REVIEW OF INCONSISTENCIES BETWEEN SUDAS AND IOWA
DOT SPECIFICATIONS


MAY 2006
SUBMITTED TO:
Iowa Highway Research Board
Iowa Department of Transportation
Center for Transportation Research and Education
Project Number: TR-524
By:
Wade A. Greiman, P.E.
Snyder & Associates, Inc.



Introduction
The Iowa Department of Transportation’s Standard Specifications for Highway and Bridge
Construction were originally developed with highway construction in rural areas. ....etc

[:=Read Full Message Here=:]

SPECIFICATIONS




Link Budget Calculations


Gain of parabolic Antenna
G = eta(10.472 f D)2
G = 33.06 dB
Transmitting Power = 100W = 40dBW
Cable losses = 2 dB.
EIRP =G + PS – (Cable loss)
=33.06 – 2 -10 log(100) = 51 dBW


Antenna Specs.


Frequency Range – 2 to 2.5Ghz
Diameter(D) – 2.7m
Gain = 33.06dB @ 2.25Ghz
Beam Width = 3.45o @ 2.25Ghz
Focal length(f) = 1.35m
f/D = 0.5
Depth(d) = 0.3375m

LNA specs.[/b ....etc

[:=Read Full Message Here=:]

give rules for high density bipolar 3 code decoder rules ....etc

[:=Read Full Message Here=:]

Communicating by hdb3 Arduino ?
Arduinos want to communicate two ethernet HDB3 coded to send data and recivirlos, you can read them but I have doubts on how to do I can help ....etc

[:=Read Full Message Here=:]

Understanding Operational Amplifier Specifications




Introduction

The term operational amplifier, abbreviated op amp, was coined in
the 1940s to refer to a special kind of amplifier that, by proper
selection of external components, can be configured to perform a
variety of mathematical operations. Early op amps were made
from vacuum tubes consuming lots of space and energy. Later op
amps were made smaller by implementing them with discrete
transistors ....etc

[:=Read Full Message Here=:]

A Design of HDB3 CODEC Based on FPGA


ABSTRACT
The basic principles and structure of HDB3 was briefly introduced in this paper, and the shortcomings of the existing HDB3 encoder and decoder was analyzed. Then a new design of HDB3 encoder and decoder based on FPGA was proposed, and the hardware design circuit and software simulation were introduced. The simulation was achieved through the VERILOG-HDL in EP2C35F672C8 chip of CycloneII series in the d ....etc

[:=Read Full Message Here=:]

sir i want the full report that is helpful in my project topic & give the new idea about this topic & mail to: [email protected] ....etc

[:=Read Full Message Here=:]

Submitted to:
Ms. Mamta Sakpal
Ms. Sushma Khatri
Ms. Preeti Jain

Submitted by:
Prakhar Jain (67)
Pranjal Solanki(69)
Prerna Sisodia(72)
Mr. Raman Bhati


1. Introduction

1.1 Purpose
In last few years the potential growth in digitization of images has occurred,with immense amount of information flowing and stored in the database of world wide web.the No. of users exploiting the WWW ha ....etc

[:=Read Full Message Here=:]

Software Requirements Specifications for Online Bookshop System



Introduction

1.1 Purpose
This document goes through and attempts to define the general requirements for a online bookshop
system, given the brief mission statement. In this document there are presented the functional and
non-functional requirements for the system. The overall description describes the product and what
assumptions and constraints were put into place. The last sectio ....etc

[:=Read Full Message Here=:]

Hi am ElMehdi, I would like to get details on simulink hdb3 .. I think that this is not available by default in the simulink tool, I need to do a simulation of a transmission chain that uses a digital entery coded in HDB3 as an information to modulate it and transmit it after that. ....etc

[:=Read Full Message Here=:]