i want to design a voltage transmitter which can transmit small voltage upto 5volt and a reciever circuit to recieve this voltage ,and to on LED from the recieved voltage.....im will be very thankful to you if you provide me a circuit for this with discribtion....... ....etc

[:=Read Full Message Here=:]

Understanding Operational Amplifier Specifications




Introduction

The term operational amplifier, abbreviated op amp, was coined in
the 1940s to refer to a special kind of amplifier that, by proper
selection of external components, can be configured to perform a
variety of mathematical operations. Early op amps were made
from vacuum tubes consuming lots of space and energy. Later op
amps were made smaller by implementing them with discrete
transistors ....etc

[:=Read Full Message Here=:]

Characteristics of Operational Amplifiers

In analog computers and similar circuits, we make the assumption that the key component of the circuit — the operational amplifier — is perfect and ideal, with an infinite voltage gain and zero input current. Unfortunately, this is not possible in real-world devices. The questions we need to answer, then, are: how close can we come to the ideal, and how much error will be introduced into the results?
________________________________________
A very typical ....etc

[:=Read Full Message Here=:]

feasibility study for online shopping site ....etc

[:=Read Full Message Here=:]

Solutions to Practical Unit Commitment Problems with Operational, Power Flow and Environmental Constraints
Presented By:
I. Jacob Raglend and Narayana Prasad Padhy1


Abstract”
In this paper, an algorithm to solve environmental constrained unit commitment problem (UCP) with operational and power flow constraints has been developed to plan an economic and secure generation schedule. Both Economic load dispatch (ELD) and Economic emission dispatch (EED) have been applied to obtai ....etc

[:=Read Full Message Here=:]

OPERATIONAL AMPLIFIERS
OPERATIONAL AMPLIFIERS (OP-AMP)
The standard operational amplifier (op-amp) symbol is shown in Figure 12-1(a). It has two terminals, the inverting input
(-) and the non inverting input (+), and one output terminal. The typical op-amp operates with two dc supply voltages, one positive and the other negative, as shown in Figure 12-1(b). Usually these dc voltage terminals are left off the schematic symbol for simplicity but are always understood to be there.
The Ideal Op-Amp
The ideal op-a ....etc

[:=Read Full Message Here=:]

i want to get all idea of feasiblity study of online shoppingo? ....etc

[:=Read Full Message Here=:]

mini project for eletronics and communication engineering student with circut daigram ....etc

[:=Read Full Message Here=:]

PERFORMANCE EVALUATION OF OPERATIONAL PARAMETERS ON RFID CONTROLLED CONVEYOR SYSTEM.

ABSTRACT: RFID has been taking great attention of industry for its various advantages. This technology enables to monitor and track items in production facilities, warehouse operations, and distributions. However, RFID system performance is dramatically affected from the operational setting of the system. In particular, identification of appropriate levels for each operational factor is not trivial. In this project, we demonstrate an effective methodology to ....etc

[:=Read Full Message Here=:]

Operational and technical aspects of cluster munitions

Mark HIZNAY

Many military establishments believe that cluster munitions increase the efficiency of suppressing, killing or destroying multiple targets within an area and they remain a key military equity. First used in the Second World War and used in 21 states since then, their technology has evolved and they are today perceived as a significant component in the self-defense capability of many states. However, cluster munitions have also demonstrated sev ....etc

[:=Read Full Message Here=:]