:=Read Full Message Here=:]

Differences between single effect evaporator and multiple effect evaporator ....etc

[:=Read Full Message Here=:]

Prospect of P3HT Field effect transistors



Ohmic contact

Metal semiconductor contacts having a linear I-V characteristic in both biasing directions .
Ideally, Showing minimum contact resistance.
There will be no depletion width.
Ideally, Built-in potential is zero.
Electron flow between metal and semiconductor, Potential barrier is small and easily overcome by the application of small voltage.

Conclusion

P3HT FET hole mobility is stil ....etc

[:=Read Full Message Here=:]

Presented By:
Marcin Janicki*, Marcin Daniel, Michal Szermer, Andrzej Napieralski

Abstract
The proper design and simulation of modern electronic microsystems oriented towards environment monitoring requires accurate models of various ambient sensors. In particular, this paper presents a comprehensive model of an ion sensitive field effect transistor (ISFET). The model can be employed straightforwardly for simulations at device, circuit or system level. First, the model was validated with electrical measurements a ....etc

[:=Read Full Message Here=:]

Ham Radio depends on Emergency Power!

It’s a whole new world of Power

Prius / Power / Energy / Solar

Getting Good Gas Mileage

The best way. Just drive

smaller cars!... Cheap!


Getting Good Gas Mileage?

USA Demand…

Or is it Detroit Marketing?
Why Fuel Efficiency?

Who was key-note speaker to Electric Vehicle Association?
Ex-head of CIA

Why is government interested in Fuel Economy?
$200,000,000 per day for Middle East Oil
How many Terrorists does that support?
Gas costs us $400/g ....etc

[:=Read Full Message Here=:]

Fault Location for Power Transmission Systems Using Magnetic
Field Sensing Coils

by
Kurt Josef Ferreira
A Thesis
Submitted to the Faculty
of the
WORCESTER POLYTECHNIC INSTITUTE
In partial fulfillment of the requirements for the
Degree of Master of Science
in
Electrical and Computer Engineering


Abstract


The detection and location of faults on power transmission lines is essential to the protection and maintenance of a power system. Most methods of fault detection and location rely on measurements of e ....etc

[:=Read Full Message Here=:]

hello i am final year electrical engineering student. i want to know how to make Electronic Power Generator using Transistor project. ....etc

[:=Read Full Message Here=:]