ABSTRACT
A surface micro machined capacitive switch has been designed and fabricated on a glass substrate. The switch is constructed of a thin metallic membrane crossing over an electroplated coplanar wave-guide transmission line. The electrostatic actuation is utilized as the switching mechanism. The actuation voltage is around 50V. The switch showed low insertion loss of 0.1 dB at 10 GHz and 0.4 dB at 25 dB, and isolation of 15dB at 20GHz. This device offers a potential application in tel ....etc

[:=Read Full Message Here=:]

Compound solid state switches such as GaAs MESFETs and PIN diodes are widely used in microwave and millimeter wave integrated circuits (MMICs) for telecommunications applications including signal routing, impedance matching networks, and adjustable gain amplifiers. However, these solid-state switches have a large insertion loss (typically 1 dB) in the on state and poor electrical isolation in the off state. The recent developments of micro-electro-mechanical systems (MEMS) have been continuously providing new and improved paradigms in the field ....etc

[:=Read Full Message Here=:]

can anyone provide me the abstract/information of MEMS accelerometer based speaking microcontroller for deaf and dumb? ....etc

[:=Read Full Message Here=:]

Micro-electro Mechanical Systems (MEMS)

Introduction
The satellite industry could experience its biggest revolution since it joined the ranks of commerce, thanks to some of the smallest machines in existence. Researchers are performing experiments designed to convince the aerospace industry that microelectromechanical systems (MEMS) could open the door to low-cost, high-reliability, mass-produced satellites.MEMS combine conventional semiconductor electronics with beams, gears, levers, switches, accelerometers, diaphragms, microfluidic thrus ....etc

[:=Read Full Message Here=:]

APPLICATION OF MEMS TECHNOLOGY

ABSTRACT

MEMS (Micro-electro mechanical system) devices combines the merits of both electronic and mechanical systems .The MEMS technology has seen expansion in broad range from mechanical to chemical ,optical to bio-tech and many other fields .It is the integration of mechanical elements ,sensors ,actuators and electronics components on a single silicon substrate through micro fabrication technology .In this paper ,different MEMS devices are demonstrated like nanosatellite ,MEMS optical devices and bio-t ....etc

[:=Read Full Message Here=:]

The satellite industry could experience its biggest revolution since it joined the ranks of commerce, thanks to some of the smallest machines in existence. Researchers are performing experiments designed to convince the aerospace industry that microelectromechanical systems (MEMS) could open the door to low-cost, high-reliability, mass-produced satellites. MEMS combine conventional semiconductor electronics with beams, gears, levers, switches, accelerometers, diaphragms, microfluidic thrusters, and heat controllers, all of them microscopic in s ....etc

[:=Read Full Message Here=:]

MEASURING AND TRANSMITTING VITAL BODY SIGNS USING MEMS SENSORS.

With advancement in technology and science electronics have been getting smaller and smaller, which enables researchers and scientist to weave the electronics and interconnections into the fabrics. This new technology enables to establish a new concept called electronics textiles (e-textiles) which allow cost-effective and efficient solutions for various applications.
In this project, the main idea is monitoring vital body signs by placing the electronics device into a garment ....etc

[:=Read Full Message Here=:]

MicroElectroMechanical Systems, MEMS, are systems based on a range of techologies whereby tiny mechanical elements, both sensors and actuators, can be implemented.It turns out that these elements have excellent system properties.The elements are often interfaced to microelectronical driving or sensing components (ICs) by appropriate packaging or on the same silicon wafer. The semiconductor silicon is not only good for making electronics but its material properties are extremely good.Thus, Micro electromechanical systems (MEMS) refer to a collec ....etc

[:=Read Full Message Here=:]

The satellite industry could experience its biggest revolution since it joined the ranks of commerce, thanks to some of the smallest machines in existence. Researchers are performing experiments designed to convince the aerospace industry that microelectromechanical systems (MEMS) could open the door to low-cost, high-reliability, mass-produced satellites.
MEMS combine conventional semiconductor electronics with beams, gears, levers, switches, accelerometers, diaphragms, microfluidic thrusters, and heat controllers, all of them microscopic in ....etc

[:=Read Full Message Here=:]

MINIATURE WIRELESS SENSOR, MEMS BASED, APPLICATION IN COLD CHAIN (FOOD/MEDICINE PROCESS) LOGISTICS WITH REAL TIME TEMPERATURE DATA STORAGE AND REMOTE DATA ACCESS USING SUPER RFID.

The cold chain logistics is a systematic project which ensure the temperature-sensitive product under the pro-established low temperature in every process of productionâ„¢s storage, transportation and sale which can make sure the products quality and reduce the logistics loss, Since the environment is changing vastly, and due to the limitation of tech and cost ....etc

[:=Read Full Message Here=:]