With the day to day improvement in the field of medicine the urban society is enjoying a healthy life, but for the people of rural and remote areas even the basic health care is not sufficiently available. For the rural masses to enjoy the breakthroughs in the field of medicine, â„¢Telemedicineâ„¢ can be used. The present form of telemedicine does not suit the Indian scenario due to the described factors. To make telemedicine suitable for Indian conditions we design a low cost, efficient prototype system making use of fixed Wireless In ....etc

[:=Read Full Message Here=:]

IMPROVEMENT OF THERMAL EFFICIENCY BY RECOVERY OF HEAT FROM IC ENGINE EXHAUST
(THERMAL SCIENCES)
CONTENTS:
1. ABSTRACT
2. INTRODUCTION
3. PRINCIPLE OF HEAT RECOVERY FROM IC ENGINE
4. NECESSITY OF THERMAL STORAGE SYSTEM
5. LATENT HEAT THERMAL STORAGE SYSTEM
6. EXPERIMENTAL SETUP
7. RESULTS AND DISSCUSSIONS
8. PERFORMANCE CHARACTERISTICS STUDY
9. CONCLUSION
IMPROVEMENT OF THERMAL EFFICIENCY BY RECOVERY OF HEAT FROM IC ENGINE EXHAUST
ABSTRACT
The steady increased consumption of fuel and power over the years have ....etc

[:=Read Full Message Here=:]

Relative roles of CFD and wind tunnel testing in the development of aircraft

Introduction
CFD
CFD is computational technology that enables us to study the dynamics of things that flow.
Using CFD, a computational model that represents a system or device that we want to study is built. Then we apply the fluid flow physics to this virtual prototype, and the software outputs a prediction of the fluid dynamics.

Application
fluid flow, heat transfer , mass , phase change , chemical re ....etc

[:=Read Full Message Here=:]

Abstract:

Scissor jacks are simple mechanisms used to drive large loads for short distances. The power screw design of common scissor jack reduces the amount of force required by the user to drive the mechanism. Most scissor jacks are similar in design, consisting of four main members driven by a power screw. In this report, a unique design of a scissor jack is proposed which is very easy to manufacture. Each member, including the power screw sleeves, is made of the common c-shape. This eliminates the need for machined power s ....etc

[:=Read Full Message Here=:]

Hello,
This is Bakul Shinde.. Im into 3rd year of Mechanical Engineering Degree.. I need info about the Hydraulic or motor operated Screw jack used in vehicles. In the current scenario when the car gets punctured the driver has t remove the jack from the car and sit down and rotate the jack to lift the car to put the spare wheel.. What I want is if I use a motor operated screw jack then I dont need to use my energy instead I will run the motor with the help of car battery and life the car.. I hope you got my idea..
Expecting a r ....etc

[:=Read Full Message Here=:]

plz give me details regarding the project topic..... ....etc

[:=Read Full Message Here=:]

give me a ppt about power screw and allpications ....etc

[:=Read Full Message Here=:]

ABSTRACT:
A good automobile shop must have equipment to undertake all types of fault finding and servicing jobs. The tools and equipment which are must in the auto shop are namely screw drivers, spanners, hydraulic lift, wheel balancing equipment etc. One of the important equipments is the hydraulic lift which can be a 2-post, 4-post, 6-post which is used to lift the vehicles to a comfortable height in order to work under it. For the same purpose the latest equipment used is the Screw Auto Lift.
Much of the fatigue damage in th ....etc

[:=Read Full Message Here=:]

send me complete project report on design and fabrication of screw conveyor ....etc

[:=Read Full Message Here=:]

A feed passage 5 extends through one of the trunnions and suitable means such as screw conveyor 6 are provided for conveying the material to be ground through such passage and into the grinding chamber 7. A discharge passage 8 extends through the other trunnion and communicates with discharge spouts 9 and 10 for the ground material.bcone crusher spares for in South Africa A screen or perforated member 11 of suitable mesh may be provided for permitting only the iiner material to enter the discharge spout 19 hts.40min.any coarse material being di ....etc

[:=Read Full Message Here=:]